Tripp Lite NetCommander 16-Port Cat5 1U Rack Mount 1+1 User Console KVM Switch with 19'' LCD and IP

£ 1,527.99  inc. vat

£ 1,273.32 ex. vat

Tripp Lite NetCommander 16-Port Cat5 1U Rack Mount 1+1 User Console KVM Switch with 19'' LCD and IP

QuickFind: 1137000 Mfr part code: B070-016-19-IP
  • Display resolution: 1280 x 1024 pixels
  • Interface: VGA, USB, PS/2
  • AC adapter input voltage: 100 - 240 V
  • AC adapter frequency: 50/60 Hz

Product Description

Tripp Lite NetCommander 16-Port Cat5 1U Rack Mount 1+1 User Console KVM Switch with 19'' LCD and IP

Tripp Lite's B070-016-19-IP KVM Switch gives you a rack-mountable full keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, it's the optimal solution for controlling up to 16 computers/servers locally, from across the room, down the street or halfway around the globe on a LAN, WAN or Internet. The B070-016-19-IP uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units so you can control computers/servers located up to 30.5 m away from the switch. This switch features two 10/100 Mbps LAN ports, so if one fails, the other takes over, keeping remote access uninterrupted. Users can switch easily between the 16 ports using an on-screen display (OSD). Multi-level password protection prohibits unauthorized users from accessing the connected computers, and a local user and a remote user can be logged on simultaneously. The built-in 19" LCD screen supports video resolutions up to 1366 x 768. Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; you can assign individual ports to an IP PDU port to power on/off the server connected to that port. The B070-016-19-IP stores neatly in a rack drawer and pulls out when needed. This KVM console is compatible with both Windows and Linux operating systems, and provides remote access using a Windows computer. Heavy-duty steel housing stands up to frequent use. Free NetCommander-AXS Management Software is available for access and control of all of your Tripp Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, and manage KVM settings. This software can be found on the model support page of the B070-016-19-IP, or via searching NetCommander-AXS on www.tripplite.com Saves Space and Money ● Combines 16-port KVM switch, 19" LCD screen, keyboard and touchpad in a single 1U rack-mountable drawer ● Mounts into 19"-wide rack, 27"-42" deep; to mount in a 2-post rack, use Tripp Lite's B019-000 ● Inexpensive Cat5e/6/6a cabling lets you locate servers up to 30.5 m from the switch ● Use a Server Interface Unit, B078-101-USB-1 (for USB) with each server that will be connected with Cat5 cable ● To convert DisplayPort or HDMI computers to VGA, use Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary. IP Remote Access for Fewer Trips to the Server Room ● Remote access means there's no need to travel to the server room or network closet ● Java-based application allows Windows computers to control a target server via web browser from any location over a secured IP connection ● A non-browser client is available that allows Windows computers to remotely access the KVM without the need for a browser and without the need to install Java ● 1 local + 1 remote user can access different ports concurrently; up to 5 users can share a single session ● Supports both IPv4 and IPv6 ● Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP KVM's (B070 and B072 IP series) from a single interface Simplifies IT Tasks ● On-screen display, hot keys and remote toolbar for easy use ● 2 serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers ● Add IP PDUs as devices that can be controlled by the KVM; assign individual ports to an IP PDU port to power on/off the server connected to that port ● Virtual Media allows a .iso file to be mounted to a target server and accessed as if it were directly stored on it ● Fast Virtual Media KVM System patented under Pat. No. US 9,417,720 ● System-sent messages to SNMP server notify you of LAN failures ● Supports RADIUS and LDAP/S authentication ● Log tracks events on your installation Large 19" LCD ● Supports video resolutions up to 1366 x 768; 1920 x 1080 remotely ● DDC emulation allows for optimal output to LCD Advanced Security Features ● Multi-level password protection: create administrator accounts with full access and user accounts with limited access ● Supports TLS 1.2 security protocol ● You can install SSL certificates to ensure secure transactions between web servers and browsers Long-Lasting Reliability ● Flash-upgradeable firmware over the network ● Heavy-duty steel housing stands up to use ● Control computers/servers locally or via LAN, WAN or Internet ● Occupies just 1U of space in a rack-mountable drawer ● Low-cost Cat5 cabling allows longer distances, reduces cable clutter ● 19" LCD screen supports video resolutions up to 1366 x 768 ● Simultaneous support for 2 users - 1 local, 1 remote ● Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP KVM's (B070 and B072 IP series) from a single interface ● Fast Virtual Media KVM System patented under Pat. No. US 9,417,720 System Requirements ● Computer with HD15 port, and USB port or PS/2 keyboard/mouse ports ● User-supplied Cat 5e/6/6a cabling ● B078-101-USB-1 (USB) or B078-101-USB2 (USB) Server Interface Unit is required for each connected computer/server; the B078-101-USB2 is required for Fast Virtual Media speeds up to 12Mbps; the B078-101-USB-1 can be used for Virtual Media, but only at speeds up to 1Mbps ● For computers with Displayport or HDMI, change to VGA using Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary. ● Compatible with Windows and Linux operating systems ● Currently not compatible with HP Gen 10 Servers ● Remote access supported using Windows computers ● Remote console computers require minimum Pentium 4 with 2 GB memory ● Hardware versions: A new hardware version (v2) of the B070-016-19-IP was released in 2014, and it requires different firmware than was used in the previous version (v1). In the Support tab on this web page you will find a zip folder for the v1 KVM. In addition to including the applicable firmware, it contains a FW Notes file that will tell you how to determine which hardware version you have, and therefore, which firmware you need to use. If you have a v2 KVM, the latest firmware is that which came pre-installed on the KVM. ● Power consumption: 120V, 60Hz, 30W Package Includes ● B070-016-19-IP 1U rackmount console KVM switch with 19" LCD ● C13 to 5-15P power cord ● Rackmount hardware ● CD with owner's manual ● Quick start guide

Technical Specification

Tripp Lite NetCommander 16-Port Cat5 1U Rack Mount 1+1 User Console KVM Switch with 19'' LCD and IP

General

Display Type KVM console / TFT active matrix
Diagonal Size 19"
Built-in Devices 16 port KVM switch
Native Resolution 1366 x 768 at 60 Hz
Colour Black
Dimensions (WxDxH) 48.3 cm x 68.1 cm x 4.3 cm
Height (Rack Units) 1U
Weight 17 kg

Input

Type Mouse, keyboard, touchpad

KVM

Type KVM switch - 16 ports
Keyboard / Mouse Interface PS/2
Max Resolution 1920 x 1080 @ 60 Hz
Max Cascading Depth 2
Features IP-based user connection

Connectivity

Interfaces 16 x KVM (RJ-45) ¦ Network (RJ-45) ¦ 2 x VGA ¦ 2 x mouse (PS/2) ¦ 2 x keyboard (PS/2)

Miscellaneous

Features Hot keys, hot-swappable
Cables Included 1 x serial cable ¦ 1 x keyboard / mouse / video cable
Rack Mounting Kit Included
Compliant Standards CSA, RoHS, UL 60950-1, IEC 60950-1, FCC Part 15 A, 128-bit SSL

Power

Voltage Required AC 120/230 V (50/60 Hz)

Software / System Requirements

OS Required Microsoft DOS, UNIX, Apple MacOS, Microsoft Windows 98 Second Edition, Linux, FreeBSD, Microsoft Windows NT, Microsoft Windows Server 2003, Microsoft Windows 95/98/ME/2000/XP/Vista

Manufacturer Warranty

Service & Support Limited warranty - 1 year

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 0 - 80%

Product Reviews

Ask an Owner

Tripp Lite NetCommander 16-Port Cat5 1U Rack Mount 1+1 User Console KVM Switch with 19'' LCD and IP

Sorry, customer questions are not available for this product.

Product Discussion

Tripp Lite NetCommander 16-Port Cat5 1U Rack Mount 1+1 User Console KVM Switch with 19'' LCD and IP

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

£ 1,527.99  inc. vat

£ 1,273.32 ex. vat

0% Interest offers available learn more
{{#lists}}
  • {{ title }}
  • {{/lists}}