HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

Finance from £12.48 a month. (14.9% APR) representative.

£ 138.99  inc. vat

£ 115.82 ex. vat

HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

QuickFind: 743587 Mfr part code: HX421C14FB2K2/16
  • 16GB Kit (2X8GB)
  • Form Factor DIMM
  • DDR4-2133

Product Description

HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

Plug and play

Get the speed you want, hassle free. HyperX FURY DDR4 is the first product line to offer automatic overclocking up to the highest frequency published.

Optimised for Intel's 200 Series and X99 chipsets

HyperX FURY DDR4 memory is 100% tested and optimised for compatibility and easy overclocking. To complete a motherboard featuring 200 Series or X99 chipsets, you need the latest generation of DRAM technology - DDR4 memory.

Low power consumption

DDR4's lower power requirements mean less heat and higher reliability. Low 1.2 volts draw less power from your system, which results in a cooler and quieter PC.

Low-profile stylish heat spreader

Stand out from the crowd and show your style with FURY's asymmetrical signature heat spreader. Available in black, red and white with black PCB, FURY DDR4's low profile heat spreader will fit under oversized CPU coolers while enhancing heat dissipation for lasting reliability.

HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

DESCRIPTION
HyperX HX421C14FB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.

JEDEC/XMP TIMING PARAMETERS
JEDEC/PnP: DDR4-2133 CL14-14-14 @1.2V
XMP Profile #1: DDR4-2133 CL14-14-14 @1.2V

SPECIFICATIONS
CL(IDD) 14 cycles
Row Cycle Time (tRCmin) 46.5ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)  350ns(min.)
Row Active Time (tRASmin) 32.75ns(min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature  0oC to +85oC
Storage Temperature -55oC to +100oC

*Power will vary depending on the SDRAM used.

FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
Height 1.340" (34.04mm), w/o heatsink

Technical Specification

HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

General

Capacity 16 GB: 2 x 8 GB
Upgrade Type Generic

Memory

Speed 2133 MHz (PC4-17000)
Latency Timings CL14 (14-14-14)
Features Single rank, black heatsink, On-Die Termination (ODT), Serial Presence Detect (SPD), dual channel, Black PCB, low profile heatspreader, FURY asymmetric heatspreader, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0), unbuffered
Type DRAM
Technology DDR4 SDRAM
Form Factor DIMM 288-pin
Module Height (inch) 1.34
Data Integrity Check Non-ECC
Module Configuration 1024 x 64
Chips Organization 512 x 8
Voltage 1.2 V
Lead Plating Gold
RAM Performance SPD - 2133 MHz - 1.2 V - CL14 - 14-14-14 ¦ Intel Extreme Memory Profiles (XMP 2.0) - 2133 MHz - 1.2 V - CL14 - 14-14-14

Manufacturer Warranty

Service & Support Limited lifetime warranty (Russia - 10 years)

Miscellaneous

Colour Category Black

Product Reviews

Ask an Owner

HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

Sorry, customer questions are not available for this product.

Product Discussion

HyperX Fury 16GB (2X8GB) DDR4 2133MHz CL14 DIMM Black Memory Kit

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 138.99  inc. vat

£ 115.82 ex. vat

In Stock

{{#lists}}
  • {{ title }}
  • {{/lists}}