Sorry, this product is currently out of stock
Enter your email address below if you would like to be informed when this product is back in stock.
HyperX Fury 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory
- Easy to install - features plug-and-play functionality
- Automatic overclocking - reach faster speeds and higher capacities by installing the...
- Reliable - 100% factory tested
Mfr part code: HX316C10FK2/8
Customers Who Viewed This Product Also Viewed
£ 66.99 inc. vat
£55.82 ex. vat
£ 63.99 inc. vat£77.30save £13.31
£53.32 ex. vat£64.41save £11.09
HyperX Fury 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory Product Description
CL(IDD) 10 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 37.5ns (min.)
Maximum Operating Power TBD W* (per module)
UL Rating 94 V - 0
Operating Temperature 0C to 85C
Storage Temperature -55C to +100C
*Power will vary depending on the SDRAM used.
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180" (30.00mm), single sided component
|Capacity||8 GB: 2 x 4 GB|
|Speed||1600 MHz (PC3-12800)|
|Latency Timings||CL10 (10-10-10-30)|
|Features||Black PCB, FURY asymmetric heatspreader, unbuffered|
|Form Factor||DIMM 240-pin|
|Module Height (inch)||1.29|
|Data Integrity Check||Non-ECC|
|Module Configuration||512 x 64|
|Chips Organization||512 x 8|
|Service & Support||Limited lifetime warranty (Russia - 10 years)||
Expansion / Connectivity
|Compatible Slots||2 x memory - DIMM 240-pin||
HyperX Fury 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory Ask an owner
HyperX Fury 8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory Product Discussion
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.