HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000

£ 440.99  inc. vat

£ 367.49 ex. vat

HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000

QuickFind: 509421 Mfr part code: J9781A
Aruba
  • Networking Product Advice:
  • 01430 433 671 or Solutions@Ebuyer.com
  • 8 x 10/ 100 + 2 x combo Gigabit SFP
  • Rack-mountable
HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000
HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000 thumbnail

Product Description

HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000

The HP 2530-48 (J9781A) is a fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks. Designed for entry-level to midsize enterprise networks the HP 2530-48 (J9781A) Fast Ethernet switches deliver full Layer 2 capabilities with enhanced access security, traffic prioritisation, and IPv6 host support.
Features
  • Quality of Service (QoS)
    • Traffic prioritisation (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
    • Simplified QoS configuration: Port-based: prioritises traffic by specifying a port and priority level. VLAN-based: prioritises traffic by specifying a VLAN and priority level.
    • Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
    • Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
    • Layer 4 prioritisation: enables prioritisation based on TCP/UDP port numbers
  • Management
    • Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
    • Virtual stacking: provides single IP address management for up to 16 switches
    • sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
    • IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications
    • Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
  • Connectivity
    • IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
    • Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports
  • Layer 2 switching
    • VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
    • 16K MAC address table: provides access to many Layer 2 devices
    • GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs

Technical Specification

HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000

Expansion / Connectivity
Interfaces 2 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 2 x SFP (mini-GBIC) ¦ 1 x management RJ-45 ¦ 48 x 10Base-T/100Base-TX - RJ-45

Power
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)

Miscellaneous
Width 44.2 cm
Depth 24.64 cm
Height 4.45 cm
Weight 2.86 kg
Compliant Standards FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, VCCI Class A ITE, EN 61000-3-3, EN55024, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825, CSA C22.2 No. 60950-1, EN 55022 Class A

General
Interfaces Fast Ethernet
Jumbo Frame Support 9220 bytes
Enclosure Type Desktop, rack-mountable, wall-mountable 1U
Performance Throughput: up to 13 Mpps ¦ Switching capacity: 17.6 Gbps
Capacity MAC addresses: 16000
Processor 1 x ARM: 800 MHz
RAM 256 MB DDR3 SDRAM
Device Type Switch - 48 ports - Managed
Subtype Fast Ethernet
Ports 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000
MAC Address Table Size 16000 entries
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH-2, CLI
Encryption Algorithm SSL
Authentication Method RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features Flow control, DHCP support, BOOTP support, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), port mirroring, IPv6 support, half duplex mode, full duplex mode, SNTP support, sFlow, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), STP Root Guard, LLDP support, Class of Service (CoS), Generic Attribute Registration Protocol (GARP)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3az
Flash Memory 128 MB

Manufacturer Warranty
Service & Support Limited warranty - lifetime
Service & Support Details Limited warranty - lifetime

Dimensions & Weight
Width 44.2 cm
Depth 24.64 cm
Height 4.45 cm
Weight 2.86 kg

Environmental Parameters
Min Operating Temperature 0 °C
Max Operating Temperature 45 °C
Humidity Range Operating 15 - 95% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 70 °C
Humidity Range Storage 15 - 90% (non-condensing)

Product Reviews

Ask an Owner

HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000

Sorry, customer questions are not available for this product.

Product Discussion

HPE 2530-48 Managed L2 Switch - 48 x 10/100 + 2 x Gigabit SFP + 2 x 10/100/1000

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

£ 440.99  inc. vat

£ 367.49 ex. vat

0% Interest offers available learn more
  • In Stock
Add to Wish List
{{#lists}}
  • {{ title }}
    • {{/lists}}
    • 0% Interest for 4 months
    • Finance from £21.17 a month
      (14.9% APR) representative.
    • Make 3 payments of £147.00. No fees.
    • Finance from a month
      () representative.

    Add-ons and Accessories

    Xenta Cat 6 Cables

    Xenta Cat6 Snagless UTP Patch Cable (Black) 15m

    £4.25 inc. vat
     £3.54 ex. vat

    Customers Also Viewed

    Kyocera TK 865K Black Toner cartridge
    Kyocera TK 865K Black Toner cartridge
    • For use with KYocera TASKalfa 300ci,TASKalfa 250ci
    • Approx 20,000 Pages
    • Black

    £ 76.49  inc. vat

    £ 63.74 ex. vat

    Cisco Catalyst 2960X-48LPS-L Managed POE+ Switch
    Cisco Catalyst 2960X-48LPS-L Managed POE+ Switch
    • Networking Product Advice:
    • 01430 433 671 or Solutions@Ebuyer.com
    • 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP

    £ 3,533.98  inc. vat

    £ 2,944.98 ex. vat

    Dell Networking X1052 48 ports Managed Switch Rack-mountable
    Dell Networking X1052 48 ports Managed Switch Rack-mountable
    • Networking Product Advice:
    • 01430 433 671 or Solutions@Ebuyer.com
    • Switch

    £ 466.98  inc. vat

    £ 389.15 ex. vat