Sorry, this product is currently out of stock
Enter your email address below if you would like to be informed when this product is back in stock.
HyperX Fury Series 8GB 1600MHz DDR3 CL10 DIMM Memory
Mfr part code: HX316C10F/8
Customers Who Viewed This Product Also Viewed
HyperX Fury Series 8GB 1600MHz DDR3 CL10 DIMM Memory Product Description
Get in the game faster with automatic overclocking up to the highest frequency published.
Low voltage options
HyperX FURY DDR3 offers low 1.35V options to draw less power and generate less heat - while increasing reliability. This low power offering is compatible with Intel's 100 Series chipset.
Aggressive look, asymmetrical design
Its innovative design makes HyperX FURY DDR3 memory stand out from the crowd. Its asymmetrical heat spreader and black PCB complement the look of many systems.
In multiple colours to match your system
HyperX FURY DDR3 comes in multiple colours, so there's sure to be one that goes with your system or that custom case mod you've been working on.
CL(IDD) 10 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 37.5ns (min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature 0oC to 85o C
Storage Temperature -55oC to +100o C
*Power will vary depending on the SDRAM used.
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180" (30.00mm), double sided component
|Speed||1600 MHz (PC3-12800)|
|Latency Timings||CL10 (10-10-10-30)|
|Features||Black PCB, FURY asymmetric heatspreader, unbuffered|
|Form Factor||DIMM 240-pin|
|Module Height (inch)||1.29|
|Data Integrity Check||Non-ECC|
|Module Configuration||1024 x 64|
|Service & Support||Limited lifetime warranty (Russia - 10 years)||
Expansion / Connectivity
|Compatible Slots||1 x memory - DIMM 240-pin||
HyperX Fury Series 8GB 1600MHz DDR3 CL10 DIMM Memory Ask an owner
HyperX Fury Series 8GB 1600MHz DDR3 CL10 DIMM Memory Product Discussion
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.