StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

Finance from £10.56 a month. (14.9% APR) representative.

£ 117.57  inc. vat

£ 97.97 ex. vat

StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

QuickFind: 758289 Mfr part code: ST1030USBM
  • Provides maximum USB scalability, with ten USB 3.0 Type-A ports
  • Rugged, wall-mountable metal housing plus optional DIN rail mounts

Product Description

StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

Add ten USB 3.0 (5Gbps) ports with this DIN rail or surface-mountable metal hub
Provides maximum USB scalability, with ten USB 3.0 Type-A ports
Protects your connected devices with 15kV ESD protection and 350-watt surge protection
Offers flexible, wide-range 7-24V DC terminal block power input (standard AC power adapter not supported or included)
Ideal for harsh industrial environments, with an extended operating temperature range
Rugged, wall-mountable metal housing plus optional DIN rail mounts
Supports USB Battery Charging Specification 1.2 and delivers 1.5 amps to each USB port
Ten SuperSpeed USB 3.0 hub ports, with throughput support up to 5Gbps
Supports multi transaction translators (Multi-TT) on each port for legacy USB devices
Integrated, threaded screw-lock holes - prevent cables from becoming loose or disconnected in an industrial environment
Backward compatible with USB 2.0 and 1.x devices

This 10-port USB 3.0 hub gives you the scalability you need in harsh industrial environments. It's designed to meet the advanced requirements of connecting a high number of devices in factory and industrial settings.
With a metal housing, you can depend on this industrial hub even in tough operating conditions. And because it offers more ports than most USB 3.0 hubs, you can access more devices at once, so you can work more efficiently and save time.

Connect more USB devices
Designed for a high volume of connections in industrial environments, this robust USB 3.0 hub offers ten connection ports, unlike most four or seven-port USB 3.0 (also known as USB 3.1 Gen 1) hubs.
With more ports you can connect more devices, such as USB-based control equipment, external storage, and more. Plus, you can avoid the aggravation of connecting and disconnecting devices when all ports are occupied.

The hub also supports USB Battery Charging Specification 1.2, delivering up to 1.5 amps power to each USB port, so you can charge your mobile devices faster than traditional USB ports allow.

Perfect for harsh industrial environments
This industrial USB hub delivers reliable performance with a metal, heavy-duty housing. And because it supports wide-range 7-24V DC terminal block input, you have the flexibility to power the hub as required, based on your own power input capabilities.
Perfect for factory environments, the rugged hub also supports an extended operating temperature range (0°C to 70°C) and offers surge and ESD protection to each USB port, which can help prevent damage to your connected devices.

Locate the hub where you need it most
With versatile installation options, you can install the hub where it's best suited for your environment. You can securely mount the USB 3.0 hub to a surface, wall, or under a desk, and, it includes optional DIN rail mounts for use with equipment rack installations.

Works with your older USB devices
The industrial hub supports the full 5Gbps bandwidth of USB 3.0 and is also backward compatible with previous USB devices. You can connect your legacy USB 2.0 and 1.x peripherals alongside your newer USB 3.0 devices without any disruptions.
The ST1030USBM is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications
Install the hub in tough conditions that are subject to large temperature variances, or where there's a risk of physical damage
Deploy on assembly lines where only terminal block power is available
Connect a variety of USB devices such as industrial printers or cameras, plus fast-charge your smartphone and tablet

Specifications
Warranty Information
Warranty  2 Years

Hardware
Bus Type  USB 3.0
Chipset ID  Genesys Logic - GL3520
Fast-Charge Port(s)  Yes
Industry Standards  USB Battery Charging Specification Rev. 1.2
USB 3.0 - Backward compatible with USB 2.0/1.1
Interface  USB 3.0
Ports  10
USB-C Device Port(s)  No
USB-C Host Connection  No

Performance
Maximum Data Transfer Rate  5 Gbps
MTBF  119388 hours
Surge Protection  15kV ESD protection 
350 W surge protection
Type and Rate  USB 3.0 - 5 Gbit/s

Connector(s)
Connector Type(s)
10 - USB Type-A (9 pin) USB 3.0 Female
1 - USB Type-B (9 pin) USB 3.0 Female
1 - Terminal Block (2 Wire)

Software
OS Compatibility  OS Independent; No additional drivers or software required

Special Notes / Requirements
Note  If connected to a USB 2.0 host port, performance may be limited
This product is intended for use with terminal block power only - Standard AC adapter not available
System and Cable Requirements Host computer with an available USB 3.0 port

Indicators
LED Indicators 1 - Power (Green)

Power
Input Voltage  7 ~ 24 DC
Power Source  Terminal Block

Environmental

Humidity  5%~95% RH (Non-condensing)
Operating Temperature  0°C to 70°C (32°F to 158°F)
Storage Temperature  -20°C to 85°C (-4°F to 185°F)

Physical Characteristics
Cable Length 2032 mm [80 in]
Color Black
Enclosure Type Steel
Form Factor Industrial
Product Height 31 mm [1.2 in]
Product Length 198 mm [7.8 in]
Product Weight 343 g [12.1 oz]
Product Width 56 mm [2.2 in]

Packaging Information
Shipping (Package) Weight  567 g [20 oz]

What's in the Box
Included in Package
1 - 10-port industrial USB 3.0 hub
1 - USB 3.0 host cable
1 - DIN rail mounting kit
1 - terminal block (2 wire)
1 - instruction manual

Technical Specification

StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

Manufacturer Warranty

Service & Support Limited warranty - 2 years
Service & Support Details Limited warranty - 2 years

Expansion / Connectivity

Interfaces 10 x USB 3.0 Type A ¦ 1 x USB 3.0 Type B

General

Device Type Hub - 10 ports
Enclosure Type DIN rail mountable
Subtype USB
Ports 10 x SuperSpeed USB 3.0
Features Surge protection, 15KV ESD Protector
Compliant Standards USB 1.1, USB 2.0, USB 3.0
Status Indicators Power

Power

Power Device External power adapter
Voltage Required DC 7 - 24 V

Miscellaneous

Colour Black
Included Accessories DIN-rail mounting kit, power terminal block
Cables Included 1 x USB power cable
Compliant Standards FCC, RoHS, WEEE, USB Battery Charging Specification Rev. 1.2

Dimensions & Weight

Width 19.8 cm
Depth 5.6 cm
Height 3.1 cm
Weight 350 g

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 70 °C
Humidity Range Operating 5 - 95% (non-condensing)
Min Storage Temperature -20 °C
Max Storage Temperature 85 °C

Product Reviews

Ask an Owner

StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

Sorry, customer questions are not available for this product.

Product Discussion

StarTech.com 10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 117.57  inc. vat

£ 97.97 ex. vat

{{#lists}}
  • {{ title }}
  • {{/lists}}