£94.98 inc. vat

£79.15 ex. vat

In Stock

Click & Collect Unavailable

HyperX Impact 16GB Kit (2x8GB) DDR4 2133MHz SODIMM Memory

  • 16GB memory (2x8GB)
  • DDR4 2133MHz
  • 1.35V

View full description

QuickFind: 722619

Mfr part code: HX421S13IBK2/16

{{#lists}}
  • {{ title }}
  • {{/lists}}

    HyperX Impact 16GB Kit (2x8GB) DDR4 2133MHz SODIMM Memory Product Description

    HyperX Impact 16GB Kit (2x8GB) DDR4 2133MHz SODIMM Memory

    DESCRIPTION HyperX HX421S13IBK2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2133 CL13 SDRAM (Synchronous DRAM) 2Rx8, memory modules, based on sixteen 512M x 8-bit DDR4 FBGA components. Total kit capacity is 16GB. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2133 at a low latency timing of 13-13-13 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

    The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.

    PnP JEDEC TIMING PARAMETERS:
    JEDEC/PnP: DDR4-2133 CL13-13-13 @1.2V
    XMP Profile #1: DDR4-2133 CL13-13-13 @1.2V

    SPECIFICATIONS
    CL(IDD) 13 cycles
    Row Cycle Time (tRCmin) 46.5ns (min.)
    Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.)
    Row Active Time (tRASmin) 33ns (min.)
    Maximum Operating Power TBD W*
    UL Rating 94 V - 0
    Operating Temperature 0°C to 85°C
    Storage Temperature -55°C to +100°C
    *Power will vary depending on the SDRAM used.

    FEATURES
    Power Supply: VDD = 1.2V Typical
    VDDQ = 1.2V Typical
    VPP - 2.5V Typical
    VDDSPD = 2.25V to 3.6V
    On-Die termination (ODT)
    16 internal banks; 4 groups of 4 banks each
    Bi-Directional Differential Data Strobe
    8 bit pre-fetch
    Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
    Height 1.18" (30.00mm)

    HyperX Impact 16GB Kit (2x8GB) DDR4 2133MHz SODIMM Memory Product Reviews

    Technical Specifications

    General

    Capacity 16 GB : 2 x 8 GB
    Upgrade Type Generic

    Memory

    Type DRAM
    Technology DDR4 SDRAM
    Form Factor SO-DIMM 260-pin
    Module Height (inch) 1.18
    Speed 2133 MHz ( PC4-17000 )
    Latency Timings CL13 ( 13-13-13 )
    Data Integrity Check Non-ECC
    Features Dual rank, On-Die Termination (ODT), dual channel, Black PCB, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0) , unbuffered
    Module Configuration 1024 x 64
    Chips Organization 512 x 8
    Voltage 1.2 V

    Miscellaneous

    Colour Category Black

    Manufacturer Warranty

    Service & Support Limited lifetime warranty ( Russia - 10 years )

    Customer Questions

    HyperX Impact 16GB Kit (2x8GB) DDR4 2133MHz SODIMM Memory Ask an owner

    HyperX Impact 16GB Kit (2x8GB) DDR4 2133MHz SODIMM Memory Product Discussion

    Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

    • This tool is open to everyone.
    • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
    • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.