- Components
- Memory - PC
- DDR2. 1066MHz
- Product Details
- quickfind code: 148859
- manufacturer #: KHX8500D2K2/4G
Buying Information
33 in stock for next day delivery
Wednesday, 17th March
Overview
Product Description
Kingston 4GB (2x2GB) DDR2 1066MHz/PC2-8500 HyperX Memory CL5 Unbuffered Non-ECCIt's Here - HyperX DDR2 memory, the next-generation evolution of DDR memory technology. Like all Kingston HyperX products, HyperX DDR2 modules were specifically engineered and designed to meet the rigorous requirements of PC enthusiasts. HyperX DDR2 offers faster speeds, lower latencies, higher data bandwidths and lower power consumption. HyperX is available in single and dual channel memory kits.
Specification
Product Specifications
General | |
|---|---|
| Storage Capacity | 4 GB ( 2 x 2 GB ) |
| Upgrade Type | Generic |
Memory | |
| Type | DRAM |
| Technology | DDR2 SDRAM |
| Form Factor | DIMM 240-pin |
| Memory Speed | 1066 MHz ( PC2-8500 ) |
| Latency Timings | CL5 ( 5-5-5-15 ) |
| Data Integrity Check | Non-ECC |
| RAM Features | Unbuffered |
| Module Configuration | 256 x 64 |
| Supply Voltage | 2.2 V |
| Lead Plating | Gold |
Expansion / Connectivity | |
| Compatible Slots | 2 x memory - DIMM 240-pin |
Manufacturer Warranty | |
| Service & Support | Limited lifetime warranty ( Germany, Austria and France - 10 years ) |
Product Reviews
Ebuyer.com customer reviews give you the chance to give your opinion on the latest technology products. See what customers had to say about this product below. To view more reviews or write your own review, use either of the buttons below.
Good, fast memory...
operating system:
Other...as long as you're familiar with your BIOS. The SPD on these modules is programmed with the settings for 1.8V operation, at which settings it will run at PC2-6400 speed. It needs 2.2V VDIMM, the tRA/tRD/tRAS lowering to 15 (from 18 in the SPD) and DIMM clock raising manually to run at PC2-8500 spec. This is not to be taken as a criticism, just be aware that this needs special care when wanting to run at PC2-8500 spec.
Also, Phenom AM2+ processors (I suspect this includes the Kuma (Athlon X2 7750+ BE) core, but don't quote me on this - this IS a processor limitation as the memory controller is embedded in AMD parts) can only handle one 1066 DIMM per channel; this means if you have a board with 4 slots and an 8GB limit, you'll only be able to use the two slots that give you ganged 128bit mode. It'll refuse to boot if you put them both on the same 64 bit controller of try to install 4 modules. In summary, at PC2-8500, limit of two modules maximum, one on each 64bit channel.
OS is FreeBSD7-STABLE amd64 (currently ID'd as 7.2-PRERELEASE) and this works on the Asus M3A78 Pro with a Phenom 9950BE.
Datasheet for those who like to set all timing parameters here:
http://www.valueram.com/datasheets/KHX8500D2K2_4G.pdf
Excellent Value For The Price
operating system:
Windows XPI ordered these on monday for a thursday deliver but they arrived a day early (thanks ebuyer).
Got mine at stock speeds at 2.1v I'm using a AMD 9550 Quad Core CPU, Gigabyte GA-MA78G DS3H AM2+ board. I'm running it also in unganged mode 64bit per channel as give better performance so what I've read on my local computer forums.
I say I'm running XP 32bit thats because I had some OCZ Reaper 2GB DDR2 but sold it and left the op system on. If it wasn't for a huge project I have to do this weekend I would be installing the release candiate of Windows 7 64bit which I will next week via dual boot.
Good Good
operating system:
Windows VistaBought these sticks to run along side a Intel Quad core Q6600. They really do the job some people don't quite understand that speed is important this RAM comes with the ability to go as high as 1066MHz but when you install them the BIOS will set them to 800MHz so you have to change that in your BIOS.
To make people understand better like I have said above these sticks can run at 1066MHz and my Proccessor can also run at 1066MHz. They liked to be coupled so you can get the best results in performance. I have seen this happen with people but they buy an awesome processor that has a FSB 1333 and then buy RAM that runs at 800MHz now these two components like to run side by side but with these two it means you are wasting performance and losing money because of it so when it comes to purchasing RAM or Processors make sure you can get them to run along side each other.
E.g Intel Quad Core Q6600 runs at 1066MHz
Kingston 2X2GB of RAM runs at 1066 Mhz these will run in harmony together.
Thanks Ebuyer
Sorted & no more BSOD
i have sorted the problem i had with my 8gb hyperx ddr2 1066mhz(from ebuyer).
system is now 100% stable & here are the system settings:
Q6600 430mhz x 8 @ 1.36v
8gb kingston hyperx overclocked to 1070mhz 5-5-5-15 @ 2.05v
mch core 1.28v
ich i/o 1.57v
Memory Speed:
READ: 7719 MB/s
WRITE: 7745MB/s
COPY: 8191MB/s
LATENCY: 70.1ns
Memory Bus: 537.5 MHZ
Great Memory & Very Easy To OverClock you just need to Do it Right. : )
Spot on
operating system:
LinuxGot some of this on Saturday for a new build PC - confirmed you DO NEED TO change the voltage and speed manually to get the 1066Mhz
other than that cant fault it!
Magnifico
operating system:
Windows Vista7.4 on the Windows 7 experience index. I loved them so much I ordered another pair.
ebuyer gets 5 stars. first class+ service.
nice piece of kit.
operating system:
Windows VistaAfter a rocky start with delivery and quicky sorted out by excellent customer services, i have just recieved and fitted these.
At first i felt like framing them as they look and felt that good, nice and weighty with a quality assurance feel to them.
These have gone on my system as 5-5-5-18 @ 800mhz so at some point will bother to try to get to the 5-5-5-15 @ 1066 through the bios. Although i do read that there's not that much difference in the 2 settings.
A must buy @ a proper bargain and lifetime guarantee from kingston.
It's amazing
I custom built for first time.. and used this ram, bought for £30 now I regret not buing another one! :( I hope price dropps soon.
Cracking Memory, fast & reliable
operating system:
Windows XPGreat memeory, I just purchased this and a revision 2.0 gigabyte MA770-UD3 motherboard and it works perfectly out of the box. I set the spd to 4-4-4-12 at 900mhz @ 2.2v. I only have a x2 6000+ so no native 1066 support and a lower spd is better for games than 1066 on the memory.
I also did 1066 5-5-5-15 @ 2.2v with ease. It also explains in the booklet how to set the spd in the bios and on their website too. Overall a great buy and i would highly recommend to anyone.
Good but fiddly
operating system:
Windows VistaOk so i'v had this abit over a week, thanks to ebuyer's amazing delivery service.
Come's @800mhz stock, to reach 1066mhz only 2 options in your bios will need to be alterd.
DramV [ram voltage] from 1.8v to 2.2v, also you will need to change the multi from 4x800mhz to 5x1066mhz, on an asus board like mine you will need to set it from 3x667 to 1066mhz @5x
In simple text for those of you a little less in the know.
"Change voltage to 2.2volts, and your memory multi to 5x for 1066 mode [may say 1067]".
For people wanting a little more, drop 2.2v on to them, 5-5-5-15-24-2t, bring the ram up to specs.
2.1v and timing of 4-4-4-12-24 will give you 990mhz in 800 mode, making this ram stupidly fast for overclocked systems.
My opinion and over all conclusion....
If you know what your doing, this is bang for your buck right here, if not take a look at some corsair xms2's [abit easyer to use]. They oc like dominators if you know how. Price is great and the only way of getting beter is ddr3 and a million pound lol.
1 star taken as these were for another rig and wanted to just plug and play.
Well deserves all 5 in an overclockers rig, maybe only 3 in a standed user pc.
5 on ebuyer delivery as per usual.
4.5 on memory [refere to the above]
-Wolfy
Product Discussion
Join in with the Ebuyer product discussions today to ask questions, exchange stories and share opinions with other Ebuyer customers who have bought this product.


15 reviews



















