APC SURT6000XLI RT 6000VA 230V Smart-UPS

APC Smart-UPS On-Line, 4200 Watts/6000 VA, Input 230V/Output 230V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, 3U

Availability

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS overload condition or fault.

Scalable runtime

Allows additional run time to be quickly added as needed.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature

Manageability

Network manageable

Provides remote power management of the UPS over the network

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

SmartSlot

Customize UPS capabilities with management cards.

LED status indicators

Quickly understand unit and power status with visual indicators.

Serial Connectivity

Provides management of the UPS via a serial port.

Adaptability

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP

Serviceability

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced

Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Protection

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable

Provides temporary battery power when the utility power is out.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Includes:CD with software, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card