£104.99 inc. vat

£87.49 ex. vat

In Stock

Click & Collect Unavailable

Paypal Credit Finance from £8.75
per month. Learn more
PayPal Credit - Buy now spread the cost

HyperX Impact Black 16GB 1866MHz DDR3L CL11 SODIMM (Kit of 2) 1.35V

  • 16GB (8GBx2) Kit 64-Bit DDR3L-1866
  • 8 independent internal bank
  • Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5
  • Factory Tested

View full description

QuickFind: 707765

Mfr part code: HX318LS11IBK2/16

{{#lists}}
  • {{ title }}
  • {{/lists}}

    HyperX Impact Black 16GB 1866MHz DDR3L CL11 SODIMM (Kit of 2) 1.35V Product Description

    HyperX HX318LS11IBK2/16 is a kit of two 1G x 64-bit (8GB) DDR3L-1866 CL11 SDRAM (Synchronous DRAM) 2Rx8, low voltage, memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 16GB. Each module kit has been  tested to run at DDR3L-1866 at a ow latency timing of 11-11-11 at 1.35V or 1.5V. Additional iming parameters are shown in the PnP Timing Parameters section below.

    JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
    VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
    933MHz fCK for 1866Mb/sec/pin
    8 independent internal bank
    Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5
    Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
    8-bit pre-fetch
    Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
    Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
    On Die Termination using ODT pin
    Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
    Asynchronous Reset
    PCB : Height 1.180" (30.00mm), double sided components

    HyperX Impact Black 16GB 1866MHz DDR3L CL11 SODIMM (Kit of 2) 1.35V Product Reviews

    Technical Specifications

    Memory

    Module Height (inch) 1.18
    Speed 1866 MHz ( PC3L-14900 )
    Latency Timings CL11 ( 11-11-11 )
    Data Integrity Check Non-ECC
    Features Dual rank, eight banks, On-Die Termination (ODT), Low Voltage, Black PCB , unbuffered
    Module Configuration 1024 x 64
    Chips Organization 512 x 8
    Voltage 1.35 / 1.5 V
    RAM Performance SPD - 1333 MHz - 1.35 / 1.5 V - CL8 - 8-8-8 ¦ SPD - 1600 MHz - 1.35 / 1.5 V - CL10 - 10-10-10 ¦ SPD - 1866 MHz - 1.35 / 1.5 V - CL11 - 11-11-11
    Type DRAM
    Technology DDR3L SDRAM
    Form Factor SO-DIMM 204-pin

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    General

    Capacity 16 GB : 2 x 8 GB
    Upgrade Type Generic

    Customer Questions

    HyperX Impact Black 16GB 1866MHz DDR3L CL11 SODIMM (Kit of 2) 1.35V Ask an owner

    HyperX Impact Black 16GB 1866MHz DDR3L CL11 SODIMM (Kit of 2) 1.35V Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.