Blade Servers

- For server advice email SOLUTIONS@EBUYER.COM
- Full AC redundancy
- Choice of a single-phase
- Provides a wizard-based initial setup process for
easy configuration.

- For server advice email SOLUTIONS@EBUYER.COM
- Full AC redundancy
- Choice of a single-phase
- Provides a wizard-based initial setup process for
easy configuration.

- For server advice email SOLUTIONS@EBUYER.COM
- Full AC redundancy
- Choice of a single-phase
- Provides a wizard-based initial setup process for
easy configuration.

- For server advice email SOLUTIONS@EBUYER.COM
- Opteron 6174 / 2.2 GHz
- RAM 8 GB
- Hot-Swap 2.5 SAS

- 16 x 10Gb downlinks to server NICs
- 2 x 10Gb cross connects for redundancy and
stacking
- 1 x 10Gb copper uplinks CX-4 for stacking to
Virtual Connect Modules or uplinking to data center
switches
- 8 x 10Gb SR, LR, or LRM fiber and copper SFP+
uplinks
- Supports up to 4 FlexNICs per 10Gb server
connections
- Each FlexNIC is recognized by the server as a
PCI-e physical function device with customizable
speeds from 100Mb to 10Gb
- Line Rate, full-duplex 240Gbps bridging fabric
- Less than 1ms latency
- MTU up to 9216 Bytes - Jumbo Frames
- Configurable up to 8192 MAC addresses and 1000
IGMP groups
- VLAN Tagging, Pass-Thru and Link Aggregation
supported on all uplinks
- Virtual Connect Manager is included with every
module
- HTTP and a secure, scriptable CLI interface is
ready out of the box. Easy setup and management via
the Onboard Administrator interface
- SNMP v.1 and v.2, provide ease of administration
and maintenance
- Role-based security for network and server
administration with LDAP compatibility
- Port Mirroring on any uplink provides network
troubleshooting support with Network Analyzers
- IGMP Snooping optimizes network traffic and
reduces bandwidth for multicast applications such
as streaming applications
- Recognizes and directs Server-Side VLAN tags
- Appears as a Pass-Thru device to the LAN Manager
- Create up to 4 individual FlexNICs with their own
dedicated, customized bandwidth per 10Gb downlink
connection
- Set FlexNIC speeds from 100Mb to 10Gb per
connection
- Allows setup of server connectivity prior to
server installation for easy deployment
- Ability to move, add, or change server network
connections on the fly
- Once defined, LAN and SAN administrators don't
have to be involved in server changes
- Stack multiple Virtual Connect Ethernet modules
together in an enclosure to allow any server
Ethernet port to connect to any uplink
- The Fiber Channel Virtual Connect Module provides
a complete LAN and SAN Virtual Connect solution
- Supports all 1Gb Server NICs including LOM and
Mezzanine card options and the latest 10Gb KR NICs

- 4Gb per port throughput to SAN fabric
- Sixteen Fiber Optic ports with pre-install SFPs
delivered in a single IO bay form factor
- 1:1 non-blocking architecture
- Wire speed
- No need for SAN management inside the enclosure
- Basic power, temperature and status monitored by
the enclosure Onboard Administrator

- For server advice email SOLUTIONS@EBUYER.COM
- Switch
- 8 Ports
- Plug-in module

- For server advice email SOLUTIONS@EBUYER.COM
- Opteron 6136 / 2.4 GHz
- RAM 8 GB
- Hot-Swap 2.5 SAS

- For server advice email SOLUTIONS@EBUYER.COM
- Blade Server
- E5-2670/2.60GHz
- 64GB

- For server advice email
SOLUTIONS@EBUYER.COM
- Xeon X5675 / 3.06 GHz
- RAM 12 GB
- Hot-Swap 2.5 SAS

- Enhanced processor performance and capabilities
- Improved memory capacity, performance, and power
- The excellent HP iLO management engine
- Advanced I/O capabilities

- For server advice email SOLUTIONS@EBUYER.COM
- Xeon X5670 / 2.93 GHz
- RAM 12 GB
- Hot-Swap 2.5 SAS

- For server advice email SOLUTIONS@EBUYER.COM
- Xeon X5650 / 2.66 GHz
- RAM 6 GB
- No HDD