- Components
- Memory - PC
- DDR2 800MHz
- Product Details
OCZ Technology
OCZ 2GB (2x1GB) DDR2 800MHz/PC2-6400 Platinum XTC Memory Kit CL4 2.1V LIFETIME WARRANTY
- quickfind code: 116755
- manufacturer #: OCZ2P800R22GK
91 reviewsOverview
Product Description
The Platinum Revision 2 has been re-engineered to turn out heart-pounding 4-4-4 timings with flawless performance and stability and offer lower latencies than standard 800MHz DDR2 memory. It utilizes the latest OCZ heatspreader design. XTC (Xtreme Thermal Convection) Heatspreaders allow increased ventilation and heat dissipation due to an innovative honeycomb design providing more direct access to the actual memory ICs.The Platinum Revision 2 is built with leading edge technology designed and qualified with special selection of premium components to maximize performance in even the most demanding computing environments.
With its ultra-fast performance, high quality and reliability, the Platinum Revision 2 edition is a perfect memory upgrade for the latest CPU arrivals.
Specification
Product Specifications
General | |
|---|---|
| Storage Capacity | 2 GB ( 2 x 1 GB ) |
| Upgrade Type | Generic |
Memory | |
| Type | DRAM |
| Technology | DDR II SDRAM |
| Form Factor | DIMM 240-pin |
| Memory Speed | 800 MHz ( PC2-6400 ) |
| Latency Timings | CL4 ( 4-4-4-15 ) |
| RAM Features | Platinum mirrored XTC heatspreader , unbuffered |
| Supply Voltage | 2.1 V |
Expansion / Connectivity | |
| Compatible Slots | 2 x memory - DIMM 240-pin |
Manufacturer Warranty | |
| Service & Support | Limited lifetime warranty |
Product Reviews
Ebuyer.com customer reviews give you the chance to give your opinion on the latest technology products. See what customers had to say about this product below. To view more reviews or write your own review, use either of the buttons below.
Excellent Kit
operating system:
Windows XPThese went in and worked straight away, needed to tweek the BIOS voltage as my MB was set to 1.9v by default to put both chips in you need to run ideally at 2.1V.
Look the part as well
Very fast memory and overclocks well.
operating system:
Windows XPMy setup includes motherboard P5N32-E 680i chipset with bios version 0903 and CPU Core 2 Duo 6600E SL9S8. I tested for 3 hours showing no errors with memtestx86 ver 3.3 for the following settings 5-5-5-15 @ 1.85v DDR800 / 4-4-4-12 @ 1.95v DDR800 / 4-4-4-12 @ 2.05v DDR900 / 4-4-4-15 @ 2.1v DDR1000. The board temp increased by 2°C from lower to top specs on stock cooling
Awesome Memory!!!
operating system:
Windows VistaBought 2 kits of these (4 gigs), fitted on my M2N32-SLI Deluxe (AMD Athlon 64 X2 5200+ Dual Core) , got into the BIOS and changed the voltage for 2.1 and 4-4-4-12 (some reviews are saying that changing the CPU multiplayer x8 takes the processor at optimal speed) but It didn’t work for me, besides that…. What can I say? Just brilliant!!
Having SLI (got 2x7600GT) the games and other applications runs sweet and extremely fast! Tell you more I had before 2 gig Kingston 667PC2-5300 and my Windows Experience Index was 4.3 and now it jumped to 5.6!
Get at least a pair of them!
Be Careful with AM2 mobo
operating system:
Windows XPThese are great memory sticks, many people get problems when they used them with a AM2 mobo, I can say most of them come from the memory slots voltage. These sticks require a 2.1v voltage to run at 800MHz as stated. Most AM2 motherboards set defaoult memory voltage at 1.8v, which causes a lot of 'black screen' cases, make sure your mobo surport 2.1v and they will run like a charm! I run it on a Abit NF-M2 nView with a 3800x2 very good.
overclockers dream
Running this with Conroe on an Intel D975XBX overclocked to 3.0gz. that is only 667 speed for the memory, but it is 100% stable and fast enough for me at this time.
Be sure to set your voltage at the specified 2.1 for these modules. Running at 4-4-4-12 at 667 Mhz, could easily go faster
Top notch RAM
operating system:
Windows XPBeen using this RAM a while now running at 960 mhz @2.2v with no problems at all. Highly recommended.
Very Overclockable DDR :-)
operating system:
Windows Vistabooted on an ASUS 680i at 1.88V. This board has numerous compatability issues but this memory still ran 800MHz. Runs fine at 800MHz and 5-5-5-15 BUT .. if you want to turn up the juice on these modules and if you own a 680i, be sure to change the default settings in the Bios. Raise the volts to 2.1 and run it at 900mhz (889 actually) 4-4-4-12 and watch it fly!
Dead PC! - No POST!
Note for buyers - this RAM requires 2.1v but is not always automatically recognised as such in the BIOS.
I have a Gigabyte GA-P35C-DS3R rev2.0 Motherboard with a Intel E6750 processor. My board would not POST with this RAM, it just hung there apparently dead, removing the OCZ RAM resulted in BEEP codes. To get the rig working I had to insert a stick of Samsung DDR2 ram and set the ram voltage in the BIOS to +0.2v (presumable 2.1v). After re-inserting the OCZ all seemed ok.
I will be updating the BIOS to see if it cures this problem as it is a bit of a pain going through the above procedure each time the BIOS is reset.
Hope this helps someone :-)
Remarkable Ram !!!
operating system:
Windows XPThis RAM and Gigabyte's 965 chipset boards work very well together. My GA-965P-DS3 posted on the first try with this stuff.
Works great at specified voltage and timing. Did a 8 hour burn-in at 2.3v for 8 hours with no errors using MemTest86
What else can I say, Its ocz ram. Its all I use and doubt I will stray from it.
unlucky i think
operating system:
Windows XPhad this memory installed already in my dual core build in a p5ne sli mobo ran like a dream so took the plunge ordered another set and OMG blue screen hell so have sent back to ebuy to check it so note for all it may say tested beforehand but trust me some dodgy ones do get thru:( if it works 5stars and if it dont lol u will see
Product Discussion
Join in with the Ebuyer product discussions today to ask questions, exchange stories and share opinions with other Ebuyer customers who have bought this product.
Bookmark / Share
