Ubiquiti UAP-AC-HD UniFi AC2500 Dual-Band MU-MIMO WiFi PoE Access Point
Finance from a month. ( APR) representative. Purchase 4 or more to qualify for business leasing

£ 320.26  inc. vat

£ 266.88 ex. vat

Ubiquiti UAP-AC-HD UniFi AC2500 Dual-Band MU-MIMO WiFi PoE Access Point

QuickFind: 836939 Mfr part code: UAP-AC-HD
  • Access Point
  • Dual Band
  • WiFi
  • PoE

Product Description

Ubiquiti UAP-AC-HD UniFi AC2500 Dual-Band MU-MIMO WiFi PoE Access Point

The Ubiquiti UAP-AC-HD UniFi AC2500 Simultaneous Dual-Band WiFi PoE Access Point is a revolutionary WiFi system that combines enterprise performance, unlimited scalability, and a central management controller. This Ubiquiti UniFi UAP-AC-HD, is an indoor/outdoor, high-performance, 802.11AC Wave 2 dual-band access point, capable of throughput speeds of up to 2533 Mbps and a maximum range of up to 122 meters. Engineered from the ground up to take advantage of 802.11AC Wave 2, the Ubiquiti UniFi AC HD provides unparalleled multi-user support. and can be easily installed using the included mounting hardware.


Easy to deploy and manage!
The Ubiquiti UAP-AC-HD UniFi AC2500 WiFi Access Point is fully provisioned prior to dispatch. So you simply connect it to your network via an Ethernet cable and away you go! Adding Access Points is simple! Just purchase any of the Unifi Cloud Controller Access Points to increase your WiFi network. They will be dispatched ready to join your network. With Ubiquiti UniFi's user management, you can see exactly who and where devices are connected to your WiFi network. You can monitor user bandwidth and block users if required.

 


Hosted Controller Features
- Cloud base service.
- Plug and go installation.
- One unified wireless network and single SSID.
- Multiple SSID support for Guest Networks etc.
- Remote management.
- User and Guest access.
- Remote Firmware Update.
- Email alerting of faults and problems.

 


802.11AC Wave 2 MU-MIMO
Initial 802.11AC Wave 1 SU-MIMO (Single-User, Multiple Input, Multiple Output) technology allows an earlier-generation access point to communicate with only one client at a time. The 802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology incorporated in to the Ubiquiti UAP-AC-HD UniFi access point allows for communication with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. The following describes a 5-client scenario:

- MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.

- 4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients: Four 1x1 clients, two 2x2 clients, one 2x2 client and two 1x1 clients, one 3x3 client and one 1x1 client.
- Real-World Performance Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the Ubiquiti UniFi AC HD AP delivers up to 125% greater performance than a typical Wave 1 AP.
- Client Compatibility For optimal performance, use MU-MIMO clients. SU-MIMO clients will also benefit and gain up to 10-20% greater performance when used with the Ubiquiti UniFi AC HD AP.

 


Scalable enterprise WiFi management
UniFi is the revolutionary WiFi system that combines enterprise performance, unlimited scalability, and a central management controller. The Ubiquiti UAP-AC-HD UniFi access point has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance. Use the UniFi Controller software to quickly configure and administer an enterprise WiFi network - no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.

 


The UniFi Controller is packed with features
You can use the UniFi Controller to provision thousands of UniFi APs, map out networks, quickly manage system traffic, and provision additional UniFi APs while using the RF map to monitor and analyse radio frequencies for optimal AP placement, configuration, and troubleshooting. Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.

Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology. The UniFi Controller also offers configurable reporting and analytics to manage large user populations and expedite troubleshooting.

Technical Specification

Ubiquiti UAP-AC-HD UniFi AC2500 Dual-Band MU-MIMO WiFi PoE Access Point

General

Device Type Radio access point
Width 22 cm
Depth 4.81 cm
Height 22 cm
Weight 700 g

Networking

Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 1.733 Gbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ac Wave 2
Frequency Band 2.4 GHz, 5 GHz
Capacity BSSIDs per radio: 1 - 4 ¦ Number of concurrent clients: 500+
Features Uplink, VLAN support, wall mountable, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), reset button, ceiling mountable, 4T4R MIMO technology
Encryption Algorithm AES, TKIP, WPA, WPA2, WPA-PSK, WEP
Authentication Method Basic Service Set Identifier (BSSID)
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac, IEEE 802.11ac Wave 2

Aerial

Antenna Internal
Antenna Qty 4

Expansion / Connectivity

Interfaces 2 x 1000Base-T (PoE+) - RJ-45

Miscellaneous

Included Accessories Mounting brackets
Compliant Standards IC, FCC

Power

Power Over Ethernet (PoE) Supported PoE+
Power Consumption Operational 17 Watt

Environmental Parameters

Min Operating Temperature -10 °C
Max Operating Temperature 70 °C
Humidity Range Operating 5 - 95% (non-condensing)

Product Reviews

Ask an Owner

Ubiquiti UAP-AC-HD UniFi AC2500 Dual-Band MU-MIMO WiFi PoE Access Point

Sorry, customer questions are not available for this product.

Product Discussion

Ubiquiti UAP-AC-HD UniFi AC2500 Dual-Band MU-MIMO WiFi PoE Access Point

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 320.26  inc. vat

£ 266.88 ex. vat

Finance from a month. ( APR) representative. Purchase 4 or more to qualify for business leasing
{{#lists}}
  • {{ title }}
  • {{/lists}}