Cisco Catalyst 3560CX-12PD-S Managed Switch
QuickFind: 700388
SKU: WS-C3560CX-12PD-S
- Networking Product Advice:
- 01430 433 671 or [email protected]
- Switch
- Managed
- 12 Ports
Product Description
Cisco Catalyst 3560CX-12PD-S Managed Switch
Embrace amazing IoT possibilities with PoE
The Cisco Catalyst 3560-CX switches enable you to bring sensors,LED lights,building controllers,and other IoT devices onto the network using Power over Ethernet (PoE). The many features and controls offered by these PoE switches make them run more efficiently and reliably. For example,Cisco Perpetual PoE continues powering endpoints even during a switch boot,maximizing uptime. So there's no need for backup power. The switches provide up to 240 watts of power for PoE devices - twice the capacity of current switches.
Security and operational simplicity
For simplified management,these switches have the option to run in Cisco Instant Access mode. Instant Access provides a single point of operation and management for your campus networks. And they support Cisco Plug and Play (PnP) technology,which automates network device deployments.
Main Specifications
- Product Description: Cisco Catalyst 3560CX-12PD-S - switch - 12 ports - Managed - desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch - 12 ports - Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 12 x 10/ 100/ 1000 (PoE+) + 2 x combo SFP+
- Power Over Ethernet (PoE): PoE+
- PoE Budget: 240W
- Performance: Forwarding performance:34 Gbps Forwarding performance (64-byte packet size):50.6 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
- Features: BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Power: AC 120/ 230 V ( 50/ 60 Hz )
- Dimensions: (WxDxH) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.31kg
- Manufacturer Warranty: Limited lifetime warranty
The Cisco Catalyst 3560-CX switches enable you to bring sensors,LED lights,building controllers,and other IoT devices onto the network using Power over Ethernet (PoE). The many features and controls offered by these PoE switches make them run more efficiently and reliably. For example,Cisco Perpetual PoE continues powering endpoints even during a switch boot,maximizing uptime. So there's no need for backup power. The switches provide up to 240 watts of power for PoE devices - twice the capacity of current switches.
Security and operational simplicity
For simplified management,these switches have the option to run in Cisco Instant Access mode. Instant Access provides a single point of operation and management for your campus networks. And they support Cisco Plug and Play (PnP) technology,which automates network device deployments.
Main Specifications
- Product Description: Cisco Catalyst 3560CX-12PD-S - switch - 12 ports - Managed - desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch - 12 ports - Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 12 x 10/ 100/ 1000 (PoE+) + 2 x combo SFP+
- Power Over Ethernet (PoE): PoE+
- PoE Budget: 240W
- Performance: Forwarding performance:34 Gbps Forwarding performance (64-byte packet size):50.6 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
- Features: BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Power: AC 120/ 230 V ( 50/ 60 Hz )
- Dimensions: (WxDxH) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.31kg
- Manufacturer Warranty: Limited lifetime warranty
Technical Specification
Cisco Catalyst 3560CX-12PD-S Managed Switch
General |
|
---|---|
Enclosure Type | Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U |
Performance | Forwarding performance: 34 Gbps ¦ Forwarding performance (64-byte packet size): 50.6 Mpps |
Capacity | Virtual interfaces (VLANs): 1023 |
Status Indicators | Port status, port transmission speed, port duplex mode, system, link/activity |
Ports | 12 x 10/100/1000 (PoE+) + 2 x combo SFP+ |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 240 W |
Jumbo Frame Support | 9018 bytes |
Routing Protocol | RIP-1, RIP-2, static IP routing |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI |
Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Features | BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Weighted Tail Drop (WTD) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az |
RAM | 512 MB |
Flash Memory | 128 MB |
Device Type | Switch - 12 ports - Managed |
Subtype | Gigabit Ethernet |
Manufacturer Warranty |
|
Service & Support | Limited warranty - advance parts replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days |
Service & Support Details | Limited warranty - advance parts replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days |
Power |
|
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Device | Internal power supply |
Power Provided | 300 Watt |
Power Consumption Operational | 28.2 Watt |
80 PLUS Certification | 80 PLUS Silver |
Expansion / Connectivity |
|
Interfaces | 12 x 1000Base-T RJ-45 PoE+ - 30 W ¦ 1 x console RJ-45 ¦ 1 x mini-USB Type B management ¦ 1 x USB Type A ¦ 2 x 1000Base-T RJ-45 uplink ¦ 2 x SFP+ uplink |
Miscellaneous |
|
Compliant Standards | GOST, CISPR 24, EN55022, EN55024, CISPR 22, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, GB 4943, KCC Class A, IEC 60825, KN22, KN24, VCCI V-3/2007.04 Class A, AS/NZS CISPR22:2004 Class A, CAN/CSA-C22.2 No. 60950-1 |
Rack Mounting Kit | Optional |
MTBF | 528,480 hours |
Software / System Requirements |
|
Software Included | Cisco IOS IP Base |
Dimensions & Weight |
|
Width | 26.9 cm |
Depth | 23.8 cm |
Height | 4.44 cm |
Weight | 2.31 kg |
Environmental Parameters |
|
Min Operating Temperature | -5 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 5 - 95% (non-condensing) |
Min Storage Temperature | -25 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 5 - 95% (non-condensing) |
Product Reviews
Product Discussion
Cisco Catalyst 3560CX-12PD-S Managed Switch
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Add-ons and Accessories
Access Points
HPE Aruba Instant ON AP22 (RW) - Radio Access Point
£104.99 inc.
vat
WAS £123.05SAVE £18.06 £87.49 ex.
vat
WAS £102.54SAVE £15.05
vat
WAS £123.05SAVE £18.06 £87.49 ex.
vat
WAS £102.54SAVE £15.05
TP-Link AC1750 EAP265 HD - Wireless Gigabit Ceiling Mount PoE Access Point
£110.00 inc.
vat
£91.66 ex.
vat
vat
£91.66 ex.
vat
TP-Link EAP660 HD - AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point
£224.50 inc.
vat
£187.08 ex.
vat
vat
£187.08 ex.
vat
TP-Link EAP230-WALL - Omada AC1200 Wireless MU-MIMO Gigabit Wall-Plate Access Point
£75.99 inc.
vat
£63.32 ex.
vat
vat
£63.32 ex.
vat