HPE FlexFabric Manageable Layer 3 Switch

QuickFind: 1144668 Mfr part code: JQ074A
  • 3 Layer Supported
  • Modular
  • Optical Fiber
  • 1U High
  • Rack-mountable

Product Description

HPE FlexFabric Manageable Layer 3 Switch


HPE FlexFabric Manageable Layer 3 Switch - 3 Layer Supported - Modular - Optical Fiber - 1U High - Rack-mountable
The HPE FlexFabric 5945 Switch Series are high-density, ultra-low-latency, and top-of-rack (ToR) switches ideally suited for deployment at the aggregation or server access layer of large enterprise data centers, the HPE 5945 is also powerful enough for deployment at the core layer of medium-sized enterprises. With the increase in virtualized applications and server-to-server traffic, customers require spine and ToR switches that can meet their throughput requirements. With the HPE 5945, data centers can now support up to 100GbE per port, allowing high performance server connectivity and the capabilities to handle virtual environments. The HPE FlexFabric 5945 Switch Series provides choices that fit your budget and IT environment by cut-through with ultra-low-latency and wire speed, offering different port density and speeds 100GbE/40GbE/25GbE/10GbE spine/ ToR connectivity.
What's new
  • High-density 100GbE/40GbE/25GbE/10GbE spine/top-of-rack (ToR) connectivity.
  • HPE FlexFabric Network Analytics solution supporting real time microburst detection.
  • VXLAN, VTEP, and OVSDB support for virtualized environments.
  • Cut-through switching with ultra-low-latency and wire speed performance.
  • IPv6 support with full Layer 2 and Layer 3 features.

Features
High-density, Advanced, Data Center Switches with HPE FlexFabric Network Analytics
The HPE FlexFabric 5945 Switch Series enables customers to scale their server-edge 10/40/100GbE top-of-rack (ToR) deployments with high-density 48 x 10GbE (SFP or BASE-T) with 6 x 40GbE ports, 48 x 10GbE (SFP or BASE-T) with 6 x 100GbE ports, and 32 x 40GbE ports, delivered in a 1RU design.
Available with a 2-slot modular version delivering two 40GbE ports and a 4-slot modular version with four 40GbE ports.
Includes HPE FlexFabric Network Analytics, which in conjunction with the HPE IMC Virtual Application Networking Fabric Manager, delivers real time visibility of microburst network congestion which negatively impacts overall network operations and performance.
High-performance Data Center Switching
The HPE FlexFabric 5945 Switch Series delivers up to 2.56 Tbps switching capacity for demanding data center applications.
Supports up to 1904 MPPS throughput for data-intensive environments.
Low latency, under 1µs for 40GbE, delivering increased network throughput.
VXLAN support for network virtualization and overlay solutions for improved flexibility. Includes Open vSwitch Database (OVSDB) for dynamic VXLAN tunnel management.
Business Agility and Resilience with Hewlett Packard Enterprise Comware 7
The HPE FlexFabric 5945 Switch Series delivers Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) with <50 msec convergence time enabling faster application response time.
The In-Service Software Update (ISSU) enables high availability with modular updates accomplished without a reboot or power cycle, in the background.
Simplicity and Lower TCO
HPE FlexFabric 5945 Switch Series simplifies switch management by up to 88% with 9-unit Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF).
No hidden costs with simple one license per switch for all operating system features.
All switch ports are active and ready to use without the need for activation licenses.

Technical Specification

HPE FlexFabric Manageable Layer 3 Switch

General

Device Type Switch - 48 ports - L3 - Managed
Enclosure Type Rack-mountable 1U
Subtype 100 Gigabit Ethernet
Ports 48 x 25 Gigabit SFP28 + 8 x 100 Gigabit QSFP28 + 2 x Gigabit SFP
Performance Latency (64-byte packets): 1 µs ¦ Throughput: 2 Tbps ¦ Routing/switching capacity: 2024 Mpps
Capacity IPv4 routing table entries: 128000 ¦ IPv6 routing table entries: 84000 ¦ Virtual interfaces (VLANs): 4096
MAC Address Table Size 288K entries
Jumbo Frame Support 9416 bytes
Routing Protocol OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMP, VRRP, OSPFv2, IGMPv3, OSPFv3, static IPv6 routing, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD), BGP+
Remote Management Protocol SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Authentication Method Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2)
Features Flow control, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, packet filtering, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, IPv6 support, SNTP support, Weighted Fair Queuing (WFQ), sFlow, PIM snooping, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, tunnelling, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Quality of Service (QoS), Committed Access Rate (CAR), Jumbo Frames support, Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), IPv4 support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), Port Security, Data Center Bridging (DCB), Management Information Base (MIB), NTP time synchronisation, FCoE forwarding, Ingress Layer 2 MAC Access Control Lists (ACLs), Class of Service (CoS), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), FCoE support, In-Service Software Upgrade (ISSU), 32MB packet buffer, UDP shaping, Network Timing Protocol (NTP), Weighted Deficit Round Robin (WDRR), Top-of-Rack (ToR), 5 fan tray slots
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qaz, IEEE 802.3ag
RAM 8 GB SDRAM
Flash Memory 1 GB

Expansion / Connectivity

Interfaces 48 x 25Gbit LAN SFP28 ¦ 8 x 100Gbit LAN QSFP28 ¦ 2 x Gigabit LAN SFP ¦ 1 x console (mini-USB) RJ-45 ¦ 1 x serial (console) ¦ 1 x management SFP ¦ 1 x USB ¦ 1 x management

Power

Power Device Internal power supply - hot-plug
Installed Qty 0 (installed) / 2 (max)
Power Redundancy Optional
Power Redundancy Scheme 1+1 (with optional power supply)

Miscellaneous

Compliant Standards CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, VCCI Class A, FCC CFR47 Part 15 A, FDA 21 CFR, AS/NZS CISPR 32 Class A, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, ETSI EN 300 386

Software / System Requirements

OS Required Comware v7

Dimensions & Weight

Width 44 cm
Depth 46 cm
Height 4.36 cm
Weight 10.1 kg

Dimensions & Weight (Shipping)

Shipping Weight 15 kg

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 45 °C
Humidity Range Operating 5 - 95% (non-condensing)

Product Reviews

Ask an Owner

HPE FlexFabric Manageable Layer 3 Switch

Sorry, customer questions are not available for this product.

Product Discussion

HPE FlexFabric Manageable Layer 3 Switch

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Call for Pricing

This product may require special order or configuration. Please contact our sales team for pricing or further information.

{{#lists}}
  • {{ title }}
  • {{/lists}}

    Add-ons and Accessories

    Xenta Cat 6 Cables

    Xenta Cat6 Snagless UTP Patch Cable (Black) 5m

    £3.30 inc. vat
    £2.75 ex. vat