Free delivery*

£ 169.98  inc. vat

£ 141.65 ex. vat

In Stock

Order within for delivery on Monday, 20th August

Click & Collect Unavailable

Paypal Credit Finance from £15.26 a month.
(14.9% APR) representative

Zyxel NWA1123-ACHD-EU0101F 802.11ac Wave 2 Standalone Access Point

  • Excellent wireless coverage and performance with the latest 3x3 Wave 2 802.11ac...
  • Next generation beamforming technology delivers maximum coverage

View full description

QuickFind: 818362

Mfr part code: NWA1123-ACHD-EU0101F

{{#lists}}
  • {{ title }}
  • {{/lists}}

    Zyxel NWA1123-ACHD-EU0101F 802.11ac Wave 2 Standalone Access Point Product Description

    The Zyxel NWA1123-AC HD is a Wave 2 dual-radio 3x3 MU-MIMO Standalone Access Point with a combined data rate of up to 1.6Gbps. Thanks to its superior hardware design with next generation beamforming technology and advanced noise suppression, the NWA1123-AC HD delivers increased coverage and improved connection speeds for every client. The high- performance NWA1123-AC HD provides fast, reliable wireless experience that makes itself a favorable, cost-effective solution for high-density WiFi deployments.

    Stepping up from 802.11ac, the Wave 2 technology introduces Multi-User MIMO (MU-MIMO). This is an important WiFi development that enables an AP to communicate with multiple clients at a time offering up to 300% performance for a 3x3 AP. The benefits of Wave 2 technology are clear, but there are still two well-known technical challenges: the airtime cost when performing channel measurement, and the data rate being limited by the slowest client in the MU group.

    To overcome those challenges, the NWA1123-AC HD uses second generation transmit beamforming technology incorporating Low End Sensitivity Improvements and Time Domain Channel Smoothing allowing data rates to increase for not only MU-MIMO clients, but for all existing ones as well. Additionally, the NWA1123-AC HD is built with a high-efficiency antenna module, premium power amplifiers and low-noise elements delivering superior wireless performance over other Wave 2 access points on the market.

    Technical Specifications

    Miscellaneous

    Compliant Standards EN 61000-3-2, EN 61000-3-3, EN55024, FCC Part 15 B, FCC Part 15 C, IEC 60950-1, EN 60950-1, FCC Part 15 E, BSMI CNS 13438, EN 60601-1-2, EN 300 328, BSMI CNS 14336-1, EN 301489-17, EN 301 489-1, LP0002, EN 301 893, EN 55032
    Included Accessories Mounting screws, wall/ceiling mounting plate
    MTBF 1,306,790 hours

    General

    Device Type Radio access point
    Width 21.1 cm
    Depth 22.3 cm
    Height 3.9 cm
    Weight 750 g
    Localisation Europe

    Networking

    Form Factor Wall / ceiling mountable
    Connectivity Technology Wireless
    Data Transfer Rate 1300 Mbps
    Line Coding Format DBPSK, DQPSK, CCK, 64 QAM, 256 QAM, BPSK, QPSK, 16 QAM
    Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
    Remote Management Protocol SNMP 3, SNMP 2c, CLI
    Frequency Band 2.4 GHz, 5 GHz
    Capacity Maximum number of configured SSIDs: 16
    Features VLAN support, DiffServ support, manageable, MAC address filtering, IPv6 support, firmware upgradable, Wi-Fi Multimedia (WMM) support, Multiple SSID support, 2T2R MIMO technology, Maximum Ratio Combining (MRC), 3T3R MIMO technology, Low Density Parity Check (LDPC), rogue access point detection, DHCP client, Cyclic Delay Diversity (CDD), Maximum Likelihood Demodulation (MLD), security lock slot (cable lock sold separately), ZyXEL One Network (ZON), MU-MIMO technology, Unscheduled Automatic Power Save Delivery (U-APSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, SU-MIMO technology, Smart Connect, low end sensitivity improvements (LESI), time domain channel smoothing, Layer 2 isolation
    Encryption Algorithm TLS, PEAP, TTLS, WPA, WPA2, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, WEP, EAP-SIM, EAP-AKA
    Authentication Method RADIUS, Radio Service Set ID (SSID), Extensible Authentication Protocol (EAP), EAP-FAST
    Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az, IEEE 802.11ac, IEEE 802.11ac Wave 2, IEEE 802.3au, IEEE 802.11ab

    Aerial

    Antenna Internal
    Gain Level 3 dBi

    Expansion / Connectivity

    Interfaces 2 x 1000Base-T (PoE+) - RJ-45 ¦ 1 x console

    Power

    Power Over Ethernet (PoE) Supported PoE+
    Power Device External power adapter
    Voltage Required AC 120/230 V (50/60 Hz)

    Dimensions & Weight (Shipping)

    Shipping Width 26.6 cm
    Shipping Depth 26.8 cm
    Shipping Height 5.6 cm
    Shipping Weight 1.09 kg

    Environmental Parameters

    Min Operating Temperature -20 °C
    Max Operating Temperature 50 °C
    Humidity Range Operating 10 - 90% (non-condensing)

    Zyxel NWA1123-ACHD-EU0101F 802.11ac Wave 2 Standalone Access Point Ask an owner

    Zyxel NWA1123-ACHD-EU0101F 802.11ac Wave 2 Standalone Access Point Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.