£ 233.99 inc. vat
£ 194.99 ex. vat
Click & Collect Unavailable
(14.9% APR) representative
Startech.com 1-Port 10G Ethernet Network Card
- Up to 20Gbps (full duplex) bandwidth
- Compliant with 10GBase-T and NBASE-T specifications
- Fully compliant with IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u...
Mfr part code: ST10000SPEXI
Startech.com 1-Port 10G Ethernet Network Card Product Description
Here's a powerful and cost-effective solution for upgrading your server or workstation to 10 Gigabit Ethernet networking over copper. This PCI Express 10G NIC lets you add an Ethernet port to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G 1G and 100Mbps.
Reliable, high-performance connectivity
This 10G network card utilizes the Intel® X550-AT chipset, delivering the power, performance and enhanced capabilities you need for dependable network connections. Compliant with IEEE 802.3u/ab/an standards, the 1-port 10G card delivers a dependable way to upgrade or replace your existing network port, providing throughput capability of up to 10Gbps in each direction (20Gbps total). It connects easily through a single, four-lane (x4 or higher) PCI Express slot.
The Intel X550-AT chipset provides many advanced features including Intel® Virtualization Technology for connectivity and PXE network boot support. The Intel chipset provides many advanced features to support load-balancing the flow of network traffic, to enhance throughput and provide greater data reliability. It supports Audio-Video Bridging (AVB) to enable tightly controlled media stream synchronization, buffering and resource reservation. It also lets you take advantage of advanced features such as VLAN tagging, up to 15K jumbo frame support and Auto MDIX.
Cost-effective and versatile multimode connectivity
This five-speed NIC provides a cost-effective and versatile networking solution, by giving you the additional bandwidth your network needs without having to overhaul your infrastructure wiring. It lets you add an Ethernet port which can be accessed at multiple speeds 10G, 5G, 2.5G 1G and 100Mbps. Compatible with a broad range of operating systems, the 10G NIC is fully compliant with 10GBase-T and NBASE-T™ specifications. (10G network speeds require Cat6a cable. All other speeds require Cat5e cable.)
The PCIe 10G network card features advanced NBASE-T technology, supporting the latest multigigabit equipment, including new Cisco® campus switches and Aruba Networks® access points. The card enables you to connect to NBASE-T based equipment (with Linux® only) at network speeds of 2.5Gbps or 5Gbps, over your existing Cat5e infrastructure, without having to upgrade to more expensive Cat6a. The Ethernet network card also supports the more common 10G over copper, and 1G network connections using existing Cat 6/Cat5e or better cabling.
With its dual-profile design, the network card is easy to install into a wide range of computer/server chassis, regardless of form factor. The card comes equipped with a full-sized bracket, and includes a low-profile/half-height installation bracket that you can use as needed.
|Ports||10Gb Ethernet x 1|
|Cabling Type||Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 10GBase-T|
|Data Link Protocol||100Mb LAN, GigE, 10 GigE|
|Data Transfer Rate||10 Gbps|
|Performance||Bandwidth (full duplex): 20 Gbps|
|Capacity||Jumbo frame size: 9000|
|Features||Flow control, full duplex mode, Jumbo Frames support, PXE support, tagged VLAN|
|Compliant Standards||IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3an||
|Device Type||Network adapter|
|Form Factor||Plug-in card - low profile|
|Interface (Bus) Type||PCI Express 2.0||
Processor / Memory
|Processor||X550-AT - Intel||
Expansion / Connectivity
|Interfaces||1 x 10GBase-T - RJ-45||
|Included Accessories||Low-profile bracket|
|Compliant Standards||FCC, RoHS|
Software / System Requirements
|Software Included||Drivers & Utilities|
|OS Required||Linux 2.4.x, Linux 2.6.x, Microsoft Windows Server 2012, Linux 3.x, Microsoft Windows Server 2008 R2 (64-bits), VMware ESXi 5.1, VMware ESXi 5.5, Microsoft Windows Server 2012 R2 (64-bit), Microsoft Windows 7 / 8 / 8.1 / 10 (64 bits), VMware ESXi 6.0||
Dimensions & Weight
|Service & Support||Limited warranty - 2 years||
|Min Operating Temperature||5 °C|
|Max Operating Temperature||50 °C|
|Humidity Range Operating||20 - 80%|
Startech.com 1-Port 10G Ethernet Network Card Ask an owner
Startech.com 1-Port 10G Ethernet Network Card Product Discussion
Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.
- This tool is open to everyone.
- You are responsible for the contents of your comments and any consequences that may arise as a result of them.
- Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.