TP-Link 48-Port Gigabit Smart Switch

£ 376.06  inc. vat

£ 313.38 ex. vat

TP-Link 48-Port Gigabit Smart Switch

QuickFind: 730170 Mfr part code: T1600G-52PS
  • Supports 48 802.3at/af-compliant PoE+ ports with a total power supply of 384W...
  • L2+ Feature——Static Routing, helps route internal traffic for more efficient use of...

More Product Options

Product Description

TP-Link 48-Port Gigabit Smart Switch

TP-LINK PoE Switches


Simplified Network Deployment in Remote Areas without Power Outlets

What is PoE?

Power over Ethernet (PoE) allows network switches to transmit both power and data through an Ethernet cable at the same time.

Why Should I Use PoE

Without PoE, you have to make a choice between running a power cable to the area where you want to deploy a network device or deploying network devices based on where existing power outlets are available. PoE provides greater flexibility and ensures that you will never have to compromise when deploying network devices.
PoE is an IEEE standard for simultaneously transmitting data and low-voltage power throughout a network using a single Ethernet cable. PoE dramatically simplifies the process of installing APs, IP cameras, IP phones, and other PoE enabled devices in hard-to-reach, outdoor, and remote areas.

Lower Infrastructure Costs

A single cable supports both data and power transmission. PoE solutions also require fewer power adapters.

Enhanced Deployment Flexibility

Freedom from fixed power outlets provides more placement options and allows for deployment in complex environments.

Centralized Control

A centralized switch can manage power allocation to all devices.

Simplified Installation

Use existing network infrastructures for rapid deployment, without the need for an electrician.

PoE and PoE+

PoE devices utilize the original PoE standard, IEEE 802.3af, which provides up to 15.4W of DC power to each device. The latest standard, IEEE 802.3at, is known as PoE+ and provides up to 30W of power to each device.

Typical Applications and Power

PoE Switches from TP-LINK

TP-LINK's PoE Switches are specifically designed to utilize either PoE (802.3af) or PoE+ (802.3at) in order to supply power to network devices. Managed and unmanaged PoE switches are available, allowing you to trasnmit electrical power and data via a single cable. This makes it easier than ever to expand your network into areas where power sockets are not accessible.

Managed PoE Switches

Unmanaged PoE Switches

Technical Specification

TP-Link 48-Port Gigabit Smart Switch

General

Enclosure Type Rack-mountable 1U
Performance Switching capacity: 104 Gbps ¦ Forwarding performance: 77.4 Mpps
Ports 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP
Power Over Ethernet (PoE) PoE+
MAC Address Table Size 16K entries
Jumbo Frame Support 9KB
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH, SSH-2, CLI
Features Flow control, BOOTP support, IGMP snooping, DoS attack prevention, port mirroring, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Cable Diagnostics Function, bandwidth control, IP-MAC binding, SNMP trap, DHCP client, Neighbor Discovery Protocol (NDP), port isolation, Loopback, DiffServ Code Point (DSCP) support, 3 fans, system log, ARP inspection, dual image support, Head-of-line (HOL) blocking
Compliant Standards IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
Status Indicators Power, system, 1000M device connected, link/activity
Device Type Switch - 48 ports - Managed
Subtype Gigabit Ethernet
PoE Budget 384 W
Capacity ACL entries: 300 ¦ IPv4 routes (static): 32 ¦ IGMP snooping groups: 256 ¦ Virtual interfaces (VLANs): 4000
Routing Protocol IGMPv2, IGMP, IGMPv3
Encryption Algorithm SSL, TLS, SSL 3.0, SSL 2.0
Authentication Method Secure Shell (SSH), Secure Shell v.2 (SSH2)

Power

Voltage Required AC 120/230 V (50/60 Hz)
Power Device Internal power supply
Power Consumption Operational 470.4 Watt

Expansion / Connectivity

Interfaces 48 x 1000Base-T RJ-45 PoE+ ¦ 4 x SFP

Miscellaneous

Included Accessories 4 rubber feet
Rack Mounting Kit Included
Compliant Standards FCC

Software / System Requirements

Software Included Drivers & Utilities
OS Required UNIX, Apple MacOS, Novell NetWare, Linux, Microsoft Windows Vista / XP / 7 / 8

Dimensions & Weight

Depth 33 cm
Width 44 cm
Height 4.4 cm

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 - 90% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 90% (non-condensing)

Product Reviews

Ask an Owner

TP-Link 48-Port Gigabit Smart Switch

Sorry, customer questions are not available for this product.

Product Discussion

TP-Link 48-Port Gigabit Smart Switch

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

£ 376.06  inc. vat

£ 313.38 ex. vat

0% Interest offers available learn more
{{#lists}}
  • {{ title }}
  • {{/lists}}