£100.72 inc. vat

£83.93 ex. vat

In Stock

Order within for delivery on Monday, 12th December

Click & Collect Available

Paypal Credit Finance from £8.40
per month. Learn more
PayPal Credit - Buy now spread the cost

HyperX FURY Low Voltage 16GB 2x8GB DDR3L 1600MHz DIMM Desktop Memory

  • 16GB memory Kit
  • DDR3L 1600MHz

View full description

QuickFind: 722614

Mfr part code: HX316LC10FBK2/16

{{#lists}}
  • {{ title }}
  • {{/lists}}

    HyperX FURY Low Voltage 16GB 2x8GB DDR3L 1600MHz DIMM Desktop Memory Product Description

    HyperX FURY Low Voltage 16GB Kit DDR3L 1600MHz Memory (2x8GB)

    HyperX HX316LC10FB/4 is a 512M x 64-bit (4GB) DDR3L-1600 CL10 SDRAM (Synchronous DRAM) 1Rx8, low voltage, memory module, based on eight 512M x 8-bit DDR3 FBGA components. Each module kit supports Intel® Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR3L-1600 at a low latency timing of 10-10-10 at 1.35V.
    Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications areas follows:


    PnP JEDEC TIMING PARAMETERS:
    JEDEC/PnP:
    DDR3L-1600 CL10-10-10 @1.35V/1.5V 
    DDR3L-1333 CL9-9-9 @1.35V/1.5V   DDR3L-1066 CL7-7-7 @1.35V/1.5V
    XMP Profile #1: DDR3L-1600 CL10-10-10 @1.35V

    FEATURES

    JEDEC standard 1.35V and 1.5V Power Supply
    VDDQ = 1.35V and 1.5V
    800MHz fCK for 1600Mb/sec/pin
    independent internal bank
    Programmable CAS Latency: 11, 10, 9, 8, 7, 6
    Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
    8-bit pre-fetch
    Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not  allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe
    Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
    On Die Termination using ODT pin
    Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C
    Asynchronous Reset
    Height 1.291" (32.80mm) w/heatsink, single sided component


    SPECIFICATIONS

    CL(IDD)  10 cycles
    Row Cycle Time (tRCmin) 28.125ns (min.)
    Refresh to Active/Refresh Command Time (tRFCmin)  260ns (min.)
    Row Active Time (tRASmin)  37.5ns (min.)
    Maximum Operating Power TBD W*
    UL Rating  94 V - 0
    Operating Temperature  0oC to +85oC
    Storage Temperature  -55oC to +100oC

    *Power will vary depending on the SDRAM used.

    HyperX FURY Low Voltage 16GB 2x8GB DDR3L 1600MHz DIMM Desktop Memory Product Reviews

    Technical Specifications

    General

    Capacity 16 GB : 2 x 8 GB
    Upgrade Type Generic

    Memory

    Type DRAM
    Technology DDR3L SDRAM
    Form Factor DIMM 240-pin
    Module Height (inch) 1.29
    Speed 1600 MHz ( PC3L-12800 )
    Latency Timings CL10 ( 10-10-10-30 )
    Data Integrity Check Non-ECC
    Features Dual rank, black heatsink, eight banks, On-Die Termination (ODT), dual channel, Low Voltage, Black PCB, FURY asymmetric heatspreader, Intel Extreme Memory Profiles (XMP 2.0) , unbuffered
    Module Configuration 1024 x 64
    Chips Organization 512 x 8
    Voltage 1.35 / 1.5 V
    RAM Performance SPD - 1066 MHz - 1.35 / 1.5 V - CL7 - 7-7-7 ¦ SPD - 1333 MHz - 1.35 / 1.5 V - CL9 - 9-9-9 ¦ SPD - 1600 MHz - 1.35 / 1.5 V - CL10 - 10-10-10 ¦ Intel Extreme Memory Profiles (XMP 2.0) - 1600 MHz - 1.35 / 1.5 V - CL10 - 10-10-10

    Miscellaneous

    Colour Category Black

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    Customer Questions

    HyperX FURY Low Voltage 16GB 2x8GB DDR3L 1600MHz DIMM Desktop Memory Ask an owner

    HyperX FURY Low Voltage 16GB 2x8GB DDR3L 1600MHz DIMM Desktop Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.