HPE FlexFabric 5940 2-slot 40 Port Managed Switch
- 2 x 40 Gigabit QSFP+ Ports
- 40 Gigabit Ethernet
- Rack-mountable 1U
- L3
Product Description
HPE FlexFabric 5940 2-slot 40 Port Managed Switch
The HPE FlexFabric 5940 Switch Series is a family of high-performance and low-latency 10Gb - E and 40Gb - E top-of-rack (To - R) data center switches. The 5940 Switch includes 100G uplink technology which is part of the HPE FlexFabric data center solution and is a cornerstone of the Flex - Network architecture. The 5940 Switch is suited for deployment at the aggregation or server access layer of large enterprise data centers or at the core layer of medium-sized enterprises. It is optimized for high-performance server connectivity, convergence of Ethernet and storage traffic, and virtual environments.
Technical Specification
HPE FlexFabric 5940 2-slot 40 Port Managed Switch
Miscellaneous |
|
---|---|
Compliant Standards | CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, ANATEL, UL-AR, EN 60825-1, ANSI C63.4-2003, EN 60825-2, EN 61000-3-2:2006, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, EMC 2004/108/EC, EN 300 386 V1.3.3, EN 55022 Class A, FCC CFR47 Part 15 A, EN 60950-1/A11, FDA 21 CFR, CAN/CSA-C22.2 No. 60950-1, EN 55024:1998+A1:2001+A2:2003 |
MTBF | 47.2 years |
Power |
|
Power Device | Internal power supply (not installed) - hot-plug |
Installed Qty | 2 (max) |
Max Supported Qty | 2 |
Power Redundancy | Yes |
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Consumption Operational | 508 Watt |
General |
|
Device Type | Switch - 2 ports - L3 - Managed - stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | 40 Gigabit Ethernet |
Ports | 2 x 40 Gigabit QSFP+ |
Performance | Latency (10 Gbps): < 1 µs ¦ Throughput: 1071 Mpps ¦ Routing/switching capacity: 1440 Gbps |
Capacity | IPv4 routing table entries: 128000 ¦ IPv6 routing table entries: 64000 ¦ MAC address entries: 288000 |
MAC Address Table Size | 288K entries |
Jumbo Frame Support | Yes |
Max Units In A Stack | 9 |
Routing Protocol | OSPF, RIP, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMP, VRRP, OSPFv2, OSPFv3, static IPv6 routing, RIPng, IS-ISv6, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD) |
Remote Management Protocol | SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, SSH, SSH-2, CLI |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
Features | Flow control, DHCP support, ARP support, port mirroring, Weighted Round Robin (WRR) queuing, IPv6 support, SNTP support, Weighted Fair Queuing (WFQ), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), LLDP support, Data Center Bridging (DCB), DHCP protection, Transparent (N_Port ID Virtualization - NPIV) mode support, Registered State Change Notification (RSCN) support, Name Server-based zoning, Strict Priority (SP), Edge Virtual Bridging (EVB), Intelligent Resilient Framework Technology (IRF), redundant fans, reverse airflow support, SNMP support, cut-through, FCoE support, RDMA over Converged Ethernet (RoCE), Virtual Ethernet Port Aggregator (VEPA), In-Service Software Upgrade (ISSU), FCoE Initialization Protocol (FIP), IP source guard, Deficit Round Robin (DRR), VXLAN tunnel endpoints (VTEP) support, ICMP blocking |
Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qaz, IEEE 802.3ag |
RAM | 4 GB SDRAM |
Flash Memory | 1 GB |
Expansion / Connectivity |
|
Interfaces | 2 x 40Gbit LAN QSFP+ ¦ 1 x serial (console) RJ-45 ¦ 1 x management (LAN) RJ-45 ¦ 1 x USB 2.0 ¦ 1 x mini-USB 2.0 |
Expansion Slots | 2 (total) / 2 (free) x Expansion Slot |
Installed Modules Qty (Max) | 0 (installed) / 2 (max) |
Dimensions & Weight |
|
Width | 44 cm |
Depth | 66 cm |
Height | 4.42 cm |
Weight | 16 kg |
Environmental Parameters |
|
Min Operating Temperature | 0 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |
Product Reviews
Ask an Owner
HPE FlexFabric 5940 2-slot 40 Port Managed Switch
Sorry, customer questions are not available for this product.
Product Discussion
HPE FlexFabric 5940 2-slot 40 Port Managed Switch
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Call for Pricing
Our customers on average save 10% on their networking quotes by speaking to our solutions specialists.