HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

£ 58.49  inc. vat

£62.99save £4.50

£ 48.74 ex. vat

£52.49save £3.75

HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

QuickFind: 633819 Mfr part code: HX318C10FK2/8
  • Easy to install
  • 2 x 4GB sticks (8GB kit)
  • features plug-and-play functionality
  • Automatic overclocking
  • Reliable 100% factory tested

Product Description

HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

SPECIFICATIONS
CL(IDD) 10 cycles
Row Cycle Time (tRCmin) 44.75ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 32.125ns (min.)
Maximum Operating Power TBD W* (per module)
UL Rating 94 V - 0
Operating Temperature 0oC to 85o C
Storage Temperature -55oC to +100o C
*Power will vary depending on the SDRAM used.

FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 933MHz fCK for 1866Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180" (30.00mm), single sided component

Technical Specification

HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

General

Capacity 8 GB: 2 x 4 GB
Upgrade Type Generic

Memory

Speed 1866 MHz (PC3-14900)
Latency Timings CL10 (10-10-10-30)
Features Black PCB, FURY asymmetric heatspreader, unbuffered
Type DRAM
Technology DDR3 SDRAM
Form Factor DIMM 240-pin
Module Height (inch) 1.29
Data Integrity Check Non-ECC
Module Configuration 512 x 64
Voltage 1.5 V
Lead Plating Gold

Manufacturer Warranty

Service & Support Limited lifetime warranty (Russia - 10 years)

Expansion / Connectivity

Compatible Slots 2 x memory - DIMM 240-pin

Miscellaneous

Colour Category Blue

Product Reviews

Ask an Owner

HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

Sorry, customer questions are not available for this product.

Product Discussion

HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.
Free delivery*

£ 58.49  inc. vat

£62.99save £4.50

£ 48.74 ex. vat

£52.49save £3.75
{{#lists}}
  • {{ title }}
  • {{/lists}}
    Click & Collect available for this product.