D-Link DNR-2020-04P JustConnect Standalone DVR

  • Standalone DVR
  • 16 channels
  • Frame Rate 480 fps
  • Voltage 100 - 240 V

View full description

QuickFind: 762600

Mfr part code: DNR-2020-04P

{{#lists}}
  • {{ title }}
  • {{/lists}}

    D-Link DNR-2020-04P JustConnect Standalone DVR Product Description

    The DNR-2020-04P JustConnect 16-Channel PoE Network Video Recorder is an all-in-one network video recorder (NVR) that can record video from up to 16 network cameras to its dual HDD storage. With the integrated HDMI/VGA display output and USB port,users can view,control and configure the DNR-2020-04P without the need to turn on their PC.

    Technical Specifications

    General

    Standards

    • IEEE 802.3u/x/z
    • IEEE 802.3af        
    • SATA II/III
    • Auto MDI/MDI-X

    HDD2

    • Format Disk
    • Up to 16 TB HDD
    • EXT3 file system
    • RAID 0, 1, JBOD4

    Two Reset Modes

    • Reset firmware GUI button
    • HW reset button (hold for 10 seconds)

    Reset Button

    • Reset to factory default  

    Flash ROM

    • 128 MB       

    RAM

    • 1024 MB DDR3    

    Network Interface

    • Gigabit Ethernet port (10/100/1000 Mbps) 

    I/O Ports

    • 1 x 10/100/1000 BaseT RJ-45 port
    • 4 x 10/100 BaseT PoE port (802.3af)
    • HDMI (supports 720p and 1080p resolution with 16:9 display ratio)
    • D-sub for VGA output
    • 1 x USB 3.0 port3
    • 1 x USB 2.0 port3
    • 3.5 mm audio input x 1, output x 1
    • 4 x DI, 1 x DO

    Cooling

    • 1 x Smart Fan      

     

    Software Features

    Supported Cameras

    • Please visit www.dlink.com for a list of supported cameras1
    •  Supports auto-discovery and megapixel resolution

    System Requirements for Web Interface

    • Browser: Internet Explorer, Firefox, or Safari        

    Recording Performance

    • Max recording bitrate: 80 Mbit/s
    • Primary video profile:
      • H.264 at 1080p at 480 fps
      • Secondary video profile:
        • H.264 at VGA at 240 fps

    Camera Search

    • UPnP
    • ONVIF

    Audio and Video Recording

    • Synchronised audio & video recording        

    Compression Format

    • H.264, MPEG-4, M-JPEG

    Audio Compression Format

    • G.711, G.726       

    Video Setting

    • Resolution
    • Quality
    • Bitrate
    • Frame rate
    • Enable audio
    • Video profile selection

    Recording Mode

    • Record by schedule, manual, always, and event-based recording      
    • Motion-triggered recording

    Alarm Recording

    • Pre-alarm: 60 seconds per channel
    • Post-alarm: 300 seconds per channel

    Remote Live View

    • Supported via browser and Multi NVR Viewer (DCS-260) software

    Remote Live View Control

    • Live view
    • Preset/Go to Preset
    • Patrol/Auto Patrol
    • Focus
    • PTZ control
    • Snapshot
    • Full screen
    • Auto scan
    • Digital zoom (Zoom in & Zoom out)
    • Manual Record
    • Audio Enable
    • Adjust audio volume
    • Video layout
    • e-map

    Remote Playback Control

    • Normal
    • Fast forward/rewind
    • Step forward/rewind

    Remote Playback

    • Supported via browser and Remote Playback application
    • Playback system with timeline GUI, search by event, area, cameras, date, and time
    • Browser or Remote Playback support 16-channel simultaneous playback
    • Digital zoom

    Overwrite Recording

    • Auto recycling when disk storage is full       

    File Export

    • Local: Export videos to AVI / MP4 format
    • Remote: Export videos to AVI or ASF file
    • Export images to JPG file

    Digital Watermark Tool

    • Prevents recorded video files/snapshots from being tampered with    
    • Acts as a tool for verification

    User Account

    • Additional accounts can be created to allow users system access and specify authorization for camera channels, PTZ, etc.

    DDNS

    • D-Link DDNS and DynDns server support
    • Manual DDNS

    System Time

    • D-Link NTP
    • Input time
    • Sync with computer
    • Daylight saving time

    Auto Backup

    • Backup recorded data to USB/SAMBA/FTP via a schedule

    Remote Backup

    • Remote backup software can backup raw data to redundant storage

    System Status

    • Camera status
    • HDD status
    • System status
    • Network Service

    Protocols

    • IPV4, ARP, TCP, UDP, ICMP
    • DHCP Server/Client
    • NTP Client
    • DNS Client
    • DDNS Client
    • SMTP Client
    • FTP Client
    • HTTP Server
    • RTP
    • RTCP
    • RTSP
    • IP filtering
    • UPnP
    • CoS
    • QoS/DSCP
    • HTTPS
    • Samba
    • Bonjour
    • SNMP v1/v2c/v3
    • PPPoE
    • DDP

    User Interface

    • HTTP Web browser
    • NVR Search Utility
    • Remote Playback/Backup
    • Verification tool
    • Mobile app (JustConnect+ Mobile App available on iTunes and Google Play)
    • GUI via HDMI/VGA

    Package Contents

    • JustConnect 16-Channel PoE Network Video Recorder
    • Power Adapter
    • Ethernet Cable
    • Quick Installation Guide
    • CD-ROM with:
      • Software
      • Product Documentation

    Physical

    Weight

    • 2.1 kg (4.63 lbs)  

    Power Input

    • Input: 100 to 240 V AC, 50 to 60 Hz
    • Output: DC 48 V/1.85 A

    Power Consumption

    • Max. 90 W  

    PoE Budget

    • Per Port: Max. 15 W
    • Total: 45 W

    Temperature

    • Operating: 0 to 40 ˚C (32 to 104 ˚F)
    • Storage: -20 to 70 ˚C (-4 to 158 ˚F)

    Humidity

    • 5% to 90% non-condensing    

    Certifications

    • CE
    • FCC
    • RoHS

    Dimensions        

    • 63 x 225 x 300 mm

    Technical Specifications

    General

    Device Type NVR
    Package Content External power adapter, software
    Video Channels 16
    Image Resolution 1280x720, 1920x1080, 1024x768, 1280x1024
    Compression Format MJPEG, MPEG-4, G.711, G.726, H.264
    Cables Included Network cable - 1 pcs.
    Software Included (Y) Drivers & Utilities
    Compliant Standards FCC, RoHS

    Security DVR

    Frame Rate (Record) 480 fps
    Record Events Motion detection, scheduled, event, manual, continuous
    Networked Yes
    Features RAID 0 support, RAID 1 support, Pan/Tilt/Zoom support, motion detection

    Hard Drive

    Quantity Supported 2
    Interface Serial ATA
    Supported Max Total Capacity 16 TB

    Networking

    Network Interfaces Ethernet 10Base-T/100Base-TX/1000Base-T
    Supported Protocols DDNS, DHCP, DNS, FTP, HTTP, NTP, SMTP, TCP/IP, UDP/IP, ARP, ICMP, SNMP 1, SNMP 2c, SNMP 3, RTSP, RTP, HTTPS, UPnP, IPv4, Bonjour, RTCP, PPPoE, Samba, QOS, CoS, DSCP
    Features Power over Ethernet (PoE), ONVIF support

    Connections

    Video Input Ports RJ-45 x 4
    Video Output Ports HDMI x 1, VGA x 1
    Audio Input Ports Mini-phone 3.5 mm x 1
    Audio Output Ports Mini-phone 3.5 mm x 1
    Alarm Ports Alarm output x 1, alarm input x 4
    Network Port 10/100/1000Base-T
    Other Ports USB 2.0, USB 3.0 x 1

    Power

    Voltage 100 - 240 V
    Frequency 50/60 Hz
    Power Consumption 90 Watt

    Dimensions & Weight

    Width 30 cm
    Depth 22.5 cm
    Height 6.3 cm
    Weight 2.1 kg

    Environmental Parameters

    Min Operating Temperature 0 °C
    Max Operating Temperature 40 °C
    Humidity Range Operating 5 - 90% (non-condensing)

    D-Link DNR-2020-04P JustConnect Standalone DVR Ask an owner

    D-Link DNR-2020-04P JustConnect Standalone DVR Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.