£67.29 inc. vat

£56.07 ex. vat

In Stock

Order within for delivery on Thursday, 29th June

Click & Collect Unavailable

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory

  • 8GB Memory Stick
  • Form Factor DIMM
  • DDR4-2400

View full description

QuickFind: 743584

Mfr part code: HX424C15FB2/8

{{#lists}}
  • {{ title }}
  • {{/lists}}

    HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Product Description

    HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM  Black Memory

    DESCRIPTION
    HyperX HX424C15FB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

    Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.

    JEDEC/XMP TIMING PARAMETERS
    JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V                        DDR4-2133 CL14-14-14 @1.2V
    XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V

    SPECIFICATIONS
    CL(IDD) 15 cycles
    Row Cycle Time (tRCmin) 46.75ns(min.)
    Refresh to Active/Refresh Command Time (tRFCmin)  350ns(min.)
    Row Active Time (tRASmin) 29.125ns(min.)
    Maximum Operating Power TBD W*
    UL Rating 94 V - 0
    Operating Temperature  0oC to +85oC
    Storage Temperature -55oC to +100oC

    *Power will vary depending on the SDRAM used.

    FEATURES
    Power Supply: VDD = 1.2V Typical
    VDDQ = 1.2V Typical
    VPP - 2.5V Typical
    VDDSPD = 2.2V to 3.6V
    Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    Low-power auto self refresh (LPASR)
    Data bus inversion (DBI) for data bus
    On-die VREFDQ generation and calibration
    Single-rank
    On-board I2 serial presence-detect (SPD) EEPROM
    16 internal banks; 4 groups of 4 banks each
    Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    Selectable BC4 or BL8 on-the-fly (OTF)
    Fly-by topology
    Terminated control command and address bus
    Height 1.340" (34.04mm), w/o heatsink

    Technical Specifications

    Memory

    Speed 2400 MHz (PC4-19200)
    Latency Timings CL15 (15-15-15)
    Features Single rank, black heatsink, On-Die Termination (ODT), Serial Presence Detect (SPD), Black PCB, low profile heatspreader, FURY asymmetric heatspreader, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0), unbuffered
    Type DRAM
    Technology DDR4 SDRAM
    Form Factor DIMM 288-pin
    Module Height (inch) 1.34
    Data Integrity Check Non-ECC
    Module Configuration 1024 x 64
    Chips Organization 1024 x 8
    Voltage 1.2 V
    Lead Plating Gold
    RAM Performance SPD - 2133 MHz - 1.2 V - CL14 - 14-14-14 ¦ SPD - 2400 MHz - 1.2 V - CL15 - 15-15-15 ¦ Intel Extreme Memory Profiles (XMP 2.0) - 2400 MHz - 1.2 V - CL15 - 15-15-15

    Manufacturer Warranty

    Service & Support Limited lifetime warranty (Russia - 10 years)

    General

    Capacity 8 GB
    Upgrade Type Generic

    Miscellaneous

    Colour Category Black

    HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Ask an owner

    HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.