Kolink Nimbus RGB Midi Tower Case - Black

£ 40.94  inc. vat

£44.34save £3.40

£ 34.11 ex. vat

£36.95save £2.84

Kolink Nimbus RGB Midi Tower Case - Black

QuickFind: 911576 Mfr part code: CA-03T-KK
  • ATX, Micro-ATX, Mini-ITX
  • 210 x 370 x 440 mm
  • Large air inlet in the front with RGB-LED surround for better airflow

Product Description

Kolink Nimbus RGB Midi Tower Case - Black

Cutting a striking figure amongst the highly competitive ATX-format segment, the Nimbus Midi-Tower from Kolink offers an RGB-LED strip rounding the large cut-out in the front - enabling a significant improvement in airflow. The hardware installed inside the case will also remain clear of dust thanks to the filter, which is important as users will also enjoy the opportunity to admire their hard-earned hardware through the tempered glass side. In spite of Kolink's use of solid tempered glass, the Kolink Nimbus still weighs only 4,58 Kg. The generous dimensions of the case not only help with airflow, they also allow users to install motherboards up to ATX in form factor. Graphics cards up to 325 mm long are compatible - meaning that the case is perfect for housing some seriously high-end gaming hardware.       
The Features of the Kolink Nimbus Midi-Tower at a Glance    
Designer case in black for motherboards up to ATX  Large air inlet in the front with RGB-LED surround for better airflow   Magnetic dust filters on the front, roof and bottom    4 mm thick tempered glass side panel  1x Pre-installed 120 mm fan, 6 possible in total  I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out, RGB-LED controller  Support for radiators up to 240 mm in front and roof  2x 3,5/2,5" drive slots, 2x slots for 2,5" drives on motherboard tray    Supports graphics cards up to 32,5 cm long & CPU coolers up to 16 cm    Tempered Glass Side Panel & Pre-Installed Fan  The robust chassis consists of one millimetre thick SECC steel and includes a four millimetre thick tempered glass side panel, with an aluminium-look plastic front. 
A large cut-out in the front has a digitally addressable RGB-LED strip included which can be both synced to compatible motherboards and controlled on the front panel. The magnetic dust filter located behind it helps keep the interior clean and dust free and allows for sufficient airflow.     
The interior has a black coating and utilises a power supply shroud to help maintain a clean aesthetic. Beneath this, users will find a non-removable drive cage with brackets for two 3,5- or 2,5" drives as well as space for the power supply itself. Two additional slots for 2,5" drives are located to the rear of the motherboard tray.  Dust Filters Keep the Kolink Nimbus Clean  In order to keep your gaming hardware supplied with a continuous stream of cool, fresh air - one (of a possible total of six) 120 mm fan in black is included with the case and installed in the rear. The front of the case supports up to three 120 mm fans, the roof of the case allows for two further 120 mm fans. The front of the case supports two 140 mm fans.    A 240 mm radiator can be installed in the front and the roof. The motherboard tray and the PSU cover include various openings for all the cable management options you could ask for. The air inlets located in the roof and underside of the case also include a fine mesh. These are magnetic and utilise a honeycomb-structure design to add strength.    Graphics cards up to 32,5 cm with CPU coolers up to 16 cm are both supported. Additionally, the I/O panel located on the front of the case includes two USB 2.0 ports along with a USB 3.0 Type-A port. A switch for controlling the RGB lighting is also available. 

Technical Specification

Kolink Nimbus RGB Midi Tower Case - Black

General

Form Factor Tower
Max Mainboard Size ATX
Supported Motherboards ATX, microATX, Mini-ITX
Specification Compliance ATX
Internal Bays Qty 4
Product Material Plastic, steel, tempered glass
Colour Black
Cooling System Front: 120 mm fan mount x 3 ¦ Top: 120/140 mm fan mount x 2 ¦ Rear: 120 mm fan x 1
CPU Cooler Max Height 160 mm
Video Card Max Length 325 mm
Power Supply Max Length 160 mm
System Cabinet Features Supports 240 mm radiator in top, bottom magnetic dust filter, top magnetic dust filter, RGB illumination, RGB button, supports 240 mm radiator in front

Expansion / Connectivity

Expansion Bays 2 (total) / 2 (free) x internal - 2.5" / 3.5" shared ¦ 2 (total) / 2 (free) x internal - 2.5"
Expansion Slots 7
Interfaces 1 x USB 3.0 ¦ 2 x USB 2.0 ¦ 1 x audio line-in/headphones - mini-jack

Power

Power Device No power supply

Dimensions & Weight

Width 21 cm
Depth 37 cm
Height 44 cm
Weight 4.58 kg

Product Reviews

Ask an Owner

Kolink Nimbus RGB Midi Tower Case - Black

Sorry, customer questions are not available for this product.

Product Discussion

Kolink Nimbus RGB Midi Tower Case - Black

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

£ 40.94  inc. vat

£44.34save £3.40

£ 34.11 ex. vat

£36.95save £2.84
{{#lists}}
  • {{ title }}
  • {{/lists}}

    Add-ons and Accessories

    Accessories

    EG LED Strip White - 50cm

    £1.67 inc. vat
    £3.99save £2.32
    £1.39 ex. vat
    £3.32save £1.93

    PSU

    Thermaltake Litepower 550W PSU

    £37.98 inc. vat
    £31.65 ex. vat

    Thermaltake Litepower 450W PSU

    £34.98 inc. vat
    £29.15 ex. vat

    Thermaltake Litepower 650W PSU

    £41.99 inc. vat
    £34.99 ex. vat