HPE 5130-48G-4SFP+ EI Managed Switch L3
QuickFind: 665469
Mfr part code: JG934A
- Networking Product Advice:
- 01430 433 671 or Solutions@Ebuyer.com
- Switch
- Managed
- 48 Ports
Product Description
HPE 5130-48G-4SFP+ EI Managed Switch L3
Advanced classifier-based QoS
classifies traffic using multiple match criteria based on layer 2,3,and 4 information;applies QoS policies such as setting priority level and rate limit to selected traffic on a port,VLAN,or whole switch.
Remote configuration and management
enables configuration and management through a secure web browser or a CLI located on a remote device.
Remote intelligent mirroring
mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network.
High-density connectivity
Provides up to 48 fixed 10/100/1000BASE-T ports in a layer 2/layer 3 switch.
High-bandwidth CX4 local stacking
Achieves 12 Gb/s per connection when using local CX4 stacking,allowing for up to 96 Gb/s total stacking bandwidth (full duplex) in a resilient stacking configuration.
Nonblocking architecture
Up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput.
Hardware-based wirespeed access control lists (ACLs)
Help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation.
Rapid Ring Protection Protocol (RRPP)
Connects multiple switches in a high-performance ring using standard Ethernet technology;traffic can be rerouted around the ring in less than 50 ms,reducing the impact on traffic and applications.
VLAN support and tagging
Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs.
Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks;supports client;DHCP Relay enables DHCP operation across subnets.
Secure management access
Delivers secure encryption of all access methods (CLI,GUI,or MIB) through SSHv2,SSL,and/or SNMPv3.
Main Specifications
- Product Description: HPE 5130-48G-4SFP+ EI - switch - 48 ports - Managed - rack-mountable
- Device Type: Switch - 48 ports - L3 - Managed - stackable
- Enclosure Type: Rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+
- Performance: Throughput:130.9 Mpps Routing/ switching capacity:176 Gbps
- Capacity: IPv4 routing table entries:512 IPv6 routing table entries:256
- MAC Address Table Size: 16384 entries
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: Static IPv4 routing, static IPv6 routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI
- Features: DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Weighted Round Robin (WRR) queuing, IPv6 support, half duplex mode, full duplex mode, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, DHCP relay, Port Security, dynamic ARP protection, DHCP protection, Strict Priority Queuing (SPQ), port isolation, tagged VLAN, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V
- Dimensions: (WxDxH) 44 cm x 26 cm x 4.36 cm
- Weight: 5kg
- Manufacturer Warranty: Limited lifetime warranty
classifies traffic using multiple match criteria based on layer 2,3,and 4 information;applies QoS policies such as setting priority level and rate limit to selected traffic on a port,VLAN,or whole switch.
Remote configuration and management
enables configuration and management through a secure web browser or a CLI located on a remote device.
Remote intelligent mirroring
mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network.
High-density connectivity
Provides up to 48 fixed 10/100/1000BASE-T ports in a layer 2/layer 3 switch.
High-bandwidth CX4 local stacking
Achieves 12 Gb/s per connection when using local CX4 stacking,allowing for up to 96 Gb/s total stacking bandwidth (full duplex) in a resilient stacking configuration.
Nonblocking architecture
Up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput.
Hardware-based wirespeed access control lists (ACLs)
Help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation.
Rapid Ring Protection Protocol (RRPP)
Connects multiple switches in a high-performance ring using standard Ethernet technology;traffic can be rerouted around the ring in less than 50 ms,reducing the impact on traffic and applications.
VLAN support and tagging
Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs.
Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks;supports client;DHCP Relay enables DHCP operation across subnets.
Secure management access
Delivers secure encryption of all access methods (CLI,GUI,or MIB) through SSHv2,SSL,and/or SNMPv3.
Main Specifications
- Product Description: HPE 5130-48G-4SFP+ EI - switch - 48 ports - Managed - rack-mountable
- Device Type: Switch - 48 ports - L3 - Managed - stackable
- Enclosure Type: Rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+
- Performance: Throughput:130.9 Mpps Routing/ switching capacity:176 Gbps
- Capacity: IPv4 routing table entries:512 IPv6 routing table entries:256
- MAC Address Table Size: 16384 entries
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: Static IPv4 routing, static IPv6 routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI
- Features: DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Weighted Round Robin (WRR) queuing, IPv6 support, half duplex mode, full duplex mode, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, DHCP relay, Port Security, dynamic ARP protection, DHCP protection, Strict Priority Queuing (SPQ), port isolation, tagged VLAN, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V
- Dimensions: (WxDxH) 44 cm x 26 cm x 4.36 cm
- Weight: 5kg
- Manufacturer Warranty: Limited lifetime warranty
Technical Specification
HPE 5130-48G-4SFP+ EI Managed Switch L3
General |
|
|---|---|
| Enclosure Type | Rack-mountable 1U |
| Performance | Throughput: 130.9 Mpps ¦ Routing/switching capacity: 176 Gbps |
| Capacity | IPv4 routing table entries: 512 ¦ IPv6 routing table entries: 256 |
| RAM | 1 GB SDRAM |
| Device Type | Switch - 48 ports - L3 - Managed - stackable |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ |
| MAC Address Table Size | 16384 entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | Static IPv4 routing, static IPv6 routing |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI |
| Encryption Algorithm | SSL |
| Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS |
| Features | DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Weighted Round Robin (WRR) queuing, IPv6 support, half duplex mode, full duplex mode, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, DHCP relay, Port Security, dynamic ARP protection, DHCP protection, Strict Priority Queuing (SPQ), port isolation, tagged VLAN, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
| Flash Memory | 128 MB |
Manufacturer Warranty |
|
| Service & Support | Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - phone consulting - 3 years |
| Service & Support Details | Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - phone consulting - 3 years |
Expansion / Connectivity |
|
| Interfaces | 48 x 1000Base-T RJ-45 ¦ 4 x Gigabit / 10Gbit LAN SFP+ ¦ 1 x console RJ-45 management |
Miscellaneous |
|
| Compliant Standards | FCC Class A certified, CISPR 22 Class A, CISPR 24, NOM, EN55024, EMC, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, ANATEL, FDA, EN 60825-1, EN 61000-4-29, ANSI C63.4-2009, VCCI V-3 Class A ITE, EN 61000-3-3:2008, VCCI V-4, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, IEC 61000-4-3:2006, EN 55022:2010 Class A, EN 300 386, EN 61000-4.4:2012, CAN/CSA-C22.2 No. 60950-1 |
| Rack Mounting Kit | Included |
| MTBF | 61.4 years |
Power |
|
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V |
| Power Consumption Operational | 45 Watt |
Dimensions & Weight |
|
| Width | 44 cm |
| Depth | 26 cm |
| Height | 4.36 cm |
| Weight | 5 kg |
Environmental Parameters |
|
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 10 - 90% (non-condensing) |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 5 - 95% (non-condensing) |
Product Reviews
Ask an Owner
HPE 5130-48G-4SFP+ EI Managed Switch L3
Sorry, customer questions are not available for this product.
Product Discussion
HPE 5130-48G-4SFP+ EI Managed Switch L3
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Call for Pricing
This product may require special order or configuration. Please contact our sales team for pricing or further information.
{{#lists}}
{{ title }}
{{/lists}}
Add-ons and Accessories
Xenta Cat 6 Cables
