Here are some alternatives
APC Smart-UPS C 900 Watt/1500VA 2U Rack mountable LCD 230V
QuickFind: 539647
Mfr part code: SMC1500I-2U
- For UPS advice email [email protected]
- Power Capacity: 900 Watt / 1500 VA
- Nominal Output Voltage: 230V
Product Description
APC Smart-UPS C 900 Watt/1500VA 2U Rack mountable LCD 230V
For the replacement battery please see Quick find 486884.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Pure sine wave output on battery
Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
LCD status display
Provides key UPS status at a glance. LCD status display has multiple status indicators with load and battery bar graphs.
Cold-start capable
Provides temporary battery power when the utility power is out.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management
Maximizes battery performance,life,and reliability through intelligent,precision charging.
Power conditioning
Protects connected loads from surges,spikes,lightning,and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Network manageable
Provides remote power management of the UPS over the network.
Audible alarms
Actively let you know if the unit is on battery,if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensure clean,uninterrupted power to protected equipment while batteries are being replaced.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enable a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Adjustable voltage-transfer points
Maximize useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Pure sine wave output on battery
Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
LCD status display
Provides key UPS status at a glance. LCD status display has multiple status indicators with load and battery bar graphs.
Cold-start capable
Provides temporary battery power when the utility power is out.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management
Maximizes battery performance,life,and reliability through intelligent,precision charging.
Power conditioning
Protects connected loads from surges,spikes,lightning,and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Network manageable
Provides remote power management of the UPS over the network.
Audible alarms
Actively let you know if the unit is on battery,if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensure clean,uninterrupted power to protected equipment while batteries are being replaced.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enable a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Adjustable voltage-transfer points
Maximize useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Technical Specification
APC Smart-UPS C 900 Watt/1500VA 2U Rack mountable LCD 230V
Power Device |
|
---|---|
Input Connector(s) | 1 |
Output Voltage | AC 230 V ± 5% - 57 - 63 Hz |
Power Output Connectors Details | 4 x power IEC 60320 C13 |
UPS Technology | Line interactive |
Input Voltage | AC 230 V |
Input Voltage Range | AC 180 - 287 V |
Input Voltage Range (Adjustable) | AC 170 - 300 V |
Frequency Provided | 57 - 63 Hz |
Frequency Required | 50/60 Hz |
Input Connectors | 1 |
Power Capacity | 900 Watt / 1500 VA |
Output Waveform | Sinewave |
Surge Suppression | Yes |
Surge Energy Rating | 459 Joules |
Circuit Protection | Circuit breaker |
Manufacturer Warranty |
|
Service & Support | Limited warranty - parts and labour - 2 years |
Service & Support Details | Limited warranty - parts and labour - 2 years |
Expansion / Connectivity |
|
Interfaces | 1 x management (USB) - 4 pin USB Type B |
Miscellaneous |
|
Cables Included | Power cable ¦ USB cable - external |
Rack Mounting Kit | Included |
Features | Audible alarm, LCD display, Automatic Voltage Regulation (AVR), cold-start function, automatic shut down reset, automatic self-test, hot-swappable batteries |
Compliant Standards | C-Tick, GOST, UL 1449, VDE, RoHS, REACH |
General |
|
Device Type | UPS - rack-mountable |
Battery Enclosure Type | Internal |
Height (Rack Units) | 2U |
Colour | Black |
Battery |
|
Quantity | 1 |
Technology | Lead Acid |
Run Time (Up To) | 31 min at half load ¦ 9 min at full load |
Recharge Time | 3 hours |
Networking |
|
Remote Management Interface | USB |
Software / System Requirements |
|
Software Included | Drivers & Utilities |
Environmental Parameters |
|
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 0 - 95% |
Sound Emission | 46 dBA |
Dimensions & Weight |
|
Width | 43.2 cm |
Depth | 45.7 cm |
Height | 8.9 cm |
Weight | 28.64 kg |
Dimensions & Weight (Shipping) |
|
Shipping Width | 59.4 cm |
Shipping Depth | 60.3 cm |
Shipping Height | 25.1 cm |
Shipping Weight | 31.91 kg |
Product Reviews
Product Discussion
APC Smart-UPS C 900 Watt/1500VA 2U Rack mountable LCD 230V
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Add-ons and Accessories
AP8858 PDU
APC Rack PDU 2G, Metered, ZeroU, 20A/208V, 16A/230V, (18) C13 & (2) C19
£699.99 inc. vat
£583.32 ex. vat
£583.32 ex. vat