APC Switched Rack PDU 2G Zero U
Finance from a month. ( APR) representative.

£ 986.99  inc. vat

£ 822.49 ex. vat

APC Switched Rack PDU 2G Zero U

QuickFind: 720996 Mfr part code: AP8941
  • AC 200/208/230 V
  • Ethernet, RS-232, USB
  • Input: NEMA L6-30
  • Output connectors: 24

Product Description

APC Switched Rack PDU 2G Zero U

Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling,delayed power sequencing,and outlet use management.

APC by Schneider Electric Switched Rack Power Distribution Units (PDUs) enable advanced,user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. New AP8000 series Metered Rack PDUs include real power monitoring,a temperature/humidity sensor port,locking IEC receptacles,and ultra low profile circuit breakers.

User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access,configure,and control Switched Rack PDUs through secure Web,SNMP,Command Line Interface,or Telnet Interfaces which are complimented by Schneider Electric's StruxureWare solution.

Network Management - Full-featured network management interfaces that provide standards-based management via Web,SNMP,and Telnet. Allows users to access,configure,and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web,SNMP,and Telnet. Allows users to access,configure,and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note:Only available on units with the current monitoring capabilities.).

Local Current Monitoring Display - The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only).

Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up,which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load Indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Technical Specification

APC Switched Rack PDU 2G Zero U

General

Output Connectors 24
Device Type Power distribution unit - rack-mountable
Colour Black
Localisation Japan, Canada, United States

Power Device

Input Voltage AC 200/208/230 V
Frequency Required 50/60 Hz
Input Connectors 1 x power NEMA L6-30
Power Output Connectors Details 3 x power IEC 60320 C19 ¦ 21 x power IEC 60320 C13
Output Voltage AC 200/208 V
Max Electric Current 30 A

Networking

Remote Management Interface Ethernet, RS-232, USB
Remote Management Protocol SNMP, Telnet, HTTP

Expansion / Connectivity

Interfaces 1 x management (Ethernet) - RJ-45 ¦ 1 x management (RS-232) ¦ 1 x management (USB)

Miscellaneous

Cables Included Power cable - external - 3.05 m ¦ Serial cable - external
Rack Mounting Kit Included
Features LCD display, current meter, LED indicators, overload protection
Compliant Standards UL, cUL, ICES-003, VCCI Class A ITE, RoHS, FCC Part 15 A, PSE Mark, REACH

Manufacturer Warranty

Service & Support Limited warranty - 2 years

Environmental Parameters

Min Operating Temperature -5 °C
Max Operating Temperature 45 °C
Humidity Range Operating 5 - 95%

Dimensions & Weight

Width 5.6 cm
Depth 4.6 cm
Height 182.9 cm
Weight 7.64 kg

Dimensions & Weight (Shipping)

Shipping Width 16.5 cm
Shipping Depth 12.4 cm
Shipping Height 204 cm
Shipping Weight 10 kg

Compatibility Information

Designed For P/N: AR3100

Product Reviews

Ask an Owner

APC Switched Rack PDU 2G Zero U

Sorry, customer questions are not available for this product.

Product Discussion

APC Switched Rack PDU 2G Zero U

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 986.99  inc. vat

£ 822.49 ex. vat

{{#lists}}
  • {{ title }}
  • {{/lists}}