Overview

The wireless Meida MVP has these great features:

• Listen too and watch PC based media on your TV set
• Listen to MP3 or WMA music through your TV set
• View JPEG and GIF digital pictures on your TV set
• Watch slide shows of your digital camera pictures on your TV set, while listening to your favorite digital music
• Watch MPEG or DivX®1 videos on your TV set, The wMVP works great with videos recorded with any of Hauppauge’s WinTV tuner products
• Listen to Internet radio
• Connects to wireless or wired Ethernet networks:(connects to your PC via an 802.11G wireless network, or a 10/100Mbit Ethernet network)
• See lists of your PC based music, videos or digital pictures on your TV set
• Play slideshows with music;Up to 4 wMVPs in wireless mode (or 16 wired*) can be used with one PC which therefore allows you to Watch or listen to your PC based media in several rooms in your home

wMVP is simple to install: Install the MediaMVP Server application on your PC and connect wMVP to your TV set. wMVP has a Network Setup program to allow you to choose your wireless Access Point or a wired router, hub or switch. In just a few minutes you’ll be able to play your PC based music, videos or digital pictures on your TV set!

Navigate through your PC media from your TV set, selecting MPEG or DivX® videos, individual music titles to listen to or digital pictures to watch. You can simultaneously play a picture slideshow while listening to a complete music program. Or play a music playlist (MusicMatch, Winamp and Windows Media playlists supported).

Play MPEG movies on your TV set. Create MPEG videos on your PC with Hauppauge's WinTV (optional), then play those videos on your TV set through wMVP. wMVP works with videos recorded with any WinTV! wMVP also supports most standard MPEG-1, MPEG-2 and DivX® videos.

wMVPs remote control gives you complete control over your PC based media. Pause, fast forward and rewind through videos, plus play and pause music and digital picture shows. You can adjust the audio volume from wMVPs remote control, so you won’t need to use your TV's remote control!

Connect wMVP to your home theater system! Connect wMVPs’ SCART and S/PDIF digital audio outputs to your home theater system and you'll be able to watch your digital videos and pictures on your TV set while listening to wMVP audio through your home theater speakers!

If your laptop has no A/V outputs, you can still plug it to a TV set using wMVP! wMVP can be connected directly to your PC or laptop. All you need is an Ethernet cross over cable (available at most computer shops) to directly connect wMVP with your laptop.

Technically speaking:

wMVP is a Linux based digital media receiver. Inside wMVP is a high performance IBM PowerPC processor and a hardware MPEG audio/video decoder for MPEG-1/-2 videos and MP3 music.

wMVP receives digital media from the PC via the LAN, decodes the media and outputs audio/video to the TV set through the SCART connector. Digital pictures are software decoded by wMVP’s processor.

The MediaMVP Server application creates menus on the PC, which are transmitted over the LAN to the wMVP where it provides the on-TV-screen display. wMVP receives commands from the supplied remote control, and sends these commands to the PC server, where the remote control commands are executed.

Included in this package;

• wMVP with SCART & S/PDIF output connectors
• an 802.11G antenna and an RJ45 jack for wired Ethernet networks
• Stand and 1.5 meter Ethernet cable
• 1.5 meter SCART cable
• Wall mounted power supply - 6v
• Remote control with batteries
• wMVP Installation CD-ROM & Quick Installation Guide
• .