HPE FlexFabric 5820X 24XG SFP+ Switch

QuickFind: 707483 Mfr part code: JC102B

24 x 10 Gigabit SFP+ + 4 x 10/100/1000
Rack-mountable 1U
10 Gigabit Ethernet
Stackable

Product Description

HPE FlexFabric 5820X 24XG SFP+ Switch

HP 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet;high-availability architecture;full Layer 2/3 dual-stack IPv4/IPv6;and line-rate,low-latency performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network,consolidating devices and appliances to simplify deployment and reduce power consumption as well as rack space.

Extremely versatile,the switches can be used in high-performance,high-density building or department cores as part of a consolidated network;for data center top-of-rack server access;or as high-performance Layer 3,10GbE aggregation switches in campus and data center networks.

Technical Specification

HPE FlexFabric 5820X 24XG SFP+ Switch

Expansion / Connectivity
Interfaces	4 x 1000Base-T RJ-45 ¦ 1 x console RJ-45 management ¦ 24 x 10Gbit LAN SFP+
General
Device Type	Switch - 24 ports - L3 - Managed - stackable
Enclosure Type	Rack-mountable 1U
Subtype	10 Gigabit Ethernet
Ports	24 x 10 Gigabit SFP+ + 4 x 10/100/1000
Performance	Throughput (64-byte packet size): 363 Mpps ¦ Routing/switching capacity: 488 Gbps ¦ Latency (64-byte packets): 2.02 µs
Capacity	IPv4 routing table entries: 12000
MAC Address Table Size	32K entries
Routing Protocol	OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, VRRPE, policy-based routing (PBR), RIPng, MLDv2, MLD, IS-ISv6, BGP-4+
Remote Management Protocol	SNMP 1, SNMP 2, RMON 1, Telnet, SNMP 3, SNMP 2c, HTTPS, SSH, CLI
Encryption Algorithm	PKI
Authentication Method	Secure Shell (SSH), RADIUS, TACACS, Secure Shell v.2 (SSH2), HWTACACS
Features	Flow control, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, packet filtering, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, IPv6 support, full duplex mode, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, DHCP server, MLD snooping, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), Unicast Reverse Path Forwarding (URPF), IPv4 support, Deficit Weighted Round Robin (DWRR), LLDP support, Link Aggregation Control Protocol (LACP), Port Security, NTP time synchronisation, port isolation
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP)
RAM	2 GB SDRAM
Flash Memory	512 MB
Power
Power Device	Internal power supply
Installed Qty	2 (max)
Voltage Required	(50/60 Hz)
Miscellaneous
Compliant Standards	FCC Class A certified, ETSI, CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, NOM, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EMC, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, FDA, EN 60825-1, CAN/CSA C22.2 No. 60950-1, ANSI C63.4-2003, EN 60825-2
Dimensions & Weight
Width	44 cm
Depth	42.7 cm
Height	4.4 cm
Weight	8.5 kg
Manufacturer Warranty
Service & Support	Limited warranty - advance parts replacement - 1 year
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	45 °C
Humidity Range Operating	10 - 90% (non-condensing)

Product Reviews

Ask an Owner

HPE FlexFabric 5820X 24XG SFP+ Switch

Sorry, customer questions are not available for this product.

Product Discussion

HPE FlexFabric 5820X 24XG SFP+ Switch

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

ShowHide terms and conditions

This tool is open to everyone.
You are responsible for the contents of your comments and any consequences that may arise as a result of them.
Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.