HyperX HX426C15FBK2/8 8GB (2x4GB) 2666MHz 1.2V Memory

£ 66.48  inc. vat

£88.29save £21.81

£ 55.40 ex. vat

£73.57save £18.17

HyperX HX426C15FBK2/8 8GB (2x4GB) 2666MHz 1.2V Memory

QuickFind: 720287 Mfr part code: HX426C15FBK2/8
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • Fly-by topology
  • Terminated control command and address bus
  • Selectable BC4 or BL8 on-the-fly (OTF)

Product Description

HyperX HX426C15FBK2/8 8GB (2x4GB) 2666MHz 1.2V Memory

HyperX HX426C15FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles  Intel® XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V.

Specifications:
- CL(IDD) 15 cycles
- Row Cycle Time (tRCmin) 45ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin) 260ns(min.)
- Row Active Time (tRASmin) 26.25ns(min.)
- UL Rating 94 V - 0
- Operating Temperature 0 oC to +85 oC
- Storage Temperature -55 oC to +100 oC

Features:
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- Height 1.340" (34.04mm), w/heatsink

Technical Specification

HyperX HX426C15FBK2/8 8GB (2x4GB) 2666MHz 1.2V Memory

General

Capacity 8 GB: 2 x 4 GB
Upgrade Type Generic

Memory

Speed 2666 MHz (PC4-21300)
Latency Timings CL15 (15-17-17)
Features Single rank, black heatsink, On-Die Termination (ODT), dual channel, Black PCB, low profile heatspreader, FURY asymmetric heatspreader, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0), unbuffered
Type DRAM
Technology DDR4 SDRAM
Form Factor DIMM 288-pin
Module Height (inch) 1.34
Data Integrity Check Non-ECC
Module Configuration 512 x 64
Chips Organization 512 x 8
Voltage 1.2 V
RAM Performance SPD - 2133 MHz - 1.2 V - CL12 - 12-14-14 ¦ SPD - 2400 MHz - 1.2 V - CL14 - 14-16-16 ¦ SPD - 2666 MHz - 1.2 V - CL15 - 15-17-17 ¦ Intel Extreme Memory Profiles (XMP 2.0) - 2666 MHz - 1.2 V - CL15 - 15-17-17

Manufacturer Warranty

Service & Support Limited lifetime warranty (Russia - 10 years)

Miscellaneous

Colour Category Black

Product Reviews

Ask an Owner

HyperX HX426C15FBK2/8 8GB (2x4GB) 2666MHz 1.2V Memory

Sorry, customer questions are not available for this product.

Product Discussion

HyperX HX426C15FBK2/8 8GB (2x4GB) 2666MHz 1.2V Memory

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 66.48  inc. vat

£88.29save £21.81

£ 55.40 ex. vat

£73.57save £18.17
{{#lists}}
  • {{ title }}
  • {{/lists}}
    Click & Collect available for this product.