HPE ProLiant DL385 Gen10 Entry - Rack-Mountable - 2U - 2 Way - EPYC 7262 3.2 GHz - 16GB

QuickFind: 973843 Mfr part code: P16692-B21
  • 1 x AMD EPYC 7262 / 3.2 GHz (3.4 GHz) (8-core)
  • Hot-swap 2.5"
  • 16 GB DDR4 SDRAM
  • No optical drive/ No HDD
  • GigE
Cashback deal

Cashback deal available with this product until 31st Jan 2021

Claim up to £450 Cashback on qualifying HPE ProLiant Servers when purchased with a qualifying Microsoft ROK License (Terms & Conditions Apply) Click here to learn more

Product Description

HPE ProLiant DL385 Gen10 Entry - Rack-Mountable - 2U - 2 Way - EPYC 7262 3.2 GHz - 16GB

Do you need a platform purpose-built to address your virtualized and memory-centric workloads? Try something EPYC. Hewlett Packard Enterprise is extending the worlds'most secure industry standard servers to include the HPE ProLiant DL385 Gen10 Server,utilizing the AMD EPYC 7000 Series processors. This platform has been designed with the security you need and the flexibility you require to accommodate the most demanding enterprise workloads. The HPE ProLiant DL385 Gen10 Server delivers a low cost virtual machine (VM) with unprecedented security.
  • Security
  • HPE ProLiant DL385 Gen10 Server has security protection built in across the server life cycle starting with Silicon Root of Trust. Only Hewlett Packard Enterprise offers industry standard servers with major firmware anchored directly into the silicon. Millions of lines of firmware code run before server operating system boots. Secure Recovery allows server firmware to roll back to the last known good state or factory settings after detection of compromised code. The AMD EPYC processor provides several security related features,including AMD secure processor,secure memory encryption (SME),and secure encrypted virtualization (SEV). These features are used to help enable key security functionality including Secure Root-of-Trust,Secure Run,and Secure Move.
  • Flexible design
  • HPE ProLiant DL385 Gen10 Server has an adaptable chassis,including the modular drive bays that can be configured with up to 30 SFF,up to 19 LFF or up to 24 NVMe drive options along with support for up to 3 double wide GPU options. HPE Smart Array S100i Software RAID ships standard for embedded m.2 boot,and the redesigned HPE Smart Array Essential and Performance RAID Controllers for performance or additional features including the ability to operate in both SAS and HBA mode. This server supports a wide range of operating systems making it suitable for most environments.

Technical Specification

HPE ProLiant DL385 Gen10 Entry - Rack-Mountable - 2U - 2 Way - EPYC 7262 3.2 GHz - 16GB

Cache Memory

Installed Size L3 Cache - 128 MB
Installed Size_old L3 Cache - 128 MB
Cache Per Processor 128 MB

RAM

Installed Size 16 GB / 1 TB (max)
RAM Supported PC4-21333 - 4 TB Load-Reduced ¦ PC4-21333 - 1 TB registered
Technology DDR4 SDRAM
Form Factor DIMM 288-pin
Slots 32 (Total) / 31 (empty)
Features Registered, dual channel memory architecture, HPE SmartMemory, slots 17 - 32 are available in two-processor configuration only
Configuration Features 1 x 16 GB

General

Type Server
Product Form Factor Rack-mountable - 2U
Built-in Devices Led panel, battery
Server Scalability 2-way
Front Accessible Bays Qty 1
Hot-Swap Bays Qty 8

Processor / Chipset

CPU AMD EPYC 7262 / 3.2 GHz
Max Turbo Speed 3.4 GHz
Number of Cores 8-core
CPU Qty 1
Max CPU Qty 2
CPU Upgradability Upgradable

Hard Drive

Type No HDD

Storage Controller

Type 1 x RAID - PCIe 3.0 x8
Controller Interface Type SATA 6Gb/s / SAS 12Gb/s
Storage Controller Name HPE Smart Array P408i-a
Channel Qty 8
RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, RAID 60, RAID 1 ADM, RAID 10 ADM
Buffer Size 2 GB

Optical Storage

Type No optical drive

Card Reader

Type Card reader
Supported Flash Memory Cards microSD

Monitor

Monitor Type None.

Graphics Controller

Video Memory 16 MB
Video Interfaces VGA, DisplayPort

Networking

Ethernet Ports 4 x Gigabit Ethernet
Ethernet Controller HPE 366FLR
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Remote Management Protocol SNMP 3, IPMI 2.0, SMASH CLP
Remote Management Controller Integrated Lights-Out 5
Features Wake on LAN (WoL), PXE support

Expansion / Connectivity

Bays 1 (total) / 0 (free) x external Universal Media Bay ¦ 8 (total) / 8 (free) x hot-swap 2.5" SFF
Slots 1 (total) / 1 (free) x microSD Card (internal) ¦ 1 (total) / 1 (free) x PCIe 3.0 x8 - full-length, full-height ¦ 1 (total) / 1 (free) x PCIe 3.0 x16 - full-length, full-height ¦ 1 (total) / 0 (free) x PCIe 3.0 x8 - half-length, full-height ¦ 1 (total) / 1 (free) x FlexibleLOM
Interfaces 1 x HP iLO (service port) ¦ 1 x HP iLO ¦ 3 x USB 3.0 (1 front, 2 rear) ¦ 4 x LAN (Gigabit Ethernet) ¦ 1 x VGA ¦ 1 x DisplayPort

Miscellaneous

Included Accessories HPE Easy Install Rails, 4 standard fans
Compliant Standards AES, TLS v1.2, ASHRAE Class A4, ASHRAE Class A3, WEEE 2002/95/EC

Power

Device Type Power supply - hot-plug
Power Redundancy Yes
Power Redundancy Scheme 1+1
Installed Qty 1
Max Supported Qty 2
Nominal Voltage AC 120/230 V (50/60 Hz)
Power Provided 800 Watt
80 PLUS Certification 80 PLUS Platinum
Efficiency 94%

Operating System / Software

OS Provided No operating system
OS Certified Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016, SuSE Linux Enterprise Server 12 SP3, Red Hat Enterprise Linux 7.4, VMware ESXi 6.5 update 1, VMware ESXi 6.5 update 2, VMware ESXi 6.7

Environmental Standards

ENERGY STAR Certified Yes
ENERGY STAR Version 2.1

Manufacturer Warranty

Service & Support Limited warranty - parts and labour - 3 years - on-site - response time: next business day

Dimensions & Weight

Width 44.55 cm
Depth 67.94 cm
Height 8.73 cm
Weight 14.9 kg

Environmental Parameters

Min Operating Temperature 10 °C
Max Operating Temperature 35 °C
Humidity Range Operating 8 - 90% (non-condensing)
Sound Emission 37 dBA

Product Reviews

Ask an Owner

HPE ProLiant DL385 Gen10 Entry - Rack-Mountable - 2U - 2 Way - EPYC 7262 3.2 GHz - 16GB

Sorry, customer questions are not available for this product.

Product Discussion

HPE ProLiant DL385 Gen10 Entry - Rack-Mountable - 2U - 2 Way - EPYC 7262 3.2 GHz - 16GB

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Sorry, this product is currently out of stock.

Enter your email address below if you would like to be informed when this product is back in stock.

By entering your email address here you are agreeing that you would like to be notified when this product is back in stock and you have read and agree to our privacy policy

Add-ons and Accessories

Server Essentials

Windows Server 2019 Essentials (Fujitsu ROK)

£365.99 inc. vat
£304.99 ex. vat

Windows Server 2019 Essentials (HPE ROK)

£321.87 inc. vat
£268.22 ex. vat

Windows Server 2019 Essentials (Dell ROK)

£308.99 inc. vat
£257.49 ex. vat

Server Standard

Windows Server 2019 Standard Edition (Fujitsu ROK)

£787.98 inc. vat
£656.65 ex. vat

Windows Server 2019 Standard (Dell ROK) - 634-BSFX

£689.99 inc. vat
£574.99 ex. vat

Windows Server 2019 Standard Edition (HPE ROK)

£698.99 inc. vat
£582.49 ex. vat