Eaton 9SX 9SX1000I - 900 Watt - 1000 VA UPS

QuickFind: 870603 Mfr part code: 9SX1000I
  • UPS
  • Power Capacity: 900 Watt / 1000 VA
  • Networking: RS-232,USB
  • True online double-conversion technology

Product Description

Eaton 9SX 9SX1000I - 900 Watt - 1000 VA UPS

The Eaton 9SX uninterruptible power system (UPS) protects your sensitive electronic equipment from the most common power problems,including power failures,power sags,power surges,brownouts,line noise,high voltage spikes,frequency variations,switching transients,and harmonic distortion. Power outages can occur when you least expect it and power quality can be erratic. These power problems have the potential to corrupt critical data,destroy unsaved work sessions,and damage hardware - causing hours of lost productivity and expensive repairs.


  • True online double-conversion technology with high power density, utility frequency independence, and generator compatibility
  • ABM technology that uses advanced battery management to increase battery service life, optimize recharge time, and provide a warning before the end of useful battery life
  • Selectable high efficiency mode of operation
  • Firmware that is easily upgradable without a service call
  • Remote on/off control through Remote On/Off (ROO) and Remote Power Off (RPO) ports

Technical Specification

Eaton 9SX 9SX1000I - 900 Watt - 1000 VA UPS


Device Type UPS - Power Factor Correction (PFC) - external

Power Device

UPS Technology On-line
Input Voltage AC 200/208/220/230/240 V
Input Voltage Range AC 120 - 276 V
Frequency Provided 50/60 Hz
Frequency Required 40 - 70 Hz
Input Connectors 1 x power IEC 60320 C14 10A
Power Output Connectors Details 6 x power IEC 60320 C13 10A
Output Voltage AC 200/208/220/230/240 V 50/60 Hz
Power Capacity 900 Watt / 1000 VA
Power Factor (PF) 0.9


Type Expandable
Run Time (Up To) 14 min at 500 Watts


Remote Management Interface RS-232, USB

Expansion / Connectivity

Interfaces 1 x management (RS-232) - 9 pin D-Sub (DB-9) ¦ 1 x management (USB) - 4 pin USB Type B ¦ EPO (emergency power off) - mini terminal block ¦ Relay output - mini terminal block
Expansion Slots 1 (total) / 1 (free) x Expansion Slot


Features Advance Battery Management (ABM), LCD display, deep discharge protection, automatic self-test, temperature-compensated battery charging, 3-stage charging, double conversion, power measuring
Compliant Standards FCC Class B certified, TUV, CISPR 22 Class B, UL 1778, CB, IEC 62040-3, CSA C22.2, IEC 62040-2, KCC, cULus, EN 62040-2, EAC, RCM, EN 62040-3, IEC 62040-1, EN 62040-1, BIS

Manufacturer Warranty

Service & Support Limited warranty - 2 years

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Sound Emission 41 dB

Dimensions & Weight

Width 16 cm
Depth 38.7 cm
Height 25.2 cm
Weight 14.8 kg

Product Reviews

Ask an Owner

Eaton 9SX 9SX1000I - 900 Watt - 1000 VA UPS

Sorry, customer questions are not available for this product.

Product Discussion

Eaton 9SX 9SX1000I - 900 Watt - 1000 VA UPS

Our comments box is a great way for you to view other people's feedback about products on, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Sorry, this product is currently out of stock.

Enter your email address below if you would like to be informed when this product is back in stock.

By entering your email address here you are agreeing that you would like to be notified when this product is back in stock and you have read and agree to our privacy policy