HyperX Fury 16GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory

QuickFind: 633796 Mfr part code: HX316C10FK2/16
  • Easy to install features plug-and-play functionality
  • Automatic overclocking reach faster speeds and higher capacities by installing the...
  • Reliable 100% factory tested

Product Description

HyperX Fury 16GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory

CL(IDD) 10 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 37.5ns (min.)
Maximum Operating Power TBD W* (per module)
UL Rating 94 V - 0
Operating Temperature 0oC to 85o C
Storage Temperature -55oC to +100o C
*Power will vary depending on the SDRAM used.
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180" (30.00mm), double sided component

Technical Specification

HyperX Fury 16GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory


Capacity 16 GB: 2 x 8 GB
Upgrade Type Generic


Speed 1600 MHz (PC3-12800)
Latency Timings CL10 (10-10-10-30)
Features Black PCB, FURY asymmetric heatspreader, unbuffered
Type DRAM memory kit
Technology DDR3 SDRAM
Form Factor DIMM 240-pin
Module Height (inch) 1.29
Data Integrity Check Non-ECC
Module Configuration 1024 x 64
Voltage 1.5 V
Lead Plating Gold

Manufacturer Warranty

Service & Support Limited lifetime warranty (Russia - 10 years)

Expansion / Connectivity

Compatible Slots 2 x memory - DIMM 240-pin


Colour Category Blue

Product Reviews

Ask an Owner

HyperX Fury 16GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory

Sorry, customer questions are not available for this product.

Product Discussion

HyperX Fury 16GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Sorry, this product is currently out of stock.

Enter your email address below if you would like to be informed when this product is back in stock.

By entering your email address here you are agreeing that you would like to be notified when this product is back in stock and you have read and agree to our privacy policy