HPE J9640A - E8206 zl Switch L4 Managed
- Networking Product Advice:
- 01430 433 671 or Solutions@Ebuyer.com
- Managed
- Rack-mountable
- 6U
Product Description
HPE J9640A - E8206 zl Switch L4 Managed
Performance, Resilience and SDN Ready for the Campus Network
The HP 8200 zl Switch Series provides performance and resilience for enterprise edge and small core deployments. This modular switch offers redundant management, fabric and power, robust Layer 3 feature set including IPv4 BGP, policy based routing, and IPv4/IPv6 OSPF with no software licensing.
Purpose-built HP Networking ASIC delivers wire-speed classification and policy enforcement. This hardware-based control of access and traffic allows protection, detection and response to network threats with no network performance degradation.
6 or 12 slot chassis with flexible connectivity support for 10/100, Gigabit Ethernet and 10 Gigabit Ethernet (10GBASE-T and SFP+), and PoE+.
Virtualization with versatile HP AllianceOne service modules.
SDN ready with OpenFlow 1.3 support for future proofing your network.
Redundant Management, Fabric and Power
The HP 8200 zl Switch Series supports redundant management, fabric and power for enhanced system availability and continuity of operations.
Nonstop switching improves network availability to better support critical applications such as unified communications and mobility because the interface and fabric modules continue switching traffic during failover from active to the standby management module.
Nonstop routing enhances Layer 3 high availability. OSPFv2/v3 and VRRP will continue to operate and route network traffic during failover.
Redundant fan design and hot-swapable fan tray provides continuity of operation in case of a single fan failure.
Security and Quality of Service
The HP 8200 zl Switch Series includes security and quality of services features so your network can more securely deliver the performance your users require.
Flexible authentication options include Local MAC Authentication, 802.1X, MAC and Web Authentication, for enhanced security and policy-driven application authentication.
Advanced distributed denial of service (DDOS) protection, such as DHCP Snooping, IP Source Guard, and ARP Protection, and flexible traffic controls, such as policy-based routing, QoS, and ACLs, to manage end-to-end application priorities.
Powerful multilevel-access security controls, such as varying security management login, RADIUS/TACACS+, and SSH to enhance security and control change management access.
Defend the edge of your IPv6 Network with DHCPv6 Protection and Dynamic IPv6 Lockdown.
Single View of the Network
The HP 8200 zl Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) Software Platform to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON, XRMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
Connectivity
High-density port connectivity: provides 12 interface module slots, up to 288 wire-speed 10/100/1000 PoE-enabled ports, or 96 10-GbE ports per system
IEEE 802.3az Energy Efficient Ethernet: lowers power consumption in periods of low-link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
IEEE 802.3at Power Over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE-/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
Jumbo frames: on Gigabit Ethernet and 10-Gigabit ports, jumbo frames allow high-performance remote backup and disaster-recovery services
Performance
High-speed, high-capacity architecture: 1.12 Tbps crossbar switching fabric provides intra- and inter-module switching with 739.2 million pps throughput on the purpose-built HP ProVision ASICs
Selectable queue configurations: allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
Scalable system design: chassis architecture/backplane provides built-in performance capacity/headroom to support next-generation high-density/high-speed connectivity
Resiliency and high availability
Nonstop switching: improves network availability to better support critical applications such as unified communication and mobility; interface and fabric modules continue switching traffic during failover from active to standby management module
Nonstop routing: enhances Layer 3 high availability; OSPFv2/v3 and VRRP will continue to operate and route network traffic during failover from an active to a standby management module
Redundant management, fabric, and power: provide enhanced system availability and continuity of operations
Distributed trunking: enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing
IEEE 802.1s Multiple Spanning Tree Protocol: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
Technical Specification
HPE J9640A - E8206 zl Switch L4 Managed
Expansion / Connectivity |
|
---|---|
Interfaces | 1 x RJ-45 management ¦ 1 x USB Type A |
Expansion Slot(s) | 6 (total) / 6 (free) x Expansion Slot |
Expansion Slots | 6 (total) / 6 (free) x Expansion Slot |
Installed Modules Qty (Max) | 6 (max) |
Power |
|
Power Device | Internal power supply (not installed) |
Installed Qty | 2 (max) |
Max Supported Qty | 2 |
Voltage Required | AC 120/230 V (50/60 Hz) |
Miscellaneous |
|
Width | 44.3 cm |
Depth | 44.4 cm |
Height | 26.3 cm |
Weight | 21.8 kg |
Compliant Standards | FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 60950, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, FCC Part 15 |
General |
|
Enclosure Type | Rack-mountable 6U |
Remote Management Protocol | SNMP 1, RMON 2, RMON, SNMP 3, SNMP 2c, HTTP, TFTP, XRMON |
Features | Hot swap module replacement, VLAN support, IPv6 support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, STP Root Guard, Uni-Directional Link Detection (UDLD), sFlow v5 |
RAM | 256 MB DDR SDRAM |
Flash Memory | 4 MB |
Device Type | Switch - L4 - Managed - with HP E8200 zl Switch Premium License |
Subtype | 10 Gigabit Ethernet |
Power Over Ethernet (PoE) | PoE |
Performance | Throughput: up to 369.6 Mpps ¦ Switching fabric bandwidth: 561.6 Gbps ¦ Routing/switching capacity: 496.8 Gbps |
Capacity | Routing tables: 10000 ¦ MAC addresses: 64000 |
MAC Address Table Size | 10K entries |
Jumbo Frame Support | Yes |
Routing Protocol | RIP-1, RIP-2, OSPFv2, IGMPv3, OSPFv3, MLDv2, MLD |
Encryption Algorithm | SSL |
Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at |
Processor | 1 x Freescale PowerPC 8540: 666 MHz |
Dimensions & Weight |
|
Width | 44.25 cm |
Depth | 44.42 cm |
Height | 26.29 cm |
Weight | 21.82 kg |
Environmental Parameters |
|
Humidity Range Operating | 15 - 95% (non-condensing) |
Humidity Range Storage | 15 - 95% (non-condensing) |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 45 °C |
Min Storage Temperature | -40 °C |
Max Storage Temperature | 70 °C |
Manufacturer Warranty |
|
Service & Support | Limited warranty - advance hardware replacement - lifetime - response time: next business day |
Product Reviews
Ask an Owner
HPE J9640A - E8206 zl Switch L4 Managed
Sorry, customer questions are not available for this product.
Product Discussion
HPE J9640A - E8206 zl Switch L4 Managed
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Call for Pricing
Our customers on average save 10% on their networking quotes by speaking to our solutions specialists.