Cisco Catalyst 2960XR-48TD-I Managed Switch L3
- Device Type: Switch - 48 ports - L3 - Managed - stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 2 x SFP+
More Product Options

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 24
- Model
- 2960XR-24TD-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 24
- Model
- 2960XR-24PD-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 48
- Model
- 2960XR-48LPD-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 24
- Model
- 2960XR-24TS-I
Call for pricing

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 48
- Model
- 2960XR-48TD-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 24
- Model
- 2960XR-24PS-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 48
- Model
- 2960XR-48LPS-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 48
- Model
- 2960XR-48FPS-I
Out of stock

- Manufacturer
- Cisco
- Number of Ethernet Ports
- 48
- Model
- 2960XR-48FPD-I
Out of stock
Product Description
Cisco Catalyst 2960XR-48TD-I Managed Switch L3
The Cisco Catalyst 2960-X series switches provide a range of security features to limit access to the network and mitigate threats.
Redundancy and resiliency
Cisco Catalyst 2960-X series switches offer a number of redundancy and resiliency features to prevent outages and help ensure that the network remains available.
Application visibility
Catalyst 2960-X series switches support NetFlow Lite,which enables IT teams to understand the mix of traffic on their network and identify anomalies by capturing and recording specific packet flows.
Power management
The 2960-X switches offer a range industry leading features for effective energy efficiency and energy management.
Network management
The Cisco Catalyst 2960-X series switches offer a superior CLI for detailed configuration and administration. 2960-X series switches are also supported in the full range of Cisco network management solutions.
Intelligent Power over Ethernet Plus
Cisco Catalyst 2960-X series switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones,Cisco Aironet wireless access points,or other standards-compliant PoE/PoE+ end devices. PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
Main Specifications
- Product Description: Cisco Catalyst 2960XR-48TD-I - switch - 48 ports - Managed - desktop, rack-mountable
- Device Type: Switch - 48 ports - L3 - Managed - stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 2 x SFP+
- Performance: Switching capacity:216 Gbps Forwarding performance:130.9 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
- Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI
- Features: Layer 2 switching, auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az Power AC 120/ 230 V ( 50/ 60 Hz )
- Power Redundancy: Yes
- Dimensions: (WxDxH) 44.5 cm x 40.8 cm x 4.45 cm
- Weight:6.1kg
- Manufacturer Warranty: Limited lifetime warranty
Technical Specification
Cisco Catalyst 2960XR-48TD-I Managed Switch L3
General |
|
---|---|
Enclosure Type | Desktop, rack-mountable 1U |
Performance | Switching capacity: 216 Gbps ¦ Forwarding performance: 130.9 Mpps |
Capacity | Virtual interfaces (VLANs): 1023 |
Processor | 1 x ARM: 600 MHz |
Status Indicators | Port status, port transmission speed, port duplex mode, system, link/activity |
Device Type | Switch - 48 ports - L3 - Managed - stackable |
Subtype | Gigabit Ethernet |
Ports | 48 x 10/100/1000 + 2 x SFP+ |
Jumbo Frame Support | 9216 bytes |
Max Units In A Stack | 8 |
Routing Protocol | OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng |
Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS+ |
Features | Layer 2 switching, auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az |
RAM | 512 MB |
Flash Memory | 128 MB |
Manufacturer Warranty |
|
Service & Support Details | Limited warranty - lifetime |
Service & Support | Limited warranty - lifetime |
Power |
|
Voltage Required | AC 120/230 V (50/60 Hz) |
Installed Qty | 1 |
Power Device | Internal power supply - hot-plug |
Max Supported Qty | 2 |
Power Redundancy | Yes |
Power Redundancy Scheme | 1+1 |
Power Provided | 250 Watt |
Expansion / Connectivity |
|
Interfaces | 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 2 x SFP+ ¦ 1 x USB Type A ¦ 1 x USB Type B ¦ 1 x console RJ-45 ¦ 1 x management (LAN) RJ-45 |
Miscellaneous |
|
Compliant Standards | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, CB, ICES-003 Class A, RoHS, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, FCC Part 15 A, CSA C22.2 No. 60950-1, VCCI Class A, KN22, KN24, EN 300 386 |
MTBF | 440,880 hours |
Software / System Requirements |
|
Software Included | Cisco IOS IP Lite |
Dimensions & Weight |
|
Width | 44.5 cm |
Depth | 40.8 cm |
Height | 4.45 cm |
Weight | 6.1 kg |
Environmental Parameters |
|
Min Operating Temperature | -5 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 10 - 95% (non-condensing) |
Min Storage Temperature | -25 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 10 - 95% (non-condensing) |
Product Reviews
Ask an Owner
Cisco Catalyst 2960XR-48TD-I Managed Switch L3
Sorry, customer questions are not available for this product.
Product Discussion
Cisco Catalyst 2960XR-48TD-I Managed Switch L3
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Sorry, this product is currently out of stock.
Enter your email address below if you would like to be informed when this product is back in stock.
By entering your email address here you are agreeing that you would like to be notified when this product is back in stock and you have read and agree to our privacy policy