HyperX Fury Black Series 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Desktop Memory

£ 57.99  inc. vat

£65.60save £7.61

£ 48.32 ex. vat

£54.66save £6.34

HyperX Fury Black Series 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Desktop Memory

QuickFind: 633821 Mfr part code: HX316C10FBK2/8
  • 2 x 4GB Kit
  • Easy to install - features plug-and-play functionality
  • Automatic overclocking - reach faster speeds and higher capacities by installing the...

Product Description

HyperX Fury Black Series 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Desktop Memory

SPECIFICATIONS
CL(IDD) 10 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 37.5ns (min.)
Maximum Operating Power TBD W* (per module)
UL Rating 94 V - 0
Operating Temperature 0oC to 85o C
Storage Temperature -55oC to +100o C
*Power will vary depending on the SDRAM used.

FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180" (30.00mm), single sided component

Technical Specification

HyperX Fury Black Series 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Desktop Memory

General

Capacity 8 GB: 2 x 4 GB
Upgrade Type Generic

Memory

Speed 1600 MHz (PC3-12800)
Latency Timings CL10 (10-10-10-30)
Features Black PCB, FURY asymmetric heatspreader, unbuffered
Type DRAM
Technology DDR3 SDRAM
Form Factor DIMM 240-pin
Module Height (inch) 1.29
Data Integrity Check Non-ECC
Module Configuration 512 x 64
Voltage 1.5 V
Lead Plating Gold

Manufacturer Warranty

Service & Support Limited lifetime warranty (Russia - 10 years)

Expansion / Connectivity

Compatible Slots 2 x memory - DIMM 240-pin

Miscellaneous

Colour Category Black

Product Reviews

Ask an Owner

HyperX Fury Black Series 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Desktop Memory

Sorry, customer questions are not available for this product.

Product Discussion

HyperX Fury Black Series 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Desktop Memory

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 57.99  inc. vat

£65.60save £7.61

£ 48.32 ex. vat

£54.66save £6.34
{{#lists}}
  • {{ title }}
  • {{/lists}}
    Click & Collect available for this product.