APC SMT2200I Smart-UPS 1980 Watts / 2200 VA LCD 230V

QuickFind: 226812 Mfr part code: SMT2200I
  • For UPS advice email SOLUTIONS@EBUYER.COM
  • Power Capacity: 1980 Watts / 2200 VA
  • Output Connections: (8) IEC 320 C13/(1) IEC 320 C19/(2) IEC Jumpers
  • Nominal Output Voltage: 230V

More Product Options

Product Description

APC SMT2200I Smart-UPS 1980 Watts / 2200 VA LCD 230V

APC Smart-UPS 2200VA LCD 230V Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable

For the replacement battery please see Quick Find 124898.

Key Features
  • Output Power Capacity - 1980 Watts / 2200 VA
  • Nominal Output Voltage - 230V
  • Output Connections - (8) IEC 320 C13/(1) IEC 320 C19/(2) IEC Jumpers
  • Input Frequency - 50/60 Hz +/- 3 Hz (auto sensing)
  • Input Connections - IEC-320 C20/Schuko CEE 7/EU1-16P/British BS1363A

Features

  • Intuitive LCD interface

  • Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

  • Predictive replace battery date

  • Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

  • Green mode

  • Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection

  • Energy meter

  • Provides actual kilowatt hours of usage for energy conscious users.

  • Sequenced shutdown and restart

  • Configure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).

  • Pure sine wave output on battery

  • Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics

  • Single switched outlet group

  • Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding

  • StruxureWare Central compatible

  • Enables centralized management via StruxureWare Central

  • High online efficiency

  • Reduces utlility costs, generates less heat

  • SmartSlot

  • Customize UPS capabilities with management cards

  • Cold-start capable

  • Provides temporary battery power when the utility power is out.

  • Temperature-compensated battery charging

  • Prolongs battery life by regulating the charge voltage according to battery temperature

Availability

  • Boost and Trim Automatic Voltage Regulation (AVR)

  • Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

  • Intelligent battery management

  • Maximizes battery performance, life, and reliability through intelligent, precision charging.

  • Power conditioning

  • Protects connected loads from surges, spikes, lightning, and other power disturbances

  • Temperature-compensated battery charging

  • Prolongs battery life by regulating the charge voltage according to battery temperature

  • Automatic restart of loads after UPS shutdown

  • Automatically starts up the connected equipment upon the return of utility power

  • Automatic self-test

  • Periodic battery self-test ensures early detection of a battery that needs to be replaced

  • Disconnected battery notification

  • Warns when a battery is not available to provide backup power

Manageability

  • Network manageable

  • Provides remote power management of the UPS over the network

  • Audible alarms

  • Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition

  • LED status indicators

  • Quickly understand unit and power status with visual indicators

  • Serial Connectivity

  • Provides management of the UPS via a serial port

  • USB connectivity

  • Provides management of the UPS via a USB port (not available on all models).

  • Disconnected battery notification

  • Warns when a battery is not available to provide backup power

Serviceability

  • User-replaceable batteries

  • Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

  • Hot-swappable batteries

  • Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

  • Predictive failure notification

  • Provides early-warning fault analysis ensuring proactive component replacement

  • Resettable circuit breakers

  • Enables a quick recovery from overload events

  • Battery failure notification

  • Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

  • Adjustable voltage-transfer points

  • Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation

  • Adjustable voltage sensitivity

  • Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications

Safety

  • Safety-agency approved

  • Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Technical Specification

APC SMT2200I Smart-UPS 1980 Watts / 2200 VA LCD 230V

General

Width 19.7 cm
Depth 54.4 cm
Height 43.5 cm
Weight 48.8 kg
Enclosure Colour Black
Output Connectors 9 x power IEC 60320 C13, power IEC 60320 C19
Device Type UPS - external
Colour Black

Power Device

Surge Suppression Yes
Input Connector(s) Power IEC 320 EN 60320 C20, power BS 1363, power CEE 7/16
Output Voltage AC 220/230/240 V ± 5% - 47 - 53 / 57 - 63 Hz
Input Connectors Power IEC 60320 C20, power BS 1363, Europlug (power CEE 7/16)
Power Output Connectors Details 8 x power IEC 60320 C13 ¦ 1 x power IEC 60320 C19
Frequency Provided 47 - 53 / 57 - 63 Hz
UPS Technology Line interactive
Input Voltage AC 230 V
Input Voltage Range AC 160 - 286 V
Input Voltage Range (Adjustable) AC 151 - 302 V
Frequency Required 50/60 Hz
Power Capacity 1.98 kW / 2200 VA
Output Waveform Sinewave
Surge Energy Rating 365 Joules
Circuit Protection Circuit breaker

Battery

Recharge Time 3 hours
Quantity 1
Technology Lead Acid
Run Time (Up To) 6.7 min at full load ¦ 24.1 min at half load

Expansion / Connectivity

Interfaces 1 x management (RS-232) ¦ 1 x management (USB)
Expansion Slot(s) 1 (total) / 1 (free) x SmartSlot
Expansion Slots 1 (total) / 1 (free) x SmartSlot

Manufacturer Warranty

Service & Support Limited warranty - 3 years ¦ Limited warranty - batteries - 2 years
Service & Support Details Limited warranty - 3 years ¦ Limited warranty - batteries - 2 years

Miscellaneous

Cables Included Serial cable - external ¦ USB cable - external
Features Audible alarm, LCD display
Compliant Standards C-Tick, UL 1449, VDE, EN 50091-2, RoHS Exemption 7b, EN 50091-1

Networking

Remote Management Interface RS-232, USB

Software / System Requirements

Software Included Drivers & Utilities

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 0 - 95%
Sound Emission 45 dBA

Dimensions & Weight

Width 19.7 cm
Depth 54.4 cm
Height 43.5 cm
Weight 48.8 kg

Dimensions & Weight (Shipping)

Shipping Width 38.1 cm
Shipping Depth 76.2 cm
Shipping Height 69.9 cm
Shipping Weight 61.9 kg

Product Reviews

Ask an Owner

APC SMT2200I Smart-UPS 1980 Watts / 2200 VA LCD 230V

Sorry, customer questions are not available for this product.

Product Discussion

APC SMT2200I Smart-UPS 1980 Watts / 2200 VA LCD 230V

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Sorry, this product is currently out of stock.

Enter your email address below if you would like to be informed when this product is back in stock.

By entering your email address here you are agreeing that you would like to be notified when this product is back in stock and you have read and agree to our privacy policy

Add-ons and Accessories

Recommended

APC RBC55 Replacement Battery Cartridge #55

£425.99 inc. vat
£354.99 ex. vat