HPE 5130 48G 4SFP+ 1-slot HI Switch
- Rack-mountable: 1U
- Ports: 48 x 10/ 100/ 1000 + 4 x 10 Gigabit SFP+
- Subtype: Gigabit Ethernet
Product Description
HPE 5130 48G 4SFP+ 1-slot HI Switch
Technical Specification
HPE 5130 48G 4SFP+ 1-slot HI Switch
General |
|
---|---|
Performance | Throughput: up to 190.5 Mpps ¦ Routing/switching capacity: 256 Gbps |
Capacity | Simultaneous VLANs: 4094 ¦ IPv4 routing table entries: 32768 ¦ IPv6 routing table entries: 16384 |
RAM | 2 GB SDRAM |
Device Type | Switch - 48 ports - L3 - Managed - stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
Jumbo Frame Support | 9KB |
Routing Protocol | RIP-1, RIP-2, IGMPv2, IGMP, PIM-SM, IGMPv3, MSDP, MLD |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP |
Encryption Algorithm | SSL |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS |
Features | Flow control, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, Weighted Round Robin (WRR) queuing, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), DHCP server, Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), STP Root Guard, IPv4 support, LLDP support, Smart Link Pass-Through, dynamic ARP protection, DHCP protection, port isolation, non blocking ports, Strict Priority (SP), Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF), OpenFlow support, IP source guard |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3az |
Flash Memory | 512 MB |
Manufacturer Warranty |
|
Service & Support | Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - phone consulting - 3 years |
Service & Support Details | Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - phone consulting - 3 years |
Power |
|
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Device | Internal power supply (not installed) |
Installed Qty | 2 (max) |
Max Supported Qty | 2 |
Power Redundancy | Optional |
Power Redundancy Scheme | 1+1 (with optional power supply) |
Expansion / Connectivity |
|
Interfaces | 48 x 1000Base-T RJ-45 ¦ 4 x 10Gbit LAN SFP+ ¦ 1 x serial (console) ¦ 1 x USB 2.0 ¦ 1 x management (LAN) RJ-45 |
Expansion Slots | 1 (total) / 1 (free) x Expansion Slot |
Installed Modules Qty (Max) | 1 (installed) / 1 (max) |
Miscellaneous |
|
Compliant Standards | VCCI, EN 61000-3-2, AS/NZS 60950-1, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, GB 4943, ANSI C63.4-2009, EN 60825-2, EN 61000-3-3:2008, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, CISPR 24:2010, EN 55022:2010 Class A, FCC CFR47 Part 15 A, EN 61000-4.4:2012, CAN/CSA-C22.2 No. 60950-1 |
Dimensions & Weight |
|
Width | 44 cm |
Depth | 36 cm |
Height | 4.37 cm |
Weight | 7.5 kg |
Environmental Parameters |
|
Min Operating Temperature | -5 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |
Min Storage Temperature | -40 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 5 - 95% (non-condensing) |
Product Reviews
Ask an Owner
HPE 5130 48G 4SFP+ 1-slot HI Switch
Sorry, customer questions are not available for this product.
Product Discussion
HPE 5130 48G 4SFP+ 1-slot HI Switch
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Call for Pricing
Our customers on average save 10% on their networking quotes by speaking to our solutions specialists.