Sorry, this product is currently out of stock

Enter your email address below if you would like to be informed when this product is back in stock.

HyperX 4GB 2666MHz DDR4 Non-ECC CL15 1.2V DIMM Memory

  • DDR4
  • 2666MHz
  • 4GB
  • 1.2V

View full description

QuickFind: 720291

Mfr part code: HX426C15FB/4

  • {{ title }}
  • {{/lists}}

    HyperX 4GB 2666MHz DDR4 Non-ECC CL15 1.2V DIMM Memory Product Description

    HyperX HX426C15FB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.
    Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V.

    - CL(IDD) 15 cycles
    - Row Cycle Time (tRCmin) 45ns(min.)
    - Refresh to Active/Refresh Command Time (tRFCmin) 260ns(min.)
    - Row Active Time (tRASmin) 26.25ns(min.)
    - UL Rating 94 V - 0
    - Operating Temperature 0 oC to +85 oC
    - Storage Temperature -55 oC to +100 oC

    - Power Supply: VDD = 1.2V Typical
    - VDDQ = 1.2V Typical
    - VPP - 2.5V Typical
    - VDDSPD = 2.2V to 3.6V
    - Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    - Low-power auto self refresh (LPASR)
    - Data bus inversion (DBI) for data bus
    - On-die VREFDQ generation and calibration
    - Single-rank
    - On-board I2 serial presence-detect (SPD) EEPROM
    - 16 internal banks; 4 groups of 4 banks each
    - Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    - Selectable BC4 or BL8 on-the-fly (OTF)
    - Fly-by topology
    - Terminated control command and address bus
    - Height 1.340" (34.04mm), w/heatsink

    HyperX 4GB 2666MHz DDR4 Non-ECC CL15 1.2V DIMM Memory Product Reviews

    Technical Specifications


    Capacity 4 GB
    Upgrade Type Generic


    Type DRAM
    Technology DDR4 SDRAM
    Form Factor DIMM 288-pin
    Module Height (inch) 1.34
    Speed 2666 MHz ( PC4-21300 )
    Latency Timings CL15 ( 15-17-17 )
    Data Integrity Check Non-ECC
    Features Single rank, black heatsink, On-Die Termination (ODT), Black PCB, low profile heat spreader, FURY asymmetric heatspreader, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0) , unbuffered
    Module Configuration 512 x 64
    Chips Organization 512 x 8
    Voltage 1.2 V
    RAM Performance SPD - 2133 MHz - 1.2 V - CL12 - 12-14-14 ¦ SPD - 2400 MHz - 1.2 V - CL14 - 14-16-16 ¦ SPD - 2666 MHz - 1.2 V - CL15 - 15-17-17 ¦ Intel Extreme Memory Profiles (XMP 2.0) - 2666 MHz - 1.2 V - CL15 - 15-17-17


    Colour Category Black

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    Customer Questions

    HyperX 4GB 2666MHz DDR4 Non-ECC CL15 1.2V DIMM Memory Ask an owner

    HyperX 4GB 2666MHz DDR4 Non-ECC CL15 1.2V DIMM Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.