Cisco Business 140AC - Mesh Starter Kit - Radio Access Point - 2 x Cisco Business 142ACM Mesh Extend

£ 282.99  inc. vat

£ 235.82 ex. vat

Cisco Business 140AC - Mesh Starter Kit - Radio Access Point - 2 x Cisco Business 142ACM Mesh Extend

QuickFind: 1261198 Mfr part code: CBW140MXS-E-UK
  • Mesh Starter Kit
  • Radio access point
  • 802.11ac Wave 2
  • Wi-Fi 5
  • 2.4 GHz, 5 GHz

Product Description

Cisco Business 140AC - Mesh Starter Kit - Radio Access Point - 2 x Cisco Business 142ACM Mesh Extend

The Cisco Business 140AC access point delivers advanced wireless performance with support for the Wi-Fi standard,IEEE's 802.11ac Wave 2. It also meets the growing flexibility requirements of wireless networks by introducing mesh technology - all while delivering a simple user experience.

The 140AC access point extends coverage and capacity to Wi-Fi clients such as smartphones,tablets,and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.

By adhering to the 802.11ac Wave 2 standard,the Cisco Business 140AC access point delivers a data rate of up to 867 Mbps on its 5-GHz radio. This exceeds the data rates offered by access points that support the 802.11n standard. It also enables a total aggregate dual-radio data rate of up to 1 Gbps,providing the necessary foundation to stay ahead of the performance expectations and needs of wireless users.

In recent years,small businesses have increasingly preferred wireless access as the principal form of network connectivity. Along with this shift,there is an expectation that wireless should enable a high-performance experience. The Cisco Business 140AC access point delivers outstanding performance for highly secure and reliable wireless connections,for an optimal end-user experience.
  • MU-MIMO
  • Multi-User (MU) Multiple-Input Multiple-Output (MU-MIMO) technology allows transmission of data to multiple 802.11ac Wave 2 - capable clients simultaneously to improve the client experience. Prior to MU-MIMO,802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time,typically referred to as Single-User MIMO (SU‑MIMO). 802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode,offering 867-Mbps rates for more capacity and reliability than competing access points.
  • Simplified management
  • Deploy and configure multiple Cisco Business access points and mesh extenders easily without a physical controller,using Cisco Business Mobile app.
  • Mesh technology support
  • Mix and match Cisco Business mesh extenders or access points to increase Wi-Fi coverage throughout your business.
  • Flexible deployment
  • Flexible deployment models supporting multiple concurrent use cases required by small businesses,including point of sale systems,surveillance cameras,guest access,and more.

Technical Specification

Cisco Business 140AC - Mesh Starter Kit - Radio Access Point - 2 x Cisco Business 142ACM Mesh Extend

General

Device Type Radio access point
Width 15.08 cm
Depth 15.08 cm
Height 3.3 cm
Weight 400 g
Localisation United Kingdom
Bundled with 2 x Cisco Business 142ACM Mesh Extender

Processor / Memory / Storage

Processors Installed 710 MHz
RAM 1 GB
Flash Memory 256 MB

Networking

Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 1 Gbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Frequency Band 2.4 GHz, 5 GHz
Performance Maximum data rate (2.4 GHz): 300 Mbps ¦ Maximum data rate (5 GHz): 867 Mbps
Capacity Wireless clients per Wi-Fi radio: 200 ¦ Wireless clients: 400 ¦ VLANs supported: 16
Status Indicators Status
Features VLAN support, manageable, DFS support, wall mountable, Mesh networking, Wi-Fi Multimedia (WMM) support, RADIUS support, ceiling mountable, 802.1x authentication, MU-MIMO technology, SU-MIMO technology, Authentication, Authorization and Accounting (AAA)
Encryption Algorithm AES, TLS, PEAP, TTLS, WPA2, WPA3
Authentication Method RADIUS, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.11r, IEEE 802.11ac Wave 2

Aerial

Antenna Internal

Expansion / Connectivity

Interfaces 1 x 1000Base-T (PoE) - RJ-45

Miscellaneous

Included Accessories Torx security screw, ceiling rail mount clip, mounting bracket
Compliant Standards VCCI, ICES-003, FCC Part 15.247, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, FCC Part 15.407, ARIB STD-T66, ARIB STD-T71, EN 300 328, EN 50385, FCC OET Bulletin 65c, EN 301 489-1, RSS-247, EN 301 893, CAN/CSA-C22.2 No. 60950-1, EMI Class B, EN 301 489-17

Power

Power Over Ethernet (PoE) Supported PoE
Power Consumption Operational 8.3 Watt

Manufacturer Warranty

Service & Support Limited warranty - replacement - lifetime

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 50 °C
Humidity Range Operating 10 - 90% (non-condensing)

Product Reviews

Ask an Owner

Cisco Business 140AC - Mesh Starter Kit - Radio Access Point - 2 x Cisco Business 142ACM Mesh Extend

Sorry, customer questions are not available for this product.

Product Discussion

Cisco Business 140AC - Mesh Starter Kit - Radio Access Point - 2 x Cisco Business 142ACM Mesh Extend

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

£ 282.99  inc. vat

£ 235.82 ex. vat

0% Interest offers available learn more
{{#lists}}
  • {{ title }}
  • {{/lists}}