£23.98 inc. vat

£19.98 ex. vat

In Stock

Order within for delivery on Monday, 5th December

Click & Collect Available

HyperX Fury Series 4GB 1333MHz DDR3 CL9 DIMM Memory

  • Easy to install
  • features plug-and-play functionality
  • Automatic overclocking
  • Reliable 100% factory tested

View full description

QuickFind: 633832

Mfr part code: HX313C9F/4

{{#lists}}
  • {{ title }}
  • {{/lists}}

    HyperX Fury Series 4GB 1333MHz DDR3 CL9 DIMM Memory Product Description

    SPECIFICATIONS
    CL(IDD) 9 cycles
    Row Cycle Time (tRCmin) 49.125ns (min.)
    Refresh to Active/Refresh 260ns (min.)
    Command Time (tRFCmin)
    Row Active Time (tRASmin) 36ns (min.)
    Maximum Operating Power TBD W*
    UL Rating 94 V - 0
    Operating Temperature 0oC to 85o C
    Storage Temperature -55oC to +100o C
    *Power will vary depending on the SDRAM used.

    FEATURES
    • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
    • VDDQ = 1.5V (1.425V ~ 1.575V)
    • 667MHz fCK for 1333Mb/sec/pin
    • 8 independent internal bank
    • Programmable CAS Latency: 9, 8, 7, 6
    • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
    • 8-bit pre-fetch
    • Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
    • Bi-directional Differential Data Strobe
    • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
    • On Die Termination using ODT pin
    • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
    • Asynchronous Reset
    • PCB : Height 1.180" (30.00mm), single sided component

    HyperX Fury Series 4GB 1333MHz DDR3 CL9 DIMM Memory Product Reviews

    Technical Specifications

    General

    Capacity 4 GB
    Upgrade Type Generic

    Memory

    Type DRAM
    Technology DDR3 SDRAM
    Form Factor DIMM 240-pin
    Module Height (inch) 1.29
    Speed 1333 MHz ( PC3-10600 )
    Latency Timings CL9 ( 9-9-9-27 )
    Data Integrity Check Non-ECC
    Features Black PCB, FURY asymmetric heatspreader , unbuffered
    Module Configuration 512 x 64
    Voltage 1.5 V
    Lead Plating Gold

    Expansion / Connectivity

    Compatible Slots 1 x memory - DIMM 240-pin

    Miscellaneous

    Colour Category Blue

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    Customer Questions

    HyperX Fury Series 4GB 1333MHz DDR3 CL9 DIMM Memory Ask an owner

    HyperX Fury Series 4GB 1333MHz DDR3 CL9 DIMM Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.