£43.49 inc. vat

£36.24 ex. vat

In Stock

Order within for delivery on Monday, 3rd October

Click & Collect Available

HyperX Savage 8GB Kit (2x4GB) DDR4 2800MHz Intel XMP CL14 DIMM Memory

  • 8GB Memory Kit (2x4GB)
  • DDR4 2800MHz
  • 1.35V

View full description

QuickFind: 738372

Mfr part code: HX428C14SB2K2/8

{{#lists}}
  • {{ title }}
  • {{/lists}}

    HyperX Savage 8GB Kit (2x4GB) DDR4 2800MHz Intel XMP CL14 DIMM Memory Product Description

    HyperX Savage  8GB Kit (2x4GB)- DDR4 2800MHz Intel XMP CL14 DIMM Memory 

    HyperX HX428C14SB2K2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2800 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2800 at a low latency timing of 14-16-16 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:



    XMP TIMING PARAMETERS
    JEDEC: DDR4-2133 CL15-15-15 @1.2V
    XMP Profile #1: DDR4-2800 CL14-16-16 @1.35V
    XMP Profile #2: DDR4-2666 CL14-15-15 @1.35V


    SPECIFICATIONS
    CL(IDD)  15 cycles
    Row Cycle Time (tRCmin)  46.5ns (min.)
    Refresh to Active/Refresh Command Time (tRFCmin)  260ns (min.)
    Row Active Time (tRASmin)  33ns (min.)
    Maximum Operating Power  TBD W*
    UL Rating  94 V - 0
    Operating Temperature  0oC to +85oC
    Storage Temperature  -55oC to +100oC

    Power will vary depending on the SDRAM used.

    FEATURES
    Power Supply: VDD = 1.2V Typical
    VDDQ = 1.2V Typical
    VPP - 2.5V Typical
    VDDSPD = 2.25V to 3.6V
    On-Die termination (ODT)
    16 internal banks; 4 groups of 4 banks each
    Bi-Directional Differential Data Strobe
    8 bit pre-fetch
    Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
    Height 1.36" (34.57mm)

    HyperX Savage 8GB Kit (2x4GB) DDR4 2800MHz Intel XMP CL14 DIMM Memory Product Reviews

    Technical Specifications

    General

    Capacity 8 GB : 2 x 4 GB
    Upgrade Type Generic

    Memory

    Type DRAM
    Technology DDR4 SDRAM
    Form Factor DIMM 288-pin
    Module Height (inch) 1.36
    Speed 2800 MHz ( PC4-22400 )
    Latency Timings CL14 ( 14-16-16 )
    Data Integrity Check Non-ECC
    Features Single rank, black heatsink, aluminium heat spreader, On-Die Termination (ODT), Intel Extreme Memory Profiles (XMP), Black PCB, low profile heat spreader, sixteen banks, asymmetrical heatspreader , unbuffered
    Module Configuration 512 x 64
    Chips Organization 512 x 8
    Voltage 1.35 V
    Lead Plating Gold
    RAM Performance SPD - 2133 MHz - 1.2 V - CL15 - 15-15-15 ¦ Intel Extreme Memory Profiles (XMP) - 2666 MHz - 1.35 V - CL14 - 14-15-15 ¦ Intel Extreme Memory Profiles (XMP) - 2800 MHz - 1.35 V - CL14 - 14-16-16

    Miscellaneous

    Colour Category Black

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    Customer Questions

    HyperX Savage 8GB Kit (2x4GB) DDR4 2800MHz Intel XMP CL14 DIMM Memory Ask an owner

    HyperX Savage 8GB Kit (2x4GB) DDR4 2800MHz Intel XMP CL14 DIMM Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.