Sorry, this product is currently out of stock
Enter your email address below if you would like to be informed when this product is back in stock.
D-Link Wireless-N Open Source Access Point
- Access Point
- 2.4 GHz
Mfr part code: DAP-1360
D-Link Wireless-N Open Source Access Point Product Description
This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage and cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router.
Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering and the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function allows you to turn the wireless network off when not needed, saving energy.
D-Link Click'n Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install and configure the device without prior knowledge required.
Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform.
Processor / Memory / Storage
Expansion / Connectivity
|Interfaces||1 x 100Base-TX - RJ-45||
|Power Device||External power adapter||
|Device Type||Radio access point|
|Line Coding Format||DBPSK, DQPSK, CCK, OFDM|
|Data Link Protocol||IEEE 802.11b, IEEE 802.11g, IEEE 802.11n|
|Spread Spectrum Method||OFDM|
|Remote Management Protocol||HTTP|
|Frequency Band||2.4 GHz|
|Status Indicators||Power, LAN, wireless|
|Features||Auto-negotiation, repeating mode, MAC address filtering, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), wireless bridge mode, Wireless Client Mode|
|Encryption Algorithm||AES, 128-bit WEP, 64-bit WEP, TKIP, WPA-PSK, WPA2-PSK|
|Authentication Method||Radio Service Set ID (SSID), Extensible Authentication Protocol (EAP)|
|Compliant Standards||IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n||
|Gain Level||2 dBi||
|Included Accessories||Vertical stand|
|Cables Included||1 x network cable|
|Compliant Standards||FCC Class B certified||
Software / System Requirements
|Software Included||Drivers & Utilities||
|Min Operating Temperature||0 °C|
|Max Operating Temperature||55 °C|
|Humidity Range Operating||10 - 90% (non-condensing)|
D-Link Wireless-N Open Source Access Point Ask an owner
D-Link Wireless-N Open Source Access Point Product Discussion
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.