HPE FlexNetwork 5940 2-slot Chassis with 2 Fans 2 Power Supply Bundle
- Switch
- L3
- Managed
- Rack-mountable
Product Description
HPE FlexNetwork 5940 2-slot Chassis with 2 Fans 2 Power Supply Bundle
Ultimate flexibility for an ever-changing Data Center requirements. This entire series is part of the Hewlett Packard Enterprise FlexFabric data center solution,which is a cornerstone of the FlexNetwork architecture.
The FlexFabric 5940 Switch Series is ideally suited for deployment at the aggregation or server access layer of large enterprise data centers,or at the core layer of medium-sized enterprises. With the increase pace of deploying virtualized applications,adopting software-defined networking,and the server-to-server traffic,many data centers now require spine and ToR switch innovations that will meet their requirements. The HPE FlexFabric 5940 is optimized to meet the increasing requirements for higher-performance server connectivity,convergence of Ethernet and storage traffic,the capability to handle virtual environments,and low-latency.
Technical Specification
HPE FlexNetwork 5940 2-slot Chassis with 2 Fans 2 Power Supply Bundle
Expansion / Connectivity |
|
---|---|
Interfaces | 1 x 40Gbit LAN QSFP+ ¦ 1 x serial (console) RJ-45 ¦ 1 x management RJ-45 ¦ 1 x USB 2.0 ¦ 1 x mini-USB 2.0 |
Expansion Slots | 2 (total) / 2 (free) x Expansion Slot |
Installed Modules Qty (Max) | 0 (installed) / 2 (max) |
General |
|
RAM | 4 GB SDRAM |
Device Type | Switch - L3 - Managed - stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | 100 Gigabit Ethernet |
Performance | Latency (10 Gbps): < 1 µs ¦ Throughput: up to 1071 Mpps ¦ Routing/switching capacity: 1440 Gbps |
Capacity | VXLAN tunnels: up to 4000 ¦ VLANs supported: 4096 ¦ IPv4 routing table entries: 128000 ¦ IPv6 routing table entries: 64000 |
MAC Address Table Size | 288K entries |
Jumbo Frame Support | 10000 bytes |
Max Units In A Stack | 9 |
Fibre Channel | FC-BB-5 |
Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, IGMP, VRRP, OSPFv2, PIM-SM, IGMPv3, OSPFv3, static IPv6 routing, ECMP, RIPng, MLDv2, Bidirectional Forwarding Detection (BFD), BGP+ |
Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, CLI, SNMP 4 |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
Features | Flow control, DHCP support, ARP support, port mirroring, Weighted Round Robin (WRR) queuing, SNTP support, Weighted Fair Queuing (WFQ), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Switch Redundancy Protocol (VSRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, LLDP support, Link Aggregation Control Protocol (LACP), Data Center Bridging (DCB), redundant hot swappable fans, Class of Service (CoS), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), Multicast Border Gateway Protocol (MBGP), reverse airflow support, 12.2MB packet buffer, Precision Time Protocol (PTP), FCoE support, RDMA over Converged Ethernet (RoCE), In-Service Software Upgrade (ISSU), FCoE Initialization Protocol (FIP), Shortest Path Bridging (SPB), Explicit Congestion Notification (ECN), Priority-Based Flow Control (PFC), Ethernet Virtual Private Network (EVPN), Network Timing Protocol (NTP), Weighted Deficit Round Robin (WDRR), layer 4 classification |
Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3ag |
Flash Memory | 1 GB |
Miscellaneous |
|
Compliant Standards | CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, ANATEL, UL-AR, EN 60825-1, ANSI C63.4-2003, EN 60825-2, EN 61000-3-2:2006, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, EMC 2004/108/EC, EN 55022 Class A, FCC CFR47 Part 15 A, EN 60950-1/A11, FDA 21 CFR, ANSI/TIA-1057, CAN/CSA-C22.2 No. 60950-1, EN 55024:1998+A1:2001+A2:2003 |
Image Colour Disclaimer | The displayed product image may be a different colour |
Included Accessories | 2 x HPE X711 front (port side) to back (power side) airflow high volume fan tray |
MTBF | 47.2 years |
Power |
|
Voltage Required | AC 120/230 V (50/60 Hz) |
Features | Front-to-rear airflow |
Power Device | Internal power supply - hot-plug |
Installed Qty | 2 (installed) / 2 (max) |
Power Redundancy | Yes |
Power Redundancy Scheme | 1+1 |
Power Provided | 650 Watt |
Dimensions & Weight |
|
Width | 44 cm |
Depth | 66 cm |
Height | 4.42 cm |
Weight | 16 kg |
Environmental Parameters |
|
Min Operating Temperature | 0 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |
Product Reviews
Ask an Owner
HPE FlexNetwork 5940 2-slot Chassis with 2 Fans 2 Power Supply Bundle
Sorry, customer questions are not available for this product.
Product Discussion
HPE FlexNetwork 5940 2-slot Chassis with 2 Fans 2 Power Supply Bundle
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Call for Pricing
Our customers on average save 10% on their networking quotes by speaking to our solutions specialists.