HPE ProLiant DL385 Gen10 - P26898-B21 - Rack-mountable 2U - Server AMD EPYC 2.8 GHz - 32GB

QuickFind: 1043061 Mfr part code: P26898-B21
  • 12Gb/s SAS Controller
  • 2 Processor Support
  • Gigabit Ethernet
  • 8 x SFF Bay(s)
  • Hot Swappable Bays

Product Description

HPE ProLiant DL385 Gen10 - P26898-B21 - Rack-mountable 2U - Server AMD EPYC 2.8 GHz - 32GB

Do you need a platform purpose-built to address your virtualized and memory-centric workloads? Try something EPYC™. Hewlett Packard Enterprise is extending the worlds' most secure industry standard servers1 to include the HPE ProLiant DL385 Gen10 Server, utilizing the new AMD EPYC 7000 Series processors. This platform has been designed with the security you need and the flexibility you require to accommodate the most demanding enterprise workloads. With up to 64 cores, up to 32 DIMMs, or 4 TB memory capacity and support for up to 24 NVMe drives, the HPE ProLiant DL385 Gen10 Server delivers a low cost virtual machine (VM) with unprecedented security.

What's new
- Delivering security with HPE Silicon Root of Trust and AMD EPYC Secure Processor.
- Providing up to 32 cores and 2 TB of memory per processor.
- Modular chassis with drive flexibility.
- Financing options through HPE Financial Services.

Features

Security Innovations
- HPE ProLiant DL385 Gen10 Server has security protection built in across the server life cycle starting with Silicon Root of Trust. Only Hewlett Packard Enterprise offers industry standard servers with major firmware anchored directly into the silicon.
- Millions of lines of firmware code run before server operating system boots. What's more, with Runtime Firmware Validation, enabled by HPE iLO Advanced Premium Security Edition, the server firmware is checked every 24 hours verifying validity and credibility of essential system firmware.
- Secure Recovery allows server firmware to roll back to the last known good state or factory settings after detection of compromised code.
- The AMD EPYC processor provides several security related features, including AMD secure processor, secure memory encryption (SME), and secure encrypted virtualization (SEV). These features are used to help enable key security functionality including Secure Root-of-Trust, Secure Run, and Secure Move.

Flexible Design
- HPE ProLiant DL385 Gen10 Server has an adaptable chassis, including the modular drive bays that can be configured with up to 30 SFF, up to 19 LFF or up to 24 NVMe drive options along with support for up to 3 double wide GPU options.
- HPE Smart Array S100i Software RAID ships standard for embedded m.2 boot, and the redesigned HPE Smart Array Essential and Performance RAID Controllers for performance or additional features including the ability to operate in both SAS and HBA mode.
- Along with an embedded 4x1GbE, you have a choice of HPE FlexibleLOM or PCIe standup adapters which offer a choice of networking bandwidth (1GbE to 4x10GbE) and fabric so you can adapt and grow to changing business needs.
- This server supports a wide range of operating systems making it suitable for most environments.

World-class Performance
- HPE ProLiant DL385 Gen10 Server supports industry standard technology leveraging the AMD EPYC 7000 Series Processor with up to 32 cores, 12 Gb SAS and 4.0 TB of HPE DDR4 SmartMemory.
- Supports up to three double wide or five single wide graphic processing units (GPUs) for workload acceleration.

Proven Industry Leading Services and Ease of Deployment
- HPE ProLiant DL385 Gen10 Server comes with a complete set of HPE Pointnext services, delivering confidence, reducing risk and helping customers realize agility and stability.
- Services from HPE Pointnext simplify all stages of the IT journey. Advisory and Transformation Services professionals understand customer challenges and design an optimal solution. Professional Services enables rapid deployment of solutions and Operational Services provides ongoing support.
- Services provided under Operational Services include: HPE Flexible Capacity, HPE Datacenter Care, HPE Infrastructure Automation, HPE Campus Care, HPE Proactive Services and multi-vendor coverage.
- HPE Financial Services helps you transform to a digital business with financing option and trade-in opportunities that align to your business goals.

Technical Specification

HPE ProLiant DL385 Gen10 - P26898-B21 - Rack-mountable 2U - Server AMD EPYC 2.8 GHz - 32GB

Processor / Chipset

CPU AMD EPYC 7282
Clock Speed 2.8 GHz
Max Turbo Speed 3.2 GHz
Number of Cores 16-core
CPU Qty 1
Max CPU Qty 2
CPU Upgradability Upgradable

General

Type Server
Product Form Factor Rack-mountable - 2U
Built-in Devices Led panel, battery
Server Scalability 2-way
Front Accessible Bays Qty 1
Hot-Swap Bays Qty 8
Localisation Region: Worldwide

Cache Memory

Installed Size L3 Cache - 64 MB
Cache Per Processor 64 MB

RAM

Installed Size 32 GB / 1 TB (max)
Technology DDR4 SDRAM
Rated Memory Speed 2933 MHz
Form Factor DIMM 288-pin
Slots 32 (Total) / 31 (empty)
Features Registered, dual channel memory architecture, HPE SmartMemory, slots 17 - 32 are available in two-processor configuration only
Configuration Features 1 x 32 GB
RAM Supported PC4-21333 - 4 TB Load-Reduced ¦ PC4-21333 - 1 TB registered

Hard Drive

Type No HDD

Storage Controller

Type 1 x RAID - PCIe 3.0 x8
Controller Interface Type SATA 6Gb/s / SAS 12Gb/s
Storage Controller Name HPE Smart Array P408i-a
Channel Qty 8
RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, RAID 60, RAID 1 ADM, RAID 10 ADM

Optical Storage

Type No optical drive

Card Reader

Type Card reader
Supported Flash Memory Cards microSD

Monitor

Monitor Type None.

Graphics Controller

Video Memory 16 MB
Video Interfaces VGA

Networking

Ethernet Ports 4 x Gigabit Ethernet
Ethernet Controller HPE 366FLR
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Remote Management Protocol SNMP 3, IPMI 2.0, SMASH CLP
Remote Management Controller Integrated Lights-Out 5
Features Wake on LAN (WoL), PXE support

Expansion / Connectivity

Bays 1 (total) / 1 (free) x external Universal Media Bay ¦ 8 (total) / 8 (free) x hot-swap 2.5" SFF
Slots 2 (total) / 2 (free) x PCIe 3.0 x8 ¦ 1 (total) / 1 (free) x PCIe 3.0 x16
Interfaces 1 x HPE iLO (service port) ¦ 1 x HPE iLO ¦ 4 x LAN (Gigabit Ethernet) ¦ 1 x VGA

Miscellaneous

Included Accessories HPE Easy Install Rails, 4 standard fans
Compliant Standards AES, TLS v1.2, ASHRAE Class A4, ASHRAE Class A3, WEEE 2002/95/EC

Power

Device Type Power supply - hot-plug
Power Redundancy Yes
Power Redundancy Scheme 1+1
Installed Qty 1
Max Supported Qty 2
Power Provided 800 Watt
80 PLUS Certification 80 PLUS Platinum
Efficiency 94%

Operating System / Software

OS Certified Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016, SuSE Linux Enterprise Server 12 SP3, Red Hat Enterprise Linux 7.4, VMware ESXi 6.5 update 1, VMware ESXi 6.5 update 2, VMware ESXi 6.7

Environmental Standards

ENERGY STAR Certified Yes
ENERGY STAR Version 2.1

Manufacturer Warranty

Service & Support Limited warranty - parts and labour - 3 years - on-site - response time: next business day

Dimensions & Weight

Width 44.55 cm
Depth 67.94 cm
Height 8.73 cm
Weight 14.9 kg

Environmental Parameters

Min Operating Temperature 10 °C
Max Operating Temperature 35 °C
Humidity Range Operating 8 - 90% (non-condensing)
Sound Emission 37 dBA

Product Reviews

Ask an Owner

HPE ProLiant DL385 Gen10 - P26898-B21 - Rack-mountable 2U - Server AMD EPYC 2.8 GHz - 32GB

Sorry, customer questions are not available for this product.

Product Discussion

HPE ProLiant DL385 Gen10 - P26898-B21 - Rack-mountable 2U - Server AMD EPYC 2.8 GHz - 32GB

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Call for Pricing

Could server or storage consolidation reduce your running costs by up to 50%? Our solutions specialists can advise the ideal model for your business.

{{#lists}}
  • {{ title }}
  • {{/lists}}

    Add-ons and Accessories

    Server Essentials

    Windows Server 2019 Essentials (Fujitsu ROK)

    £299.57 inc. vat
    £249.64 ex. vat

    Windows Server 2019 Essentials (HPE ROK)

    £296.99 inc. vat
    £247.49 ex. vat

    Windows Server 2019 Essentials (Dell ROK)

    £317.99 inc. vat
    £264.99 ex. vat

    Server Standard

    Windows Server 2019 Standard Edition (Fujitsu ROK)

    £679.98 inc. vat
    £566.65 ex. vat

    Windows Server 2019 Standard (Dell ROK) - 634-BSFX

    £701.99 inc. vat
    £584.99 ex. vat

    Windows Server 2019 Standard Edition (HPE ROK)

    £684.51 inc. vat
    £570.42 ex. vat