£404.99 inc. vat£492.99save £88.00
£337.49 ex. vat£410.82save £73.33
Click & Collect Unavailable
per month. Learn more Finance from
per month. Learn more
XYZ Printing da Vinci 2.0A Duo 3D Printer
- Print in multiple colours with the Dual Head Extruder
- Large build Platform
- Enclosed 3D Printing,
Mfr part code: 3F20AXEU00D
Customers Who Viewed This Product Also Viewed
XYZ Printing da Vinci 2.0A Duo 3D Printer Product Description
Multi-colour 3D printing has never been so easy and affordable with the da Vinci 2.0 duo. Unlike many other 3D printers the da Vinci 2.0 has two extruders. This means that the user can create multi-coloured objects using any two of the 13 different colour cartridges that are available for this machine. The cartridges are easy to install and change, with the vibrant colours ensuring great results time after time.
Fast and affordable 3D printing
3D printing is no longer reserved for science fiction movies nor is it prohibitively expensive. XYZ has now brought it into the mainstream and designers, businesses and schools, as well as home users, can now enjoy the novelty and creativity possible with affordable 3D printing.
Although it is becoming more commonplace there is still little to match the experience of creating your first 3D 'print'. And the da Vinci 2.0 makes it easy to get started. More or less ready to go straight out of the box the set up time is drastically reduced as the printer will automatically calibrate itself. Calibration used to be the bane of 3D printers but the da Vinci 2 takes care of everything. Then you just need to install the cartridges, this may take a few minutes at first but, once done, you can be designing and printing in no time.
Printing your first model
Once the printer is set up it is simplicity itself to begin printing your first object. You can select a pre-designed object from the start menu via the LED panel on the front of the printer. Or, alternatively, connect your PC and choose a model from the extensive selection provided in XYZ's cloud library.
Of course you are certainly not limited to existing models and can design and clone almost unlimited objects. Great news for designers, model makers and hobbyists who will all enjoy planning, designing and then printing their creations.
The maximum volume, or size, of the object that can be printed is 5.9" in height with a width and depth of 7.8". This large size gives the user plenty of scope in the type and scale of objects they can print.
The da Vinci 2.0 uses FFF (Fused Filament Fabrication) to print its models. FFF delivers fast results compared to other technologies. The filament is the ABS plastic material used to print an object (as ink would be in an inkjet printer) and is pumped through a tube to the print nozzle, or extruder, which then ejects the filament onto the printing platform.
The model is built by successive layers of plastic being bonded to the layer beneath it. In this way the object is gradually built up with the process taking around an hour for simple shapes though more complex designs will take longer depending on the resolution used.
The da Vinci 2.0 has four resolution settings ranging from 100 microns (the finest) to 400 microns (the lowest resolution but the fastest to print). The resolution can be easily changed by the user when required depending on the object being printed.
- Fully enclosed and safe printing area
- Two colour printing
- Easy slot in colour cartridges
- Hundreds of 3D designs can be downloaded
- Connect to PC via USB
FFF (Fused Filament Fabrication)
Maximum Build Volume (HxWxD)
5.9H x 7.8W x 7.8D inch (15x20x20cm)
Fine 0.1 mm (100 microns)
Standard 0.2 mm (200 microns)
Speed 0.3 mm (300 microns)
Ultra-fast 0.4 mm (400 microns)
2.6" FSTN LCM
.stl , XYZ Format
Windows XP ( .Net 4.0 required) and Windows 7 above (for PC)
Mac OSX 10.8 above-bit (for Mac)
Note: Standard VGA driver on operating system, or a graphics card doesn't support OpenGL 2.1, may cause unknown error in XYZware.
Hardware Requirements (for PC/Mac)
X86 32/64-bit compatible PCs with 4GB+ DRAM (for PC)
X86 64-bit compatible Macs with 4GB+ DRAM (for Mac)
Software / System Requirements
|System Requirements Details||RAM 2 GB|
|OS Required||Microsoft Windows XP, Microsoft Windows 7, Apple MacOS X 10.7 Lion, Apple MacOS X 10.8, Apple MacOS X 10.9||
|Resolution||0.1 - 0.4 mm|
|Min Layer Thickness||0.1 mm|
|Input File Formats Supported||STL, 3w|
|Printer Features||Dual extruder|
|Built-in Devices||2.6 inch LCD display||
|Build Materials Supported||Polylactide (PLA), acrylonitrile butadiene styrene (ABS)|
|Max Build Size||200 x 200 x 150 mm|
|Filament Diameter||1.75 mm||
Dimensions & Weight
Dimensions & Weight (Shipping)
|Width (Shipping)||56 cm|
|Depth (Shipping)||59 cm|
|Height (Shipping)||70 cm|
|Weight (Shipping)||27.5 kg||
|Printer Type||3D printer|
|Technology||Fused Filament Fabrication (FFF)|
XYZ Printing da Vinci 2.0A Duo 3D Printer Ask an owner
XYZ Printing da Vinci 2.0A Duo 3D Printer Product Discussion
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.