DrayTek Vigor AP-810 Wireless Access Point

£ 99.99  inc. vat

£ 83.32 ex. vat

DrayTek Vigor AP-810 Wireless Access Point

QuickFind: 869212 Mfr part code: AP810-K
  • Business-class 802.11n WLAN access point
  • 2.4GHz 802.11n 300Mbps Wireless LAN
  • Dual isolated LAN interfaces
  • 4-Port Ethernet Switch
  • Wireless Encryption : WEP, WPA, WPA2

Product Description

DrayTek Vigor AP-810 Wireless Access Point

The DrayTek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system.  The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform.

Wireless Security

The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.

For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.

The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data/devices. 

USB Printer Port

The AP-810 has a USB interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-810, or a PC anywhere else on the network to whick the AP-810 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-810s to make a bridge.

WMM - WiFi Multimedia

The AP-810 implements intelligent wireless traffic prioritization for the most efficient management of wireless traffic by using the Wi-Fi Multimedia standard (WMM). WMM defines Quality of Service (QoS) in Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS standard, intended to improve timing critical applications such as audio, video and voice applications over WiFi. WMM adds prioritized capabilities to Wi-Fi networks and optimizes their performance when multiple concurrent applications, each with different latency and throughput requirements, compete for network resources.

WPS - WiFi Protected Setup

Wireless Security (encryption) is important to protect your data (privacy) but also to prevent unauthorised people from accessing your network or your Internet connection. The WPS system means that instead of having to create and enter long encryption keys, you can activate WPS registration. To activate, you press and hold the WPS button, then activate the WPS function on your PC; the two devices then automatically exchange encryption keys. For security, WPS an be disabled if the AP-810 is physically accessible.

The same button on the AP-810 also serves as a physical on/off switch for the Wireless LAN if you wish to quickly disable it at any time, whilst still leaving your wired ports active.

Technical Specification

DrayTek Vigor AP-810 Wireless Access Point

General

Device Type Radio access point
Width 11.2 cm
Depth 4.2 cm
Height 13.2 cm
Weight 255 g
Localisation United Kingdom, Ireland

Networking

Form Factor External
Connectivity Technology Wireless
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Remote Management Protocol Telnet, HTTP, HTTPS, CLI, TR-069
Frequency Band 2.4 GHz
Features Power over Ethernet (PoE), Syslog support, print server, Wireless Distribution System (WDS) support, firmware upgradable, MIMO technology, wall mountable, Wi-Fi Multimedia (WMM) support, Wi-Fi Protected Setup (WPS), DHCP server, Multiple SSID support, DHCP client
Encryption Algorithm 128-bit WEP, 64-bit WEP, TLS, PEAP, WPA, WPA2
Authentication Method RADIUS
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n

Aerial

Antenna External detachable
Antenna Qty 2

Expansion / Connectivity

Interfaces 4 x 100Base-TX - RJ-45 ¦ 1 x 100Base-TX (PoE) - RJ-45 ¦ 1 x USB 2.0 - Type A

Miscellaneous

Compliant Standards FCC

Power

Power Device External power adapter
Power Consumption Operational 10 Watt

Manufacturer Warranty

Service & Support Limited warranty - 2 years

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 - 90% (non-condensing)

Product Reviews

Ask an Owner

DrayTek Vigor AP-810 Wireless Access Point

Sorry, customer questions are not available for this product.

Product Discussion

DrayTek Vigor AP-810 Wireless Access Point

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

£ 99.99  inc. vat

£ 83.32 ex. vat

0% Interest offers available learn more
{{#lists}}
  • {{ title }}
  • {{/lists}}