Sorry, this product is currently out of stock

Enter your email address below if you would like to be informed when this product is back in stock.

HyperX Fury Red 4GB 1600MHz DDR3 CL10 DIMM Memory

  • Easy to install features plug-and-play functionality
  • Automatic overclocking
  • Reliable 100% factory tested

View full description

QuickFind: 633834

Mfr part code: HX316C10FR/4

  • {{ title }}
  • {{/lists}}

    HyperX Fury Red 4GB 1600MHz DDR3 CL10 DIMM Memory Product Description

    CL(IDD) 10 cycles
    Row Cycle Time (tRCmin) 48.125ns (min.)
    Refresh to Active/Refresh 260ns (min.)
    Command Time (tRFCmin)
    Row Active Time (tRASmin) 37.5ns (min.)
    Maximum Operating Power TBD W*
    UL Rating 94 V - 0
    Operating Temperature 0oC to 85o C
    Storage Temperature -55oC to +100o C
    *Power will vary depending on the SDRAM used.

    • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
    • VDDQ = 1.5V (1.425V ~ 1.575V)
    • 800MHz fCK for 1600Mb/sec/pin
    • 8 independent internal bank
    • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
    • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
    • 8-bit pre-fetch
    • Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
    • Bi-directional Differential Data Strobe
    • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
    • On Die Termination using ODT pin
    • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
    • Asynchronous Reset
    • PCB : Height 1.180" (30.00mm), single sided component

    HyperX Fury Red 4GB 1600MHz DDR3 CL10 DIMM Memory Product Reviews

    Technical Specifications


    Capacity 4 GB
    Upgrade Type Generic


    Type DRAM
    Technology DDR3 SDRAM
    Form Factor DIMM 240-pin
    Module Height (inch) 1.29
    Speed 1600 MHz ( PC3-12800 )
    Latency Timings CL10 ( 10-10-10-30 )
    Data Integrity Check Non-ECC
    Features Black PCB, FURY asymmetric heatspreader , unbuffered
    Module Configuration 512 x 64
    Voltage 1.5 V
    Lead Plating Gold

    Expansion / Connectivity

    Compatible Slots 1 x memory - DIMM 240-pin


    Colour Category Red

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    Customer Questions

    HyperX Fury Red 4GB 1600MHz DDR3 CL10 DIMM Memory Ask an owner

    HyperX Fury Red 4GB 1600MHz DDR3 CL10 DIMM Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.