HyperX Impact 4GB DDR4 2400MHz SODIMM Memory
QuickFind: 722621
Mfr part code: HX424S14IB/4
- 4GB memory
- DDR4 2400MHz
- 1.2V
Product Description
HyperX Impact 4GB DDR4 2400MHz SODIMM Memory
HyperX Impact 4GB DDR4 2400MHz SODIMM Memory
HyperX HX424S14IB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below.
The JEDEC standard electrical and mechanical specifications are as follows:
PnP JEDEC TIMING PARAMETERS:
JEDEC/PnP:
DDR4-2400 CL14-14-14 @1.2V
DDR4-2133 CL13-13-13 @1.2V
XMP Profile #1: DDR4-2400 CL14-14-14 @1.2V
FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.18" (30.00mm)
SPECIFICATIONS
CL(IDD) 14 cycles
Row Cycle Time (tRCmin) 46.75ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.)
Row Active Time (tRASmin) 29.125ns (min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature 0oC to +85oC
Storage Temperature -55oC to +100oC
*Power will vary depending on the SDRAM used.
HyperX HX424S14IB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below.
The JEDEC standard electrical and mechanical specifications are as follows:
PnP JEDEC TIMING PARAMETERS:
JEDEC/PnP:
DDR4-2400 CL14-14-14 @1.2V
DDR4-2133 CL13-13-13 @1.2V
XMP Profile #1: DDR4-2400 CL14-14-14 @1.2V
FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.18" (30.00mm)
SPECIFICATIONS
CL(IDD) 14 cycles
Row Cycle Time (tRCmin) 46.75ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.)
Row Active Time (tRASmin) 29.125ns (min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature 0oC to +85oC
Storage Temperature -55oC to +100oC
*Power will vary depending on the SDRAM used.
Technical Specification
HyperX Impact 4GB DDR4 2400MHz SODIMM Memory
Memory |
|
|---|---|
| Speed | 2400 MHz (PC4-19200) |
| Latency Timings | CL14 (14-14-14) |
| Features | Single rank, On-Die Termination (ODT), Black PCB, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0), unbuffered |
| Type | DRAM memory module |
| Technology | DDR4 SDRAM |
| Form Factor | SO-DIMM 260-pin |
| Module Height (inch) | 1.18 |
| Data Integrity Check | Non-ECC |
| Module Configuration | 512 x 64 |
| Chips Organization | 512 x 8 |
| Voltage | 1.2 V |
| RAM Performance | SPD - 2133 MHz - 1.2 V - CL13 - 13-13-13 ¦ Intel Extreme Memory Profiles (XMP 2.0) - 2400 MHz - 1.2 V - CL14 - 14-14-14 |
Manufacturer Warranty |
|
| Service & Support | Limited lifetime warranty (Russia - 10 years) |
General |
|
| Capacity | 4 GB |
| Upgrade Type | Generic |
Product Reviews
Ask an Owner
HyperX Impact 4GB DDR4 2400MHz SODIMM Memory
Sorry, customer questions are not available for this product.
Product Discussion
HyperX Impact 4GB DDR4 2400MHz SODIMM Memory
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Sorry, this product is currently out of stock.
Enter your email address below if you would like to be informed when this product is back in stock.
By entering your email address here you are agreeing that you would like to be notified when this product is back in stock and you have read and agree to our privacy policy